stress and deformation
Recently Published Documents


TOTAL DOCUMENTS

1164
(FIVE YEARS 275)

H-INDEX

33
(FIVE YEARS 5)

2022 ◽  
Vol 12 (2) ◽  
pp. 779
Author(s):  
Carlos Aurelio Andreucci ◽  
Abdullah Alshaya ◽  
Elza M. M. Fonseca ◽  
Renato N. Jorge

A new biomechanism, Bioactive Kinetic Screw (BKS) for screws and bone implants created by the first author, is presented using a bone dental implant screw, in which the bone particles, blood, cells, and protein molecules removed during bone drilling are used as a homogeneous autogenous transplant in the same implant site, aiming to obtain primary and secondary bone stability, simplifying the surgical procedure, and improving the healing process. The new BKS is based on complex geometry. In this work, we describe the growth factor (GF) delivery properties and the in situ optimization of the use of the GF in the fixation of bone screws through a dental implant. To describe the drilling process, an explicit dynamic numerical model was created, where the results show a significant impact of the drilling process on the bone material. The simulation demonstrates that the space occupied by the screw causes stress and deformation in the bone during the perforation and removal of the particulate bone, resulting in the accumulation of material removed within the implant screw, filling the limit hole of the drill grooves present on the new BKS.


2022 ◽  
Vol 2022 ◽  
pp. 1-13
Author(s):  
Lijun Zhang ◽  
Yongchao Dong ◽  
Dejian Meng ◽  
Wenbo Li

In recent years, the problem of automotive brake squeal during steering braking has attracted attention. Under the conditions of squealing, the loading of sprung mass is transferred, and lateral force is generated on the tire, resulting in stress and deformation of the suspension system. To predict the steering brake squeal propensity and explore its mechanism, we established a hybrid model of multibody dynamics and finite element methods to transfer the displacement values of each suspension connection point between two models. We successfully predicted the occurrence of steering brake squeal using the complex eigenvalue analysis method. Thereafter, we analyzed the interface pressure distribution between the pads and disc, and the results showed that the distribution grew uneven with an increase in the steering wheel angle. In addition, changes in the contact and restraint conditions between the pads and disc are the key mechanisms for steering brake squeal.


Author(s):  
Juraj Králik ◽  
Juraj JR. Králik

This paper presents the authors' experience of teaching the finite element method (FEM) at university. With the development of computational tools in the second half of the twentieth century, there was also the development of computational methods focused on the algorithmization of engineering tasks based on FEM. From the solution of individual problems of the state of stress and deformation from the influence of the external environment, a complex solution of the mutual interaction of the system of deformable bodies (elements) has been performed while improving the physical and geometric characteristics of modern materials and structures. Many processes in the automatic design system take place as if in a "black box" and the process of verifying the achieved results becomes the most important stage in the design activity. Without knowledge of the theoretical basis of FEM, physical and mathematical modeling, verification procedures and methods, the design of a structure cannot be safe and reliable. In this paper we present one of the possibilities how the student can get acquainted with the theoretical foundations of FEM and with computational procedures using ANSYS software.


2022 ◽  
Vol 12 (2) ◽  
pp. 621
Author(s):  
Jianxiu Wang ◽  
Ansheng Cao ◽  
Zhao Wu ◽  
Zhipeng Sun ◽  
Xiao Lin ◽  
...  

The excavation of a shallow buried tunnel may cause stress redistribution in surrounding rock, and cause deformation, damage, and even destruction of adjacent underground pipelines. The land part of the Haicang undersea tunnel in Xiamen of China was a super shallow buried large span double-arch tunnel. Its construction was restricted by both underground excavation safe and adjacent pipeline protection. Multiple groups of working conditions were designed considering the relative position of pipe and tunnel, pipeline and tunnel construction parameters. Numerical simulation was used to study the influence of pipeline horizontal distance, buried depth, pipeline diameter, pipeline wall thickness, pipeline shape, pipeline material and excavation method on the response of adjacent underground pipelines. The results show that the relative position of pipe and tunnel, and the construction method of the double-arch tunnel have a great influence on pipeline deformation. Pipeline material, pipeline diameter and excavation method have a great influence on pipeline stress. The construction method was the key factor affecting the stress and deformation of the pipeline. The three-step reserved core soil method can effectively control the stress and deformation of underground pipelines. The research results can provide a reference for similar projects.


2021 ◽  
pp. 1-21
Author(s):  
Ramona Dogea ◽  
◽  
Xiu T Yan ◽  
Richard Millar ◽  
◽  
...  

Additive manufacturing has been adopted widely across various industries for producing parts mainly due to their ability to create complex geometries, eliminate material wastage and enable faster production rate, among others. Additive manufacturing has also increased design solution space by enabling exploration of mechatronic solutions for mechanical structures. This includes the integration of smart devices into wing structures to achieve a datadriven predictive maintenance-based system. For this, there is still the need to continuously explore various ways of integrating sensory capability into a mechanical structure during the manufacturing processes to ensure improvement and reliability of aircraft components. The scope of this paper was to analyse different wing rib geometries and the influence of embedding sensory capability via design for additive manufacturing process. In this work, three wing rib geometries with cut-outs and for sensory placement were designed and analysed to estimate their equivalent stress and deformation when such sensory locations are introduced. The results confirm the idea that it is feasible to introduce holding cavities for structural performance monitoring sensors without compromising the structural design requirements. The results also show that deformation and stress are highly dependent on the rib thickness and the insertion of sensory locations


Author(s):  
Mykola Prokopenko

The article provides an analytical review and analysis of stresses and deformations of parts moving at high speeds in a liquid or gas. The working conditions of materials and parts of turbines (blades, rotor and casing) operating at high temperatures and loads are analyzed. The main ways of solving the problem of ensuring the strength of such parts are presented. The main ways to solve the problem of reliability of parts or the product as a whole are given: mathematical modeling (calculated determination of strength, durability and reliability); physical modeling (model testing); testing of full-scale products in reproducible real or operational conditions.It is impossible to speak about the strength of a part only from the calculation of deformations and stresses, even taking into account their change over time, so it is necessary to have strength criteria that establish the relationship between the strength parameters. It is emphasized that in the general case, the criterion of strength should answer the question: will the part collapse or not with the known laws of change in time of stresses, strains and temperatures It is shown that the considered standard characteristics of creep and long-term strength can be directly used in calculations only for those parts in which the uniaxial stress state at constant stresses and temperature is realized, when the working conditions of the material fully meet the test conditions of materials.An analytical view of deformation diagrams is considered as the main means of carrying out practical calculations of material strength. It is shown that in order to determine the stresses and strains in parts that move at high speeds in a liquid or gas, it is necessary to take into account the model of parts exploitation, the processes of creep and thermal fatigue of the material, and the unsteadiness of load processes. Keywords: stresses and deformations of turbine parts; deformation diagram; operating model of turbine parts; creep and thermal fatigue; nonstationarity of loading processes  


2021 ◽  
Author(s):  
Xianyu Xiong ◽  
Jun Dai ◽  
Xinnian chen ◽  
Yibo Ouyang

Abstract The stressed environment of the inclined coal seam roadway is complex and changeable, and the damage degree of surrounding rock increases, threatening the safe mining of coal mines. To improve the effectiveness of stability control of surrounding rock of this kind of roadway, the deformation and failure law of the inclined coal seam roadway is analyzed based on the complex function theory. It optimizes the solution process and accuracy of the mapping function coefficient and deduces the analytical solution of surrounding rock stress and deformation inclined coal seam roadway. The deformation and failure mechanism of surrounding rock in inclined coal seam roadway is revealed theoretically and verified by numerical simulation and physical simulation test. The results show that the stress and deformation of roadway surrounding rock in inclined coal seam show obvious asymmetric distribution characteristics. The stress and deformation of roadway surrounding rock on the right side are greater than on the left side. The two sides of the roadway, the right side of the roof and the roof angle of the right side, are the key positions of roadway stress concentration and deformation. According to the variation law of stress and deformation distribution of roadway surrounding rock, roadway cyclic deformation and failure theory is put forward. The numerical simulation and physical simulation test show that the deformation and failure law of roadway is consistent with the theoretical analysis results, and the cyclic deformation and failure mechanism of roadway in inclined coal seam is verified.


Sign in / Sign up

Export Citation Format

Share Document