Evaluation of the Toxicity of Bisphenol A in Reproduction and Its Effect on Fertility and Embryonic Development in the Zebrafish (Danio rerio)

Bisphenol A (BPA) is a chemical substance commonly used in the manufacture of plastic products. Its inhalation or ingestion from particles in suspension, water, and/or polluted foods can trigger toxic effects related to endocrine disruption, resulting in hormonal, reproduction, and immunological alterations in humans and animals. The zebrafish (Danio rerio) is an ideal experimental model frequently used in toxicity studies. In order to assess the toxic effects of BPA on reproduction and embryonic development in one generation after parental exposure to it, a total of 80 zebrafish, males and females, divided into four groups in duplicate (n = 20) were exposed to BPA concentrations of 500, 50, and 5 µg L−1, along with a control group. The fish were kept in reproduction aquariums for 21 days. The embryos obtained in the crosses were incubated in a BPA-free medium and observed for signs of embryotoxicity. A histopathological study (under optical and electron microscopes) was performed of adult fish gonads. The embryos of reproducers exposed to BPA were those most frequently presenting signs of embryotoxicity, such as mortality and cardiac and musculoskeletal malformations. In the histopathological studies of adult individuals, alterations were found in ovocyte maturation and in spermatazoid formation in the groups exposed to the chemical. Those alterations were directly related to BPA action, affecting fertility in both sexes, as well as the viability of their offspring, proportionally to the BPA levels to which they were exposed, so that our results provide more information by associating toxic effects on the offspring and on the next generation.

Extraction and Isolation of Cellulose Nanofibers from Carpet Wastes Using Supercritical Carbon Dioxide Approach

Cellulose nanofibers (CNFs) are the most advanced bio-nanomaterial utilized in various applications due to their unique physical and structural properties, renewability, biodegradability, and biocompatibility. It has been isolated from diverse sources including plants as well as textile wastes using different isolation techniques, such as acid hydrolysis, high-intensity ultrasonication, and steam explosion process. Here, we planned to extract and isolate CNFs from carpet wastes using a supercritical carbon dioxide (Sc.CO2) treatment approach. The mechanism of defibrillation and defragmentation caused by Sc.CO2 treatment was also explained. The morphological analysis of bleached fibers showed that Sc.CO2 treatment induced several longitudinal fractions along with each fiber due to the supercritical condition of temperature and pressure. Such conditions removed th fiber’s impurities and produced more fragile fibers compared to untreated samples. The particle size analysis and Transmission Electron Microscopes (TEM) confirm the effect of Sc.CO2 treatment. The average fiber length and diameter of Sc.CO2 treated CNFs were 53.72 and 7.14 nm, respectively. In comparison, untreated samples had longer fiber length and diameter (302.87 and 97.93 nm). The Sc.CO2-treated CNFs also had significantly higher thermal stability by more than 27% and zeta potential value of −38.9± 5.1 mV, compared to untreated CNFs (−33.1 ± 3.0 mV). The vibrational band frequency and chemical composition analysis data confirm the presence of cellulose function groups without any contamination with lignin and hemicellulose. The Sc.CO2 treatment method is a green approach for enhancing the isolation yield of CNFs from carpet wastes and produce better quality nanocellulose for advanced applications.

Histological assessment, anti-quorum sensing, and anti-biofilm activities of Dioon spinulosum extract: in vitro and in vivo approach

Pseudomonas aeruginosa is an opportunistic bacterium causing several health problems and having many virulence factors like biofilm formation on different surfaces. There is a significant need to develop new antimicrobials due to the spreading resistance to the commonly used antibiotics, partly attributed to biofilm formation. Consequently, this study aimed to investigate the anti-biofilm and anti-quorum sensing activities of Dioon spinulosum, Dyer Ex Eichler extract (DSE), against Pseudomonas aeruginosa clinical isolates. DSE exhibited a reduction in the biofilm formation by P. aeruginosa isolates both in vitro and in vivo rat models. It also resulted in a decrease in cell surface hydrophobicity and exopolysaccharide quantity of P. aeruginosa isolates. Both bright field and scanning electron microscopes provided evidence for the inhibiting ability of DSE on biofilm formation. Moreover, it reduced violacein production by Chromobacterium violaceum (ATCC 12,472). It decreased the relative expression of 4 quorum sensing genes (lasI, lasR, rhlI, rhlR) and the biofilm gene (ndvB) using qRT-PCR. Furthermore, DSE presented a cytotoxic activity with IC50 of 4.36 ± 0.52 µg/ml against human skin fibroblast cell lines. For the first time, this study reports that DSE is a promising resource of anti-biofilm and anti-quorum sensing agents.

Antidiarrheal and Antibacterial Activities of Monterey Cypress Phytochemicals: In Vivo and In Vitro Approach

Monterey cypress (Cupressus macrocarpa) is a decorative plant; however, it possesses various pharmacological activities. Therefore, we explored the phytochemical profile of C. macrocarpa root methanol extract (CRME) for the first time. Moreover, we investigated its antidiarrheal (in vivo), antibacterial, and antibiofilm (in vitro) activities against Salmonella enterica clinical isolates. The LC-ESI-MS/MS analysis of CRME detected the presence of 39 compounds, besides isolation of 2,3,2″,3″-tetrahydro-4′-O-methyl amentoflavone, amentoflavone, and dihydrokaempferol-3-O-α-l-rhamnoside for the first time. Dihydrokaempferol-3-O-α-l-rhamnoside presented the highest antimicrobial activity and the range of values of MICs against S. enterica isolates was from 64 to 256 µg/mL. The antidiarrheal activity of CRME was investigated by induction of diarrhea using castor oil, and exhibited a significant reduction in diarrhea and defecation frequency at all doses, enteropooling (at 400 mg/kg), and gastrointestinal motility (at 200, 400 mg/kg) in mice. The antidiarrheal index of CRME increased in a dose-dependent manner. The effect of CRME on various membrane characters of S. enterica was studied after typing the isolates by ERIC-PCR. Its impact on efflux and its antibiofilm activity were inspected. The biofilm morphology was observed using light and scanning electron microscopes. The effect on efflux activity and biofilm formation was further elucidated using qRT-PCR. A significant increase in inner and outer membrane permeability and a significant decrease in integrity and depolarization (using flow cytometry) were detected with variable percentages. Furthermore, a significant reduction in efflux and biofilm formation was observed. Therefore, CRME could be a promising source for treatment of gastrointestinal tract diseases.

Advances in Forensic Sedimentology

Forensic sedimentology is a relatively recently realized field. Sedimentological methods used to solve cases have evolved as the field has developed, beginning with simple identification of minerals and progressing to the examination of individual grains using highly advanced scanning electron microscopes. More simple methods, such as color analysis, are still used today, but in addition, forensic sedimentologists look at surface textures and grain size distribution. For instance, quartz grains were used in a forensic technique as sediment fingerprint. The particle size distribution is one of the important tests when analysing sediments and soils in geological studies. For forensic work, the particle size distribution of sometimes very small samples requires precise determination using a rapid and reliable method with a high resolution. FRITSCH laser granulometer offers rapid and accurate sizing of particles in the range 0.04–2000 μm for a variety of sample types, including soils, unconsolidated sediments, dusts, powders, and other particulate materials.

Quantification of STEM Images in High Resolution SEM for Segmented and Pixelated Detectors

The segmented semiconductor detectors for transmitted electrons in ultrahigh resolution scanning electron microscopes allow observing samples in various imaging modes. Typically, two standard modes of objective lens, with and without a magnetic field, differ by their resolution. If the beam deceleration mode is selected, then an electrostatic field around the sample is added. The trajectories of transmitted electrons are influenced by the fields below the sample. The goal of this paper is a quantification of measured images and theoretical study of the capability of the detector to collect signal electrons by its individual segments. Comparison of measured and ray-traced simulated data were difficult in the past. This motivated us to present a new method that enables better comparison of the two datasets at the cost of additional measurements, so-called calibration curves. Furthermore, we also analyze the measurements acquired using 2D pixel array detector (PAD) that provide a more detailed angular profile. We demonstrate that the radial profiles of STEM and/or 2D-PAD data are sensitive to material composition. Moreover, scattering processes are affected by thickness of the sample as well. Hence, comparing the two experimental and simulation data can help to estimate composition or the thickness of the sample.

Fabrication of the Cu2ZnSnS4 Thin Film Solar Cell via a Photo-Sintering Technique

Alternative photo-sintering techniques for thermal annealing processes are used to improve the morphology, layer properties, and enhance solar cell performance. The fast, nontoxic, low cost, and environmentally friendly characteristics of Cu2ZnSnS4 have led to its consideration as an alternative potential absorber layer in copper indium gallium diselenide thin film solar cells. This work investigates the photo-sintering process for the absorber layer of Cu2ZnSnS4 solar cells. A Cu2ZnSnS4 layer was grown by hot-injection and screen-printing techniques, and the characteristics of the photo-sintered Cu2ZnSnS4 layer were evaluated by X-ray Diffraction, Raman spectroscopy, Energy dispersive X-ray analysis, Ultraviolet-visible spectroscopy, and field emission scanning electron microscopes. Overall, the optimal composition was Cu-poor and Zn-rich, without a secondary phase, estimated optical band-gap energy of approximately 1.6 eV, and enhanced morphology and kesterite crystallization. Using an intensity pulse light technique to the CZTS layer, fabrication of the solar cell device demonstrated successfully, and the efficiency of 1.01% was achieved at 2.96 J/cm2.

Indoor Nanoparticle Characterization in Construction Waste Recycling Companies over Time

Building activity is a significant source of atmospheric contamination by ultrafine dust. Cognizant of this fact, those active in the use and recycling of construction materials must be aware of the risks associated with exposure to nanoparticles (NPs) and ultra-fine particles (UFPs), as well as the associated health impacts. This work analyzed NPs and UFPs generated in a small building-material recycling company using high-resolution electron microscopes and X-ray Diffraction. A self-made passive sampler (LSPS) that can obtain particulate samples without physical and morphological changes, especially where there is a suspension of particulate material, was used in this study. A total of 96 particulate samples, using the LSPS for three months in four seasons, were collected during the study. Thus, the dry deposition of the particles, which are considered highly harmful to human health, was found in each of the four seasons of the year. It is suggested that for future research, the toxicological evaluations of the particulates in the construction industry should be investigated through the consideration of measures to control and mitigate the health risks of workers regarding exposure to NPs and UFPs.

Quantitative Assessment and Measurement of X-ray Detector Performance and Solid Angle in the Analytical Electron Microscope

A wide range of X-ray detectors and geometries are available today on transmission/scanning transmission analytical electron microscopes. While there have been numerous reports of their individual performance, no single experimentally reproducible metric has been proposed as a basis of comparison between the systems. In this paper, we detail modeling, experimental procedures, measurements, and specimens which can be used to provide a manufacturer-independent assessment of the performance of an analytical system. Using these protocols, the geometrical collection efficiency, system peaks, and minimum detection limits can be independently assessed and can be used to determine the best conditions to conduct modern hyperspectral and/or spectrally resolved tomographic analyses for an individual instrument. A simple analytical formula and specimen is presented which after suitable system calibrations can be used to experimentally determine the X-ray detector solid angle.

Study of Corrosion Resistance Properties of Heat Exchanger Metals in Two Different Geothermal Environments

Geothermal fluids harnessed for electricity production are generally corrosive because of their interaction with the underground. To ensure the longevity and sustainability of geothermal Organic Rankine Cycle (ORC) powerplants, the choice of heat exchanger material is essential. The performance of heat exchangers is affected by corrosion and scaling due to the geothermal fluids, causing regular cleaning, part replacement, and in the worst cases, extensive repair work. The properties of geothermal fluids vary between geothermal settings and even within geothermal sites. Differences in exposure conditions require different material selection considerations, where factors such as cost, and material efficiency are important to consider. This work studies in-situ geothermal exposure testing of four metals at two geothermal locations, in different geological settings. Four corrosion-resistant materials were exposed for one month at Reykjanes powerplant in Iceland and four months at Chaunoy oil field in France as material candidates for heat exchangers. The tested alloys were analysed for corrosion with macro- and microscopic techniques using optical and electron microscopes, which give an indication of the different frequencies of repairs and replacement. Inconel 625 showed no effects at Reykjanes and cracks at Chaunoy. The others (316L, 254SMO, and titanium grade 2) showed either corrosion or erosion traces at both sites.