Effect of Substituting Hf for Zr on Fe-Co-M-Nb-B (M = Zr, Hf) Amorphous Alloys with High Saturation Magnetization

The soft magnetic amorphous ribbons of (FexCo1−x)85M9Nb1B5 (M = Zr or Hf, x = 0.4, 0.5, 0.6, 0.7, 0.8, and 0.9) were investigated in this study. Replacing Zr by Hf turned out to increase saturation magnetization and, at the same time, reduce the coercivity, both of which serve together in enhancing the soft magnetic performance of the alloys. Moreover, the optimum ratio of Fe/Co was determined after the survey on different alloys with varying Fe/Co ratio resulting in the maximum saturation magnetization while keeping the coercivity low. After optimization, the highest saturation magnetization of 1.62 T was achieved with coercity of 11 A/m. While substitution of Hf for Zr slightly reduced the crystallization onset temperature of the amorphous structure, the thermal stability of the soft magnetic amorphous alloys was not significantly affected by the Zr/Hf replacement.

Enhanced magnetic performance in exchange coupled CoFe2O4 - LaFeO3 nanocomposites

Nanocomposite oxide system of (x)CoFe2O4 - (100-x)LaFeO3 with different weight percent of core-shell structured CoFe2O4 (x = 0,20,40,50,80,100) and LaFeO3 were fabricated, via a two-step sol-gel wet-chemical synthesis technique. The phase formation of the composites was confirmed by X-ray diffraction and the structural parameters of both the phases were attained from the Rietveld refinement results of XRD patterns. The elemental composition and microstructure of the resulting nanocomposites were examined by using energy-dispersive X-ray spectroscopy (EDX) and high-resolution transmission electron microscopy (HRTEM) technique, respectively. The detailed magnetometry studies at 300 K and 5 K reveal that the inter-and intra-phase magnetic interactions affect the saturation magnetization (MS), remanence magnetization (MR) and coercivity (HC) values of this bi-magnetic system. The remarkable feature of “pinched magnetic hysteresis loop” was evidenced in the [(50) CoFe2O4 - (50)LaFeO3] composite, leading to a lesser magnetic loss factor and better magnetic performance of this sample. The report depicts an improved interfacial exchange coupling at 5 K, for the nanocomposites of core-shell morphology and offers an understanding or explanation of improved magnetic performance for the (50)CoFe2O4 - (50)LaFeO3 nanocomposite and opens up an important way to design new multiferroic applications in low magnetic fields.