cyclic temperature
Recently Published Documents


TOTAL DOCUMENTS

206
(FIVE YEARS 41)

H-INDEX

20
(FIVE YEARS 2)

Electronics ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 62
Author(s):  
Luchun Yan ◽  
Jiawen Yao ◽  
Yu Dai ◽  
Shanshan Zhang ◽  
Wangmin Bai ◽  
...  

Solder joints in electronic packages are frequently exposed to thermal cycling in both real-life applications and accelerated thermal cycling tests. Cyclic temperature leads the solder joints to be subjected to cyclic mechanical loading and often accelerates the cracking failure of the solder joints. The cause of stress generated in thermal cycling is usually attributed to the coefficients of thermal expansion (CTE) mismatch of the assembly materials. In a die-attach structure consisting of multiple layers of materials, the effect of their CTE mismatch on the thermal stress at a critical location can be very complex. In this study, we investigated the influence of different materials in a die-attach structure on the stress at the chip–solder interface with the finite element method. The die-attach structure included a SiC chip, a SAC solder layer and a DBC substrate. Three models covering different modeling scopes (i.e., model I, chip–solder layer; model II, chip–solder layer and copper layer; and model III, chip–solder layer and DBC substrate) were developed. The 25–150 °C cyclic temperature loading was applied to the die-attach structure, and the change of stress at the chip–solder interface was calculated. The results of model I showed that the chip–solder CTE mismatch, as the only stress source, led to a periodic and monotonic stress change in the temperature cycling. Compared to the stress curve of model I, an extra stress recovery peak appeared in both model II and model III during the ramp-up of temperature. It was demonstrated that the CTE mismatch between the solder and copper layer (or DBC substrate) not only affected the maximum stress at the chip–solder interface, but also caused the stress recovery peak. Thus, the combined effect of assembly materials in the die-attach structure should be considered when exploring the joint thermal stresses.


2021 ◽  
Vol 12 ◽  
Author(s):  
Natalia Soledad Paulucci ◽  
Adriana Belén Cesari ◽  
María Alicia Biasutti ◽  
Marta Susana Dardanelli ◽  
María Angélica Perillo

Here, we estimate fast changes in the fluidity of Sinorhizobium meliloti membranes submitted to cyclic temperature changes (10°C–40°C–10°C) by monitoring the fluorescence polarization (P) of DPH and TMA-DPH of the whole cell (WC) as well as in its outer (OM) and inner (IM) membranes. Additionally, the long-term response to thermal changes is demonstrated through the dynamics of the phospholipid and fatty acid composition in each membrane. This allowed membrane homeoviscous adaptation by the return to optimal fluidity levels as measured by the PDPH/TMA-DPH in WC, OM, IM, and multilamellar vesicles of lipids extracted from OM and IM. Due to probe-partitioning preferences and membranes’ compositional characteristics, DPH and TMA-DPH exhibit different behaviors in IM and OM. The rapid effect of cyclic temperature changes on the P was the opposite in both membranes with the IM being the one that exhibited the thermal behavior expected for lipid bilayers. Interestingly, only after the incubation at 40°C, cells were unable to recover the membrane preheating P levels when cooled up to 10°C. Solely in this condition, the formation of threads and nodular structures in Medicago sativa infected with S. meliloti were delayed, indicating that the symbiotic interaction was partially altered but not halted.


2021 ◽  
Vol 2056 (1) ◽  
pp. 012032
Author(s):  
M O Makeev ◽  
A S Osipkov ◽  
V I Batshev ◽  
P A Mikhalev ◽  
B A Parshin ◽  
...  

Abstract Optical elements used in outer space must be designed considering the effects of such factors as space vacuum, atomic oxygen in low Earth orbit, solar and space radiation, large temperature drops, gas release of spacecraft materials and structural elements, space dust and debris. In order to harden and protect mirror surfaces of optical elements from external factors, it has been promisingly applied diamond-like carbon coatings on their surface. These coatings are characterized by high strength and wear-resistant properties, in particular, high hardness, low friction coefficient, high wear resistance and chemical inertness. This leads to their widespread use in various fields of science and technology, including optical instrumentation. This paper presents the results of testing an aluminum mirror with a diamondlike carbon coating under the effect of cyclic temperature changes for determining their ability to withstand a rapid cyclic ambient temperature change, and specifically, to maintain optical and mechanical properties.


Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4811
Author(s):  
Romualdas Kliukas ◽  
Arūnas Jaras ◽  
Ona Lukoševičienė

The article is focused on spun concrete made with different chemical admixtures under long-term exposure to aggressive salt-saturated ground water and a cyclic temperature gradient. Over a long-term experimental investigation, 64 prismatic spun concrete specimens were subjected to multicycle (75–120) processing under combined aggressive ambient conditions. Prismatic specimens were soaked in water or saline and dried at a temperature of 45–50 °C. The long-term multi-cycle effect of the temperature gradient and physical salt attack on the compressive strength, Young’s modulus and durability of concrete was found to be negative. Chemical admixtures, though, improved the structure of spun concrete, thus having a significant positive effect on its physical-mechanical properties and durability.


MRS Advances ◽  
2021 ◽  
Author(s):  
Yan Nie ◽  
Weiwei Wang ◽  
Xun Xu ◽  
Nan Ma ◽  
Andreas Lendlein

AbstractHuman induced pluripotent stem cells (hiPSCs) are highly sensitive to extrinsic physical and biochemical signals from their extracellular microenvironments. In this study, we analyzed the effect of cyclic temperature changes on hiPSCs behaviors, especially by means of scanning force microscopy (BIO-AFM). The alternation in cellular mechanics, as well as the secretion and pattern of deposition of extracellular matrix (ECM) protein in hiPSCs were evaluated. The arrangement of the actin cytoskeleton changed with the variation of the temperature. The rearranged cytoskeleton architecture led to the subsequent changes in cell mechanics (Young's modulus of hiPSCs). With the exposure to the cyclic cold stimuli, an increase in the average surface roughness (Ra) and roughness mean square (RMS) was detected. This observation might be at least in part due to the upregulated secretion of Laminin α5 during repeated temporary cooling. The expression of pluripotent markers, NANOG and SOX2, was not impaired in hiPSCs, when exposed to the cyclic cold stimuli for 24 h. Our findings provide an insight into the effect of temperature on the hiPSC behaviors, which may contribute to a better understanding of the application of locally controlled therapeutic hypothermia. Graphic abstract The cyclic temperature changes, from 37 to 10 °C, rapidly increased the mechanical strength of human-induced pluripotent stem cells (hiPSCs), which could be explained by the re-arrangement of cytoskeletons. The capacity of hiPSCs to remodel the extracellular matrix was also altered by the repeated temporary cooling, as they exhibit an enhanced ability to physically remodulate and secrete the ECM components.


Author(s):  
Brunella Casagrande Brunelli Santos ◽  
Fernando Saboya ◽  
John S. McCartney ◽  
Sérgio Tibana

BMC Zoology ◽  
2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Jian Ge ◽  
Yangen Zhou ◽  
Ming Huang ◽  
Qinfeng Gao ◽  
Yunwei Dong ◽  
...  

Abstract Background Rainbow trout is an economically important fish in aquaculture and is a model species in environmental physiology. Despite earlier research on the seawater adaptability of rainbow trout at different temperature regimes, the influence on the liver and intestine in this species is still unknown. Two trials were conducted to investigate the effects of constant and diel cyclic temperatures on phospholipid fatty acid (PLFA) composition in the liver and intestine of rainbow trout during seawater acclimation. Results At the end of growth trial 1, fish at 9 and 12.5 °C showed significantly higher ratios of unsaturated to saturated (U/S) and unsaturation index (UI) than those at 16 °C in liver and intestine phospholipids. After day 1 of seawater acclimation, the U/S, UI, and average chain length (ACL) of liver and intestinal phospholipids in fish at 16 °C significantly increased. Two weeks after seawater acclimation, the liver and intestinal PLFA composition adapted to salinity changes. In trial 2, significantly higher U/S, UI, and ACL were found in intestinal phospholipids at 13 ± 2 °C. On the first day after seawater acclimation, UI and ACL in liver phospholipids significantly increased at 13 °C, while fish at 13 ± 2 °C showed significantly decreased U/S, UI, and ACL in the intestine. At the end of growth trial 2, liver PLFA compositions were stable, whereas intestinal PLFA at 13 and 13 ± 1 °C showed significantly decreased U/S, UI, and ACL. A two-way analysis of variance and principal component analysis revealed significant effects of different constant temperatures, seawater acclimation, and their interaction on the liver and intestinal phospholipids, a significant effect of diel cyclic temperature on intestinal phospholipids, and the effects of seawater acclimation and its interaction with diel cyclic temperature on liver phospholipids. Conclusion Temperatures of 9 and 12.5 °C could elevate membrane fluidity and thickness in the liver and intestine of rainbow trout in freshwater, whereas no significant effects were found with diel temperature variations. After seawater acclimation, constant and diel cyclic temperatures significantly influenced the membrane fluidity and thickness of the liver and intestine. Compared with constant temperature, diel temperature variation (13 ± 2 °C) can enhance the adaptability of rainbow trout during seawater acclimation.


Author(s):  
Rajith Sudilan Dayarathne ◽  
Bipul C. Hawlader ◽  
Ryan Phillips

Frost heave and thaw settlement are two critical factors that need to be considered in the design of chilled gas pipelines in cold regions. Due to the variation in seasonal temperature and operating conditions (e.g., pressure and temperature at the compressor stations), the pipeline temperature in some segments might vary from subzero to above-zero during winter and summer. This study examines the freezing and thawing for cyclic and constant temperatures at the pipeline and ground surfaces based on the response of fourteen model pipes tested in a geotechnical centrifuge. The cyclic (temperature) operation reduces the frost heave rate per year and causes net settlement in some cases. When the thaw bulb resulting from an above-zero operating temperature is less than the previously developed frost bulb, upward water flow occurs through the thawed soil, which could alter the pipeline–soil interaction behaviour. Five types of freeze-thaw-induced vertical displacement of the pipe have been identified from the centrifuge test results.


Sign in / Sign up

Export Citation Format

Share Document