Inter-Specific Variation in the Potential for Upland Rush Management Advocated by Agri-Environment Schemes to Increase Breeding Wader Densities

Encroachment of rush Juncus spp. in the United Kingdom uplands poses a threat to declining wader populations due to taller, denser swards that can limit foraging and breeding habitat quality for some species. Rush management via cutting, implemented through agri-environment schemes (AESs), could thus increase wader abundance, but there is insufficient assessment and understanding of how rush management influences upland waders. Across two upland regions of England [South West Peak (SWP) and Geltsdale nature reserve, Cumbria], we surveyed waders over four visits in fields where rush was managed according to AES prescriptions (treatment; n = 21) and fields without rush management that were otherwise ecologically similar (control; n = 22) to assess how the densities of breeding wader pairs respond to rush management in the short-term. We find evidence for regional variation in the response of waders to rush management, with densities of Common Snipe Gallinago gallinago significantly higher in treatment than control fields in the SWP, but not Geltsdale. There were no statistically significant responses to treatment on densities of Eurasian Curlew Numenius arquata or Northern Lapwing Vanellus vanellus. The 95% confidence intervals for the treatment parameter estimates suggest that this may be due to limited statistical power in the case of Lapwing. For Curlew, however, any potential increases in densities are negligible. There was no evidence that variation in rush cover, which ranged from 10 to 70%, influenced densities of any of our three focal species. Our results suggest that rush management through AES prescriptions delivered in isolation of other interventions may not lead to general increases in breeding wader densities in the short-term, but benefits may arise in some situations due to regional and inter-specific variation in effectiveness. Rush management supported with interventions that improve soil conditions and thus food availability, or reduce predation pressure, may enable AES rush management to generate benefits. Additional research is required to maximise the potential benefits of rush management for each species through the development of prescriptions that tailor to individual species’ optimum sward structure.

Personalized Immunotherapy Treatment Strategies for a Dynamical System of Chronic Myelogenous Leukemia

This paper is devoted to exploring personalized applications of cellular immunotherapy as a control strategy for the treatment of chronic myelogenous leukemia described by a dynamical system of three first-order ordinary differential equations. The latter was achieved by applying both the Localization of Compact Invariant Sets and Lyapunov’s stability theory. Combination of these two approaches allows us to establish sufficient conditions on the immunotherapy treatment parameter to ensure the complete eradication of the leukemia cancer cells. These conditions are given in terms of the system parameters and by performing several in silico experimentations, we formulated a protocol for the therapy application that completely eradicates the leukemia cancer cells population for different initial tumour concentrations. The formulated protocol does not dangerously increase the effector T cells population. Further, complete eradication is considered when solutions go below a finite critical value below which cancer cells cannot longer persist; i.e., one cancer cell. Numerical simulations are consistent with our analytical results.

Fatigue Improvement of AlSi10Mg Fabricated by Laser-Based Powder Bed Fusion through Heat Treatment

This study aimed to identify an optimal heat-treatment parameter set for an additively manufactured AlSi10Mg alloy in terms of increasing the hardness and eliminating the anisotropic microstructural characteristics of the alloy in as-built condition. Furthermore, the influence of these optimized parameters on the fatigue properties of the alloy was investigated. In this respect, microstructural characteristics of an AlSi10Mg alloy manufactured by laser-based powder bed fusion in non-heat-treated and heat-treated conditions were investigated. Their static and dynamic mechanical properties were evaluated, and fatigue behavior was explained by a detailed examination of fracture surfaces. The majority of the microstructure in the non-heat-treated condition was composed of columnar grains oriented parallel to the build direction. Further analysis revealed a high fraction of pro-eutectic α-Al. Through heat treatment, the alloy was successfully brought to its peak-hardened condition, while eliminating the anisotropic microstructural features. Yield strength and ductility increased simultaneously after heat treatment, which is due to the relief of residual stresses, preservation of refined grains, and introduction of precipitation strengthening. The fatigue strength, calculated at 107 cycles, improved as well after heat treatment, and finally, detailed fractography revealed that a more ductile fracture mechanism occurred in the heat-treated condition compared to the non-heat-treated condition.

Can clubfoot scoring systems predict the number of casts and future recurrences in patients undergoing Ponseti method?

Background Congenital clubfoot is one of the common congenital orthopaedic deformities. Pirani and Dimeglio scoring systems are two classification systems for measuring the severity of the clubfoot. However, the relation between the initial amount of each of these scores and the treatment parameters is controversial. Methods Patients with severe and very severe idiopathic clubfoot undergoing Ponseti treatment were entered. Their initial Pirani and Dimeglio scores, the number of castings as a short-term treatment parameter, and the recurrences as a long-term parameter until the age of three were prospectively documented. Results One hundred patients (143 feet) with mean age of 9.51 ± 2.3 days including 68 males and 32 females and the mean initial Pirani score of 5.5 ± 0.5 and the mean initial Dimeglio score of 17.1 ± 1.6 were studied. The incidence of relapse was 8.4 %( n = 12). The mean initial Pirani score (P < 0.001) and the mean initial Dimeglio score (P < 0.003) of the feet with recurrence were significantly more than the non-recurrence feet. The mean number of casts in the recurrence group (7 ± 0.9) was significantly more than the feet without recurrences (6.01 ± 1.04) (P = 0.002). The ROC curve suggested the Pirani score of 5.75 and the Dimeglio score of 17.5 as the cut-off points of these scores for recurrence prediction. Conclusion In our study, Pirani and Dimeglio scores are markedly related with more number of casts and recurrence in patients with severe and very severe clubfoot. Also, we have introduced new cut-off points for both classification systems for prediction of recurrence. To the best of our knowledge, this finding has not been introduced into the English literature.

Fatigue Improvement of AlSi10Mg Fabricated by Laser-Based Powder Bed Fusion through Heat-Treatment.

This study aims to identify an optimal heat-treatment parameter set for an additively manufactured AlSi10Mg alloy in terms of increasing the hardness and eliminating the anisotropic microstructural characteristics of the alloy in as-built condition. Furthermore, the influence of these optimized parameters on the fatigue properties of the alloy investigated. In this respect, microstructural characteristics of an AlSi10Mg alloy manufactured by Laser-Based Powder Bed Fusion in non-heat-treated and heat-treated conditions were investigated. Their static and dynamic mechanical properties were evaluated, and fatigue behavior was explained by a detailed examination of fracture surfaces. Much of the microstructure in the non-heat-treated condition was composed of columnar grains oriented parallel to the build direction. Further analysis revealed a high fraction of pro-eutectic &alpha;-Al. Through heat-treatment, the alloy was successfully brought to its peak-hardened condition, while eliminating the anisotropic microstructural features. Yield strength and ductility increased simultaneously after heat-treatment, which is due to the relief of residual stresses, preservation of refined grains, and introduction of precipitation strengthening. The fatigue strength, calculated at 10^7 cycles, improved as well after heat-treatment and finally detailed fractography reviled that a more ductile fracture mechanism has happened in the heat-treated condition compared to the non-heat-treated condition.

Microstructure Evolution and Mechanical Property Response of 3D-Printed Scalmalloy with Different Heat-Treatment Times at 325 °C

According to the material nature, aluminum alloys are widely applied in aerospace, construction, and automotive applications due to their characteristics of being lightweight, having good formability, and having good corrosion resistance. To further improve the degree of the lightweight quality, introducing a new material with high specific strength and a structure with a lightweight design would be efficient. Scalmalloy (Al-4.49Mg-0.71Sc-0.51Mn-0.27Zr-0.07Fe-0.03Si alloy), which exhibits high specific strength and is made by a 3D printing process with less design limitation, has huge application potential. In this study, the selective laser melting (SLM) process was introduced for sample preparation. Through XRD, EBSD, and TEM, the microstructure of the heat-treated samples at 325 °C with different heat-treatment times was analyzed to evaluate the optimized heat-treatment parameter for 3D printed Scalmalloy. The relationship between the mechanical properties and the variation of precipitation size and volume fraction is discussed in detail in this study.

EVALUATION OF WATER HYACINTH (EICHORNIA CRASSIPES) AS FEED INGREDIENT AND YOLK COLOURING AGENT IN LAYERS DIETS.

Sixty-four Black Harco breed of laying hens, 39 weeks in lay were fed water hyacinth Eichhorria crassipes at dietary levels of 0, 5, 10, and 15% for 56 days. The experiment had eight birds in each of the 2 replicates per treatment with the E. crassipes levels of inclusion as treatment. Parameter study include body weight change, feed intake, egg weight, egg yolk coloration, egg shell thickness and feed conversion ratio (feed/kg egg). The mean feed intake significantly decreased (P<0.05) among the mean values of 126.98, 127.27, 127.27 and 122.59 g/day for 0, 5, 10 and 15% inclusion levels respectively. the egg shell thickness increased significantly (P<0.05) among the mean values obtained i.e from 0.51-0.67 mm. however, egg weight changes, egg yolk coloration and feed conversion ration did not show any significant difference (P>0.05) among the respective means. E. crassipes appears to be optimally utilized at 5% dietary level in layers ration and could be used as pigmenter for egg yolk coloration at this level.