damage rate
Recently Published Documents


TOTAL DOCUMENTS

292
(FIVE YEARS 93)

H-INDEX

22
(FIVE YEARS 1)

2021 ◽  
Vol 23 (6) ◽  
pp. 2619-2629
Author(s):  
Su Hoon Choi ◽  
Jeong Hwa Yang ◽  
Sang-Hyun Lee ◽  
Min Soo Kim
Keyword(s):  

2021 ◽  
pp. 485-494
Author(s):  
Hongguang Yang ◽  
Huanxiong Xie ◽  
Hai Wei ◽  
Jianchun Yan ◽  
Huichang Wu ◽  
...  

Aiming at the problem that contain more soil impurities of potato post-harvest, which affects subsequent deep processing, an apparatus for removing soil impurities from potato was developed. The whole structure is mainly composed of frame, feeding port, flexible rubber finger conveying mechanism, slender filament rotary brushing mechanism, discharging port and the like. The research and analysis determined that the main parameters influencing the soil impurities removal performance were the movement speed of conveying mechanism, the movement speed of brushing mechanism and the clearance between conveying mechanism and brushing mechanism (hereinafter referred to as the mechanism clearance). Taking the main influencing parameters as test factors, and the soil impurities removal rate and potato damage rate as indexes, the orthogonal test with three factors and three levels was carried out. The optimal parameter combination was obtained as follows: the movement speed of conveying mechanism was 0.35m/s, the movement speed of brushing mechanism was 0.40m/s, and the mechanism clearance was 55mm. At this time, the average soil impurities removal rate was 87.18%, and the potato average damage rate was 1.95%, which met the requirements of potato cleaning operation.


Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 196
Author(s):  
Paweł J. Romanowicz ◽  
Dariusz Smolarski ◽  
Marek S. Kozień

A new approach based on the direct spectral method for fatigue analysis of elements subjected to bimodal stress histories, including high compression effects, is proposed. A correction factor, taking into account the influence of the mean compressive stresses, is used in the proposed method. Equivalent amplitude is estimated, based on criteria proposed by Smith, Watson, and Tooper, and by Bergmann and Seeger. The method is presented with example of a thrust roller bearing. Two cases in which the rollers were subjected to constant force 206 N (where constant amplitude stresses occurred in the rollers) and cyclic force (where bimodal stresses with variable amplitudes occurred in the rollers) are studied. It is observed that multiaxial fatigue criteria (Crossland, Papadopoulos) do not include the influence of bimodal stresses and should not be used for such loading conditions. The proposed method includes both kinds of stress waveforms in the fatigue analysis and can be applied for the accurate identification of stress components and the determination of fatigue life. The damage rate calculated by the proposed approach for rollers subjected to a cyclic force (equivalent load equal to 151 N) was 0.86, which is in good agreement with the recommendations provided in the literature. The obtained accuracy of the proposed method is above 95%.


2021 ◽  
Vol 51 (4) ◽  
pp. 38-42
Author(s):  
M. G. Gazazyan ◽  
O. S. Khutsishvili ◽  
T. S. Lvanova ◽  
I. S. Lunova

Goal of the research: optimization of the diagnosis of chronic endometritis. Methodology: perspective research. Institution: Department of obstetrics and gynecology of the Kursk medical University. Material of the research: 67 patients suffering benign diseases of endometrium and myometrium connected with it. 59 patients with the diseases of the uterus of the same пaтe without chronic endometritis. Methods of the research: clinico-laboratory, ultrasonography, hysteroscopic, histologic, cytologic, microbiologic examination of the endometrium, PSR, radioimmunological method to determine progesterone rate in the blood plasma. Results of the research: the endoscopice variants of chronic endometritis are extreted: hyperplastic and hypoplastic (and also its forms - focal and diffusive). They are necessary stages achieving reliable diagnosis of the inflammatory process of endometrium a differential method of probing of endometrium depending on a variant and damage rate of chronic endometritis is worked out. Conclusion: the complex method of the diagnosis chronic endometritis including hysteroscopy with visual biopsy and cytologic-histologic examination of endometrium increases the quality of diagnosis by 64,4% in comparison with the traditional curettement of the endometrium and considerably decreases the number of posttraumatic and inflammatory complications.


2021 ◽  
Vol 23 (2) ◽  
pp. 84-91
Author(s):  
Oktaviana Limbong ◽  
Budi Adi Kristanto ◽  
Florentina Kusmiyati

[EFFECT OF CONCENTRATION AND TIME INTERVAL OF BABANDOTAN BIOPESTICIDE SPRAYING ON THE INTENSITY OF DAMAGE AND YIELD OF KAILAN]. Biopesticides from Ageratum conyzoides plants are used as an alternative in pest control. The used of synthetic pesticides was widespread as an effort in pest and disease control because it worked effectively and quickly, but caused resistance and resurgence of pests were bad impact on the environment for long term. The content of active compounds in Ageratum conyzoides plants such as flavonoids, anthraquinone, tannins, terpenes, phenols, saponins, alkaloids and steroids worked as controllers of various cultivated plant pests. This study aims to determine the spraying concentration and interval of spraying Ageratum conyzoides on the intensity of damage and yield of kailan plants. This research was conducted in November 2020 - January 2021 at Agroecotechnopark research land, Diponegoro University, Semarang. The experimental design used was a factorial Randomized Complete Block Design with 3 replications. The first factor was spraying concentration (10%, 30% and 50%) and the second factor was interval of spraying (once every 5 days, 10 days and 15 days). The variables observed were absolute damage rate, relative damage rate, plant height, number of leaves and fresh weight of kailan. Data were analyzed by Analysis of Variance followed by DMRT (Duncan's Multiple Range Test). The results showed that Ageratum conyzoides biopesticide was able to control pests and and to support kailan growth. Spraying babandotan biopesticide at a concentration of 50% has been able to reduce the rate of crop damage by pests, supported vegetative growth, and increased kailan growth to provide optimal yield. Spraying time interval did not affect all variables.  


2021 ◽  
Vol 11 (24) ◽  
pp. 12158
Author(s):  
Zhilong Zhang ◽  
Aijun Geng

Reducing ear damage is the key to improving the quality of maize harvests. In order to reduce the impact and damage of the ear caused by the ear snapping mechanism, this paper proposes a method to convert ear deformation energy during collision into elastic potential energy in the ear snapping mechanism. According to the above method, a low-damage maize snapping mechanism was designed. In order to verify the feasibility of energy conversion in reducing damage, the dynamic model of the contact between the ear and the snapping plate was established, and a dynamic simulation analysis was carried out based on the finite element method (FEM). In order to obtain better parameters for the improved mechanism, a test rig was established, after which a performance test was carried out on the test rig. The results showed that the primary and secondary order that affected the ear damage rate was the rotational speed of the snapping roller, the spring stiffness and the forward speed. The data processing software Design Expert was used to optimize the parameters, it was concluded that when the rotational speed was 805 r·min−1, the forward speed was 1.29 m·s−1, the spring stiffness was 33.5 N·mm−1, the model predicted that the ear damage rate was 0.023%. Therefore, this paper could provide further reference for research into maize low-damage ear snapping technology.


2021 ◽  
Vol 9 ◽  
Author(s):  
Meng Cai ◽  
Jiaqi Liu ◽  
Ying Cui

Network robustness is the ability of a network to maintain a certain level of structural integrity and its original functions after being attacked, and it is the key to whether the damaged network can continue to operate normally. We define two types of robustness evaluation indicators based on network maximum flow: flow capacity robustness, which assesses the ability of the network to resist attack, and flow recovery robustness, which assesses the ability to rebuild the network after an attack on the network. To verify the effectiveness of the robustness indicators proposed in this study, we simulate four typical networks and analyze their robustness, and the results show that a high-density random network is stronger than a low-density network in terms of connectivity and resilience; the growth rate parameter of scale-free network does not have a significant impact on robustness changes in most cases; the greater the average degree of a regular network, the greater the robustness; the robustness of small-world network increases with the increase in the average degree. In addition, there is a critical damage rate (when the node damage rate is less than this critical value, the damaged nodes and edges can almost be completely recovered) when examining flow recovery robustness, and the critical damage rate is around 20%. Flow capacity robustness and flow recovery robustness enrich the network structure indicator system and more comprehensively describe the structural stability of real networks.


Author(s):  
Harshavardan J. Hilli ◽  
Rahul Kapoor ◽  
Amandeep .

Background: Oat is mostly neglected crop for hybrid development due to its floral structure which results in high damage rate during hybridisation. Due to the cumbersome in acquiring a sufficient number of hybrids and subsequent backcrosses are difficult that lead to lack of much inheritance studies in Oats. Methods: The procedure for crossing used was almost identical to that used by oat breeders which was conducted for 2 years viz., 2019-20 and 2020-21 at Forage Station, Punjab Agriculrural University, Ludhiana. Result: The experiment was conducted to know the seed set percent in oat cultivars. Since the oat flower is fragile compared other cereals and it is easily harmed during the emasculation and pollination process. The seed set percent observed was only 12 and 10 percent in the year 2019-20 and 2020-21, respectively.


2021 ◽  
Vol 2136 (1) ◽  
pp. 012047
Author(s):  
Tao Zhu ◽  
JinHua Xiang

Abstract At present, the artificial fruit picking cost is high, the fruit damage rate is high, and the efficiency is low, so the greenhouse picking robot emerges as the times’ demand. Therefore, this paper designs a kind of a chassis system of greenhouse picking robots. This paper mainly designed and simulates the chassis mechanical system, electrical system, and basic motion control algorithm from three aspects. Finally, the prototype of the chassis system of the picking robot in the greenhouse is completed and the chassis system is debugged, which proves that it has the characteristics of adaptability to the greenhouse environment, strong universality, and strong expansibility.


Sign in / Sign up

Export Citation Format

Share Document