Hot-Band-Absorption-Induced Anti-Stokes Fluorescence of Aggregation-Induced Emission Dots and the Influence on the Nonlinear Optical Effect

Hot-band absorption (HBA)-induced anti-Stokes fluorescence (ASF) with longer-wavelength excitation is one effective pathway to deep penetration and low autofluorescence in intravital fluorescence imaging, raising demands for fluorophores with broad spectra, high absorption, and strong emission. However, typical fluorescent dyes display some emission quenching when their concentration is increased in order to obtain brighter fluorescence. In this work, the HBA-induced ASF of aggregation-induced emission (AIE) dots is reported. BPN-BBTD dots were synthesized and confirmed with a fluorescence enhancement and a considerable ASF intensity. In addition, the mechanism of ASF and the HBA process of BPN-BBTD dots were carefully validated and discussed. To obtain the full advantages of the long-wavelength excitation and the short fluorescence lifetime in deep-tissue bioimaging, a large-depth ASF confocal microscopic imaging of in vivo cerebral vasculature was conducted under the excitation of a 980 nm continuous wave laser after intravenous injection of BPN-BBTD dots. Meanwhile, the 3D structure of the cerebrovascular network was successfully reconstructed.

Hot-band absorption of indocyanine green for advanced anti-stokes fluorescence bioimaging

Bright anti-Stokes fluorescence (ASF) in the first near-infrared spectral region (NIR-I, 800 nm–900 nm) under the excitation of a 915 nm continuous wave (CW) laser, is observed in Indocyanine Green (ICG), a dye approved by the Food and Drug Administration for clinical use. The dependence of fluorescence intensity on excitation light power and temperature, together with fluorescence lifetime measurement, establish this ASF to be originated from absorption from a thermally excited vibrational level (hot-band absorption), as shown in our experiments, which is stronger than the upconversion fluorescence from widely-used rare-earth ion doped nanoparticles. To test the utility of this ASF NIR-I probe for advanced bioimaging, we successively apply it for biothermal sensing, cerebral blood vessel tomography and blood stream velocimetry. Moreover, in combination with L1057 nanoparticles, which absorb the ASF of ICG and emit beyond 1100 nm, these two probes generate multi-mode images in two fluorescent channels under the excitation of a single 915 nm CW laser. One channel is used to monitor two overlapping organs, urinary system & blood vessel of a live mouse, while the other shows urinary system only. Using in intraoperative real-time monitoring, such multi-mode imaging method can be beneficial for visual guiding in anatomy of the urinary system to avoid any accidental injury to the surrounding blood vessels during surgery.

Effect of Hot Band on Texture Evolution and Plastic Anisotropy in Aluminium Alloys

This contribution presents the evolution of crystallographic texture during thermomechanical processing of Al alloys. It is shown that the nature of crystallographic changes involved in deformation and recrystallization is strongly affected by the variety of initial (pre-rolling) state of a given metallic system. Four hot rolled Al strips of identical chemical composition and different textures were subjected to further thermomechanical processing with equal technological characteristics. Although the pre-rolling textures were first destroyed by the deformation, while annealing accounted for further qualitative and quantitative crystallographic changes in the investigated polycrystalline systems, it seems that there is still a great influence of the hot band texture on the texture dependent properties. Various qualitative and quantitative texture characteristics of annealed sheets ensured diverse Lanford value curves, which is a direct consequence of the crystallographic features developed in the hot bands. The Cube-dominated hot band ensured a strong V-shaped profile after cold rolling and subsequent recrystallization, whereas it was shown that a weak pre-rolling texture is more advantageous in terms of both normal and planar anisotropy.

On the through-process texture evolution assessment in grain oriented Fe-3 wt% Si steel produced by a novel directional inoculation technique

A novel directional inoculation technique has been designed to cast thin slab ingots containing Goss (or near Goss) oriented components in the as cast microstructure under the combined effect of oriented nucleation and oriented growth. The same has been targeted so as to retain Goss orientations and simultaneously develop γ fiber components (ranging from {111}<$$1\overline{1}0$$ 1 1 ¯ 0 > to {111}<112>) during hot rolling. The designed scheme of directional inoculation achieved oriented nucleation by the effect of exogenously added soft magnetic inoculants under magnetic field and oriented growth by the effect of fast cooling rates prevailing in the mould. The choice of 65Fe–35Co (wt%) system as soft magnetic inoculants was made taking into account the similarity in crystal structure and lattice parameter. The chemically synthesized inoculants under the effect of external magnetic field during solidification were able to exhibit directional inoculation. Variation in the cast microstructure and microtexture by varying the extent of inoculant addition was studied by EBSD technique. The ingots cast under different conditions were subjected to a designed hot rolling schedule and the through process microstructural and microtextural evolution was assessed. It was observed that fine equiaxed grains with initial cube orientations in the as cast structure could lead to the most desirable microstructural as well as microtextural gradient in the hot band.

Novel low-powered upconversion strategy to enhance anti-Stokes shift：Cascading the one-photon hot-band absorption and triplet sensitization based on Pd(II)octaethylporphyrin

Typical triplet sensitizer Pd(II)octaethylporphyrin (PdOEP) was firstly found to possess the absorption of hot vibrational energy-level and resulting the one-photon absorption (OPA) upconversion emission. Cascading hot-band OPA and triplet-triplet annihilation...