Incoming control parameters for PVC sheets used for the production of plastic cards

One of the main requirements for obtaining high-quality raw materials for production is a clear formulation of the necessary parameters that the manufacturer of materials must comply with in the production of raw materials. The very observance of these parameters in the future will reduce the number of production of unsuitable products and plastic cards with defects. Parameter control is carried out for each separate batch of materials. The sample during inspection should be at least 0.1 % of the total amount of material, the deviation from the parameters should be included in the tolerance. The tasks of the stage of product quality control should ensure the implementation of the quality policy, as well as the general economic policy of the enterprise. Control is an integral part of the activities of any enterprise, a regulator of factors that form quality at all stages of the production process and ensure the release of quality products. Based on the analysis and experimental studies, the main parameters that need to be monitored were determined: geometric dimensions, color, thickness, density, surface tension, tensile strength, uniformity of paint application, shrinkage during sheet sintering

Hydrogeomorphology as a Tool in the Evolutionary Analysis of the Dynamic Landscape—Application to Larrodrigo, Salamanca, Spain

Evolutionary analysis of the fluvial landscape provides relevant inputs for the environmental management of a territory, in such a way that the understanding of the dynamics of fluvial spaces becomes a preponderant factor in the definition of protection and management strategies. Although the development of geographic information systems is a step forward in the study of the landscape, it is necessary to establish methodological frameworks that make remote sensing techniques available at multiple spatio-temporal scales, especially in basins with high levels of intervention. In the present study, we develop a methodology for the analysis of the fluvial landscape development in the last century of a highly modified water body, through the detailed study of hydrogeomorphic elements, using remote sensing techniques including high-density surface data (LiDAR) and historical aerial imageries; when supported by fieldwork, these allow for the identification of the sequence of sedimentation–erosion zones, differentiating in detail the zones denominated as areas of current erosion, accretion zones, and historical erosion zones. An application of the methodology was carried out in the Larrodrigo stream, located in Salamanca, Spain.

Covalent Immobilization of Antibodies through Tetrazine-TCO Reaction to Improve Sensitivity of ELISA Technique

Enzyme-linked immunosorbent assay (ELISA) is routinely used to detect biomolecules related to several diseases facilitating diagnosis and monitoring of these, as well as the possibility of decreasing their mortality rate. Several methods have been carried out to improve the ELISA sensitivity through antibodies immobilization on the microtiter plates. Here, we have developed a strategy of antibodies immobilization to improve the ELISA sensitivity increasing the antibody density surface through the tetrazine (Tz)-trans-cyclooctene (TCO) reaction. For this, we prepared surfaces with tetrazine groups while the captured antibody was conjugated with TCO. The tetrazine surfaces were prepared in two different ways: (1) from aminated plates and (2) from Tz-BSA-coated plates. The surfaces were evaluated using two sandwich ELISA models, one of them using the low-affinity antibody anti-c-myc as a capture antibody to detect the c-myc-GST-IL8h recombinant protein, and the other one to detect the carcinoembryonic human protein (CEA). The sensitivity increased in both surfaces treated with tetrazine in comparison with the standard unmodified surface. The c-myc-GST-IL8h detection was around 10-fold more sensible on both tetrazine surfaces, while CEA ELISA detection increased 12-fold on surfaces coated with Tz-BSA. In conclusion, we show that it is possible to improve the ELISA sensitivity using this immobilization system, where capture antibodies bond covalently to surfaces.

On Wiener Polarity Index and Wiener Index of Certain Triangular Networks

A topological index of graph G is a numerical quantity which describes its topology. If it is applied to the molecular structure of chemical compounds, it reflects the theoretical properties of the chemical compounds. A number of topological indices have been introduced so far by different researchers. The Wiener index is one of the oldest molecular topological indices defined by Wiener. The Wiener index number reflects the index boiling points of alkane molecules. Quantitative structure activity relationships (QSAR) showed that they also describe other quantities including the parameters of its critical point, density, surface tension, viscosity of its liquid phase, and the van der Waals surface area of the molecule. The Wiener polarity index has been introduced by Wiener and known to be related to the cluster coefficient of networks. In this paper, the Wiener polarity index W p G and Wiener index W G of certain triangular networks are computed by using graph-theoretic analysis, combinatorial computing, and vertex-dividing technology.

Effect of Viscosity on Bouncing Dynamics of Elliptical Footprint Drops on Non-Wettable Ridged Surfaces

An initial drop shape can alter the bouncing dynamics and significantly decrease the residence time on superhydrophobic surfaces. Elliptical footprint drops show asymmetric dynamics owing to a pronounced flow driven by the initial drop shape. However, the fundamental understanding of the effect of viscosity on the asymmetric dynamics has yet to be investigated, although viscous liquid drop impact on textured surfaces is of scientific and industrial importance. Here, the current study focuses on the impact of elliptical footprint drops with various liquid properties (density, surface tension, and viscosity), drop sizes, and impact velocities to study the bouncing dynamics and residence time on non-wettable ridged surfaces numerically by using a volume-of-fluid method. The underlying mechanism behind the variation in residence time is interpreted by analyzing the shape evolution, and the results are discussed in terms of the spreading, retraction, and bouncing. This study provides an insight on possible outcomes of viscous drops impinging on non-wettable surfaces and will help to design the desired spraying devices and macro-textured surfaces under different impact conditions, such as icephobic surfaces for freezing rain or viscous liquids.

High Density Surface Electromyography Activity of the Lumbar Erector Spinae Muscles and Comfort/Discomfort Assessment in Piano Players: Comparison of Two Chairs

Introduction: At a professional level, pianists have a high prevalence of playing-related musculoskeletal disorders. This exploratory crossover study was carried out to assess and compare quantitatively [using high density surface electromyography (HDsEMG)], and qualitatively (using musculoskeletal questionnaires) the activity of the lumbar erector spinae muscles (ESM) and the comfort/discomfort in 16 pianists sitting on a standard piano stool (SS) and on an alternative chair (A-chair) with lumbar support and a trunk-thigh angle between 105° and 135°.Materials and Methods: The subjects played for 55 min and HDsEMG was recorded for 20 s every 5 min. For the quantitative assessment of the muscle activity, the spatial mean of the root mean square (RMSROA) and the centroid of the region of activity (ROA) of the ESM were compared between the two chairs. For the qualitative assessment, musculoskeletal questionnaire-based scales were used: General Comfort Rating (GCR); Helander and Zhang’s comfort (HZc) and discomfort (HZd); and Body Part Discomfort (BPD).Results: When using the A-chair, 14 out of 16 pianists (87.5%) showed a significantly lower RMSROA on the left and right side (p < 0.05). The mixed effects model revealed that both chairs (F = 28.21, p < 0.001) and sides (F = 204.01, p < 0.001) contributed to the mean RMSROA variation by subject (Z = 2.64, p = 0.004). GCR comfort indicated that participants found the A-Chair to be “quite comfortable,” and the SS to be “uncomfortable.” GCR discomfort indicated that the SS caused more numbness than the A-Chair (p = 0.05) and indicated the A-Chair to cause more feeling of cramps (p = 0.034). No difference was found on HZc (p = 0.091) or HZd (p = 0.31) between chairs. Female participants (n = 9) reported greater comfort when using the A-Chair than the SS (F = 7.09, p = 0.01) with respect to males. No differences between chairs were indicated by the BPD assessment.Conclusion: It is concluded that using a chair with lumbar support, such as the A-chair, will provide greater comfort, less exertion of the ESM and less discomfort than the standard piano stool.