nanoparticles volume fraction
Recently Published Documents


TOTAL DOCUMENTS

61
(FIVE YEARS 30)

H-INDEX

9
(FIVE YEARS 4)

Nanomaterials ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 129
Author(s):  
Sameh E. Ahmed ◽  
Aissa Abderrahmane ◽  
Sorour Alotaibi ◽  
Obai Younis ◽  
Radwan A. Almasri ◽  
...  

Using phase change materials (PCMs) in energy storage systems provides various advantages such as energy storage at a nearly constant temperature and higher energy density. In this study, we aimed to conduct a numerical simulation for augmenting a PCM’s melting performance within multiple tubes, including branched fins. The suspension contained Al2O3/n-octadecane paraffin, and four cases were considered based on a number of heated fins. A numerical algorithm based on the finite element method (FEM) was applied to solve the dimensionless governing system. The average liquid fraction was computed over the considered flow area. The key parameters are the time parameter (100 ≤t≤600 s) and the nanoparticles’ volume fraction (0%≤φ≤8%). The major outcomes revealed that the flow structures, the irreversibility of the system, and the melting process can be controlled by increasing/decreasing number of the heated fins. Additionally, case four, in which eight heated fins were considered, produced the largest average liquid fraction values.


2021 ◽  
Vol 1167 ◽  
pp. 87-100
Author(s):  
Amira Trodi ◽  
Mohamed El Hocine Benhamza

The present numerical work, based on the finite volume method, deals with the characterization of natural convective flow and thermal fields inside differentially vertical heated square cavities filled with a nanofluid as well as the quantification of the convective exchanges. The investigation is devoted to study the influence of the hybrid nanofluid (Al2O3-Cu / water) on the flow’s general structure with a particular attention to the Nusselt number. An exhaustive parametric study is conducted considering different combinations of Al2O3 and Cu nanoparticles (NPs) dispersed in water for a range of Rayleigh numbers (Ra) and total volume fractions An appropriate agreement with experimental data was observed for the estimation of the hybrid nanofluid thermal conductivity. From the results, it is observed that the heat transfer intensifies by increasing the Ra number and the nanoparticles volume fraction. The hybrid nanofluid seems to be the most efficient nanofluid in comparison with a base fluid and a single nanofluid. This heat transfer enhancement becomes more convincing with the increase of the Cu NPs content (% in volume).


Author(s):  
M. S. Alqarni ◽  
Hassan Waqas ◽  
Sumeira Yasmin ◽  
Taseer Muhammad

The prime aim of this investigation is to discuss the two-dimensional steady analysis of hybrid nanoliquids in the existence of magnetohydrodynamics (MHD), thermally radiation and viscous dissipation effects over a linear stretchable sheet. Carbon nanotubes (SWCNT and MWCNT) with copper (Cu) are comprised in the propylene glycol-based fluid. The significance of propylene glycol-based fluid is affected under the exponential space-based heat source phenomenon. The remarkable role of propylene glycol on thermal transport of hybrid nanoliquids is influenced in the presence of temperature-dependent viscosity. The highly nonlinear governing partial differential structures are reduced to nonlinear ODEs by using suitable transformations. The transformed nonlinear ODEs of flow problem have been solved numerically by employing bvp4c (shooting) scheme with Lobatto-IIIA formula in MATLAB. The physical outcomes of involved parameters are obtained by utilizing the graphical and tabular data. The heat transport rate and the skin friction under the numerical data are also presented. From the results, we concluded that the velocity of fluid is declined for higher nanoparticles volume fraction. Velocity of fluid is declined with growing magnetic parameter. Furthermore, the temperature is upgraded with the growing thermal Biot number.


Author(s):  
Umar Farooq ◽  
Hassan Waqas ◽  
Taseer Muhammad ◽  
Shan Ali Khan

Abstract The nanofluid is most advantageous to enhance the heat efficiency of base fluid by submerging solid nanoparticles in it. The metals, oxides, and carbides are helpful to improve the heat transfer rate. In the present analysis, the role of the slip phenomenon in the radiative flow of hybrid nanoliquid containing SiO2 silicon dioxide and CNTs over in the porous cone is scrutinized. The behavior of the magnetic field, thermal conductivity, and thermal radiation are examined. Here the base fluid ethylene glycol water (C2H6O2−H2O) is used. Accepting similarity transformation converts the controlling partial differential equations (PDEs) into ordinary differential equations (ODEs). The numerical solution is obtained by utilizing the Lobatto-IIIa method. The significant physical flow parameters are discussed by utilizing tables and graphs. Final remarks are demonstrating the velocity profile is declined via higher magnetic parameter while boosted up for nanoparticles volume fraction. Furthermore, the thermal profile is enriching via thermal conductivity parameter, radiation parameter, and nanoparticles volume fraction.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wahib Owhaib ◽  
Mahanthesh Basavarajappa ◽  
Wael Al-Kouz

AbstractIn this article, the three-dimensional (3D) flow and heat transport of viscous dissipating Cu-H2O nanoliquid over an elongated plate in a rotating frame of reference is studied by considering the modified Buongiorno model. The mechanisms of haphazard motion and thermo-migration of nanoparticles along with effective nanoliquid properties are comprised in the modified Buongiorno model (MBM). The Rosseland radiative heat flux and prescribed heat flux at the boundary are accounted. The governing nonlinear problem subjected to Prandtl’s boundary layer approximation is solved numerically. The consequence of dimensionless parameters on the velocities, temperature, and nanoparticles volume fraction profiles is analyzed via graphical representations. The temperature of the base liquid is improved significantly owing to the existence of copper nanoparticles in it. The phenomenon of rotation improves the structure of the thermal boundary layer, while, the momentum layer thickness gets reduced. The thermal layer structure gets enhanced due to the Brownian movement and thermo-migration of nanoparticles. Moreover, it is shown that temperature enhances owing to the presence of thermal radiation. In addition, it is revealed that the haphazard motion of nanoparticles decays the nanoparticle volume fraction layer thickness. Also, the skin friction coefficients found to have a similar trend for larger values of rotation parameter. Furthermore, the results of the single-phase nanoliquid model are limiting the case of this study.


CFD letters ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1-19
Author(s):  
Yuan Ying Teh ◽  
Adnan Ashgar

A three-dimensional hybrid nanofluid flow over a stretching/shrinking sheet is numerically studied. The hybrid nanofluid being considered in this study used water as the base fluid and mixed with two types of solid nanoparticles, namely alumina (Al2O3) and copper (Cu). The main focus of the current study is to examine the effect of magnetic field, Joule heating, and rotating sheet on the velocity, and temperature profiles. In addition, the impact of suction and stretching sheet on the variations of reduced skin friction, , and reduced heat transfer are studied as well. The fluid flow and heat transfer problem presented in this study is governed by a system of nonlinear partial differential equations (PDEs), which is then transformed into the corresponding system of high order nonlinear ordinary differential equations (ODEs) using similarity variables. The resulting system of higher order nonlinear ODEs is solved numerically using a boundary value solver known as bvp4c, which operates on the MATLAB computational platform. Results revealed that dual solutions exist for shrinking sheet while unique solutions are observed for stretching sheet with various values of Cu nanoparticles volume fraction and magnetic parameter. Dual solutions also exist for the value of the suction parameter greater than its critical point with various values of Cu nanoparticles volume fraction. Velocity profile of the hybrid nanofluid increases alongside with the value of magnetic parameter but declination was observed in the profile of and temperature, for both solutions as the value of Cu nanoparticles volume fraction increases. When the value of rotational parameter increases, both velocity and profiles increase for both solutions. This indicates that the momentum boundary layer thickness increases with increasing values of for both solutions, but thermal boundary layer thickness decreases for the first solution and increases for the second solution. Finally, an increment in the value of Eckert number causes the temperature of the hybrid nanofluid to rise as well for both first and second solutions.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Qiu-Hong Shi ◽  
Bilal Ahmed ◽  
Sohail Ahmad ◽  
Sami Ullah Khan ◽  
Kiran Sultan ◽  
...  

AbstractThis paper presents the analysis of transfer of heat and mass characteristics in boundary layer flow of incompressible magnetohydrodynamic Maxwell nanofluid with thermal radiation effects confined by exponentially shrinking geometry. The effects of Brownian motion and thermophoresis are incorporated using Buongiorno model. The partial differential equations of the governing model are converted in non-dimensional track which are numerically inspected with proper appliances of Runge–Kutta fourth order scheme.The significant effects of heat and mass fluxes on the temperature and nanoparticles volume fractions are investigated. By the increases in Lewis number between $$1.0$$ 1.0 to $$2.0$$ 2.0 , the decrease in nanoparticle volume fraction and temperature is noted. With the change in the Prandtl constant that varies between $$0.7$$ 0.7 to $$1.5$$ 1.5 , the nanoparticles volume fraction and temperature are dwindled. Nanoparticles volume fraction and temperature distribution increase is noted with applications of radiation constant. With consequent variation of thermophoresis parameter between $$0.1$$ 0.1 to $$0.8$$ 0.8 , nanoparticles volume fraction and temperature distribution increases. It is also noted that the increase in thermophoresis parameter and Brownian parameter from $$0.1$$ 0.1 to $$0.8$$ 0.8 , nanoparticles volume fraction decreases while temperature distribution increases.


Author(s):  
Silpi HAZARIKA ◽  
Sahin AHMED ◽  
Ali J. CHAMKHA

An analytical investigation is performed on the unsteady hydromagnetic flow of nanoparticles Al2O3 and TiO2 in the EG base fluid through a saturated porous medium bounded by two vertical surfaces with heat generation and no-slip boundary conditions. The physics of initial and boundary conditions is designated with the flow model's non-linear partial differential equations. The analytical expressions of nanofluid velocity and temperature with the channel are derived, and Matlab Codes are used to plot the significant results for physical variables. From the physical point of view for nanofluid velocity and temperature results, the base fluid C2H6O2 has a higher viscosity and thermal conductivity than that of water. Physically, the platelet shape Al2O3 nanofluid has the highest velocity than TiO2 nanofluid. It is found that the velocity of nanofluid enhanced the porosity and nanoparticles volume fraction for Al2O3 - EG and TiO2 - EG base nanofluids. However, this trend is reversed for the effects of heat generation. Obtained results indicate that an increase in nanoparticles volume fraction raises the skin friction near the surface, but profiles gradually become linear, due to less frictional effects of nanoparticles. Moreover, due to higher values of nanoparticles volume fraction, the thermal conductivity is raised, and thus the thickness of the thermal boundary layer is declined. The results show that the method provides excellent approximations to the analytical solution of nonlinear system with high accuracy. Metal oxide nanoparticles have wide applications in various fields due to their small sizes, such as the pharmaceutical industry and biomedical engineering. HIGHLIGHTS Impact of platelet shape Al2O3 and TiO2 for base fluid C2H6O2 is studied In Couette and Poiseuille flow, nanoparticles play a vital role to enhance the heat transfer The infinite series solution has been used for solving the non-linear PDE’s The uses of Al2O3 and TiO2 in significant heat transfer applications is overviewed The physiochemical and structural features of metal oxide nanoparticles have diverse biomedical applications GRAPHICAL ABSTRACT


2021 ◽  
Vol 8 (7) ◽  
pp. 23-30
Author(s):  
Rajab Al-Sayagh ◽  

This paper deals with the study of free convection in a 3D enclosure filled with Al2O3-nanofluid and equipped with a U-shaped obstacle. The used U-shaped obstacle is considered perfectly conductive. The effect of the dimension and the orientation of the obstacle is investigated. In addition, the parameters governing the problem are varied as Rayleigh number (103 to 106), and nanoparticles volume fraction (0 to 7.5%). Results are depicted in terms of flow structures, temperature fields, and Nusselt number. Results show that the obstacle dimension and orientation can control the flow and optimize the heat transfer and the addition of nanoparticles enhances significantly Nusselt number.


2021 ◽  
Vol 68 ◽  
pp. 52-69
Author(s):  
Ahmed S. Rashed ◽  
Ehsan H. Nasr ◽  
Magda M. Kassem

The effect of a magnetic source of variable strength has been studied on ferro-nanofluid incorporating nanoparticles of Cobalt ferrite (CoFe2O4) with water as a base fluid. Group method has been used to remodel the governing system to a system of ordinary differential equations. The recent study was motivated by inspecting the effect of four parameters including nanoparticles volume fraction, , Prandtl number, , magnetic field strength of the source,, and temperature difference ratio with respect to ambient temperature, . The results showed that the nanofluid velocity and shear stress increased as long as and increase. On the other hand, both are inversely related to the increment in Pr and Temperature distribution inside the boundary layer was noticed to increase due to the increment in Pr values and decrease due to the increment ratios. Contrarily, the heat flux throughout the boundary layer decreased and increased due to increasing respectively. Key words: Ferro-hydrodynamic; Nanofluids; Group Method


Sign in / Sign up

Export Citation Format

Share Document