Intensity-Modulated Polymer Optical Fiber-Based Refractive Index Sensor: A Review

The simple and highly sensitive measurement of the refractive index (RI) of liquids is critical for designing the optical instruments and important in biochemical sensing applications. Intensity modulation-based polymer optical fiber (POF) RI sensors have a lot of advantages including low cost, easy fabrication and operation, good flexibility, and working in the visible wavelength. In this review, recent developments of the intensity modulation POF-based RI sensors are summarized. The materials of the POF and the working principle of intensity modulation are introduced briefly. Moreover, the RI sensing performance of POF sensors with different structures including tapered, bent, and side-polished structures, among others, are presented in detail. Finally, the sensing performance for different structures of POF-based RI sensors are compared and discussed.

Identification and glass biodeterioration of Chaetomium globosum TTHF1-3 isolated from optical instrument at Thai Hoa, Nghe An province

The colonization and growth of harmful fungi on the glass surface have caused irreversible damage to optical quality. Harmful grades observed on the optical instruments depend on the biological characteristics of fungi that vary from species to species. The present study focused on isolation, identification, and evaluation of glass biodeterioration properties such as organic acid and exopolysaccharide production of fungal strain Chaetomium globosum TTHF1-3 isolated from lens of optical instrument collected at Thai Hoa, Nghe An province. Under microscopic observation, the fungal strain TTHF1-3 cells showed brown or dark brown color perithecia and ascospores. Based on ITS sequence analyses, the strain TTHF1-3 was found to share 100% sequence identity with that of C. globosum species deposited on GenBank (NCBI). A in situ biodeterioration test exhibited the hyphal surface coverage of strain TTHF1-3 reaching 29.77±1.15%, which corresponded to harmful grade 2 based on the ISO 9022-11:2015 criteria. When incubated on MT4 medium containing glucose and mineral elements, the pH values of C. globosum TTHF1-3 culture were significantly decreased from 6.5 to 3.12±0.12, which was in contrast to MT1 medium. In addition, fungal strain TTHF1-3 was able to produce 8.2±0.3 g/L exopolysaccharides. The findings in the present study confirmed that C. globosum TTHF1-3 was harmful fungus responsible for glass biodeterioration.

Related Works and Basic Considerations

The characterization and measurement of surface profiles is one of the most basic metrology tasks in industrial manufacturing. What started with mechanical stylus profilometers has developed with ultrasonic transducers towards optical instruments. These are capable of appropriate resolutions to enable nanometrology, [14].

Fast wide-field upconversion luminescence lifetime thermometry enabled by single-shot compressed ultrahigh-speed imaging

Photoluminescence lifetime imaging of upconverting nanoparticles is increasingly featured in recent progress in optical thermometry. Despite remarkable advances in photoluminescent temperature indicators, existing optical instruments lack the ability of wide-field photoluminescence lifetime imaging in real time, thus falling short in dynamic temperature mapping. Here, we report video-rate upconversion temperature sensing in wide field using single-shot photoluminescence lifetime imaging thermometry (SPLIT). Developed from a compressed-sensing ultrahigh-speed imaging paradigm, SPLIT first records wide-field luminescence intensity decay compressively in two views in a single exposure. Then, an algorithm, built upon the plug-and-play alternating direction method of multipliers, is used to reconstruct the video, from which the extracted lifetime distribution is converted to a temperature map. Using the core/shell NaGdF4:Er3+,Yb3+/NaGdF4 upconverting nanoparticles as the lifetime-based temperature indicators, we apply SPLIT in longitudinal wide-field temperature monitoring beneath a thin scattering medium. SPLIT also enables video-rate temperature mapping of a moving biological sample at single-cell resolution.

A parameterization of Long-Continuing-Current (LCC) lightning in the lightning submodel LNOX (version 3.0) of the Modular Earth Submodel System (MESSy, version 2.54)

Lightning flashes can produce a discharge in which a continuing electrical current flows for more than 40 ms. This type of flashes are proposed to be the main precursors of lightning-ignited wildfires and also to trigger sprite discharges in the mesosphere. However, lightning parameterizations implemented in global atmospheric models do not include information about the continuing electrical current of flashes. The continuing current of lightning flashes cannot be detected by conventional lightning location systems. Instead, these so-called Long-Continuing-Current (LCC) flashes are commonly observed by Extreme Low Frequency (ELF) sensors and by optical instruments located in space. Previous reports of LCC lightning flashes tend to occur in winter and oceanic thunderstorms, which suggests a connection between weak convection and the occurrence of this type of discharge. In this study, we develop a parameterization of LCC lightning flashes based on a climatology derived from optical lightning measurements reported by the Lightning Imaging Sensor (LIS) on-board the International Space Station (ISS) between March 2017 and March 2020. We use meteorological data from reanalyses to find a global parameterization that uses the vertical velocity at 450 hPa pressure level as a proxy for the ratio of LCC to typical lightning in thunderstorms. We implement this parameterization into the LNOX submodel of the Modular Earth Submodel System (MESSy) for usage within the EMAC model, and compare the observed and the simulated climatologies of LCC lightning flashes using six different lightning parameterizations. We find that the best agreement between the simulated and the observed spatial distribution is obtained when using a novel combined lightning parameterization based on the cloud top height over land and on the convective precipitation over ocean.

Visualization of hydrodynamic and physico-chemical processes in rotating and vibrating containers

Variable inertial fields are an efficient way to control the behaviour of hydrodynamic systems. Forces of inertia can be used, for example, to stabilize or destabilize systems with an interface or density gradient, to mix multiphase or non-isothermal fluids. The implementation of this approach means that liquids fill the periodically moving containers. In this paper, the situations are considered when the containers perform either rotation or translational vibrations. Methods for measuring the density and velocity fields of convective flows in reacting hydrodynamic systems are described. Interferometry is used to visualize the density distribution. Particle image velocimetry (PIV) is used to study the structure and velocity of the flows. Optical instruments are installed stationary in the laboratory system. For video recording, a camera shutter is synchronized with the motion of a container, and thus the images are captured in a fixed phase of oscillations or rotation. Constructions of the containers make it possible to illuminate the working volume through transparent walls at different angles or in different planes. They also provide a compensation for the centrifugal pressure and allow interference cells to be used in overload conditions. The successful application of the methods in experimental studies of chemo-hydrodynamic processes is demonstrated.

Magnetic position sensors

Magnetic position sensors are popular in industrial and automotive applications since they are robust, resistant to dust and oil and they can be cheap. However, precise magnetic position sensors can achieve 0.015 % accuracy and 10 nm resolution. The maximum achievable range is about 20 m. DC magnetic position sensors are using a permanent magnet as a field source. As a field sensor, magnetoresistors are often used instead of traditional Hall sensors. Eddy current sensors work also with non-magnetic conduction targets. Magnetostrictive sensors are based on the time-of-flight of the elastic wave excited in the magnetostrictive material. The sensors can be several meters long and their applications range from level meters to hydraulics. Magnetic trackers and long-range position sensors utilize AC field sources, which are detectable from distances up to 20 m. Compared to optical instruments magnetic trackers do not need direct view. Their applications include surgery, mixed reality, and underground and underwater navigation.

Efektifitas Pembelajaran Berbasis Inquiry Melalui Implementasi Modeling Instruction pada Materi Alat Optik

This study aims to analyze inquiry-based learning through the implementation of modeling instruction on optical instrument materials. This research method used quantitative descriptive research. The subjects of this study were students of class XI IPA SMAN 2 Donggo. The collection technique includes observation, literature review, questionnaire, test and documentation. The data obtained will be analyzed descriptively quantitatively, among the research data to be analyzed are: student activities, learning outcomes, and student responses to ongoing learning. The results of this study include: 1) Student activity obtained a score of 74.58% or good category, 2) Inquiry learning with Modeling Instruction on optical instrument material can actually improve students' understanding with an N-gain score of 1.3 points or very high category. high, 3) Student responses to learning obtained a score of 84.37% or very interesting category. Based on the results of the study, it was found that through Inquiry learning with Modeling Instruction on Optical Instruments material, it can be used as an alternative to improve the quality of learning in class, especially in Physics subjects.