lowest unoccupied molecular orbital
Recently Published Documents


TOTAL DOCUMENTS

219
(FIVE YEARS 79)

H-INDEX

18
(FIVE YEARS 3)

2021 ◽  
Vol 9 (3) ◽  
pp. 077-085
Author(s):  
Merve Şenğül ALPATER ◽  
Zaid H. AL-SAWAFF ◽  
Fatma KANDEMİRLİ

In this paper, the possible interactions between cisplatin Cl2H6N2Pt as an anticancer drug and gallium nitride (Ga12N12) nanocage have been investigated using the DFT/b3lyp/lanl2dz(d,p) level of theory. Three different orientations were used to mimic the cisplatin adsorbed on Ga12N12. To investigate the interaction mechanism between the two components, the adsorption energies and thermodynamic parameters, the electronic properties such as the energies and orbitals distribution of the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), the HOMO-LUMO energy gaps (Eg), thermodynamic properties were also investigated. Additionally, some quantum molecular descriptors were calculated to understand molecular reactivity. The main results revealed that the adsorption process of the drug compound on the surface of the nanocage varies with the adsorption site. The process showed that different energies could be obtained, where the highest energy value was when the drug compound was adsorbed with the nanocage at the chlorine atom, with a value of (41.85) kcal/mol. On the other hand, the distance between the drug compound atoms was affected before and after adsorption, which proves the existence of an interaction between the drug compound and the nanocage and considers it as a drug delivery vehicle.


Author(s):  
C. W. Chidiebere ◽  
C. E. Duru ◽  
J. P. C. Mbagwu

Molecular orbitals are vital to giving reasons several chemical reactions occur. Although, Fukui and coworkers were able to propose a postulate which shows that highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) is incredibly important in predicting chemical reactions. It should be kept in mind that this postulate could be a rigorous one therefore it requires an awfully serious attention in order to be understood. However, there has been an excellent breakthrough since the introduction of computational chemistry which is mostly used when a mathematical method is fully well built that it is automated for effectuation and intrinsically can predict chemical reactivity. At the cause of this review, we’ve reported on how HOMO and LUMO molecular orbitals may be employed in predicting a chemical change by the utilization of an automatic data processing (ADP) system through the utilization of quantum physics approximations.


Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7983
Author(s):  
Mehmet Yilmaz ◽  
Yasar Demir ◽  
Sakir Aydogan ◽  
Maria Luisa Grilli

In this study, the performance of an organic dye obtained from the bark of the red pine (Pinus brutia) tree growing in Muğla/Turkey as an interface layer in the Au/n-Si Schottky diode (SD) structure was evaluated. For this purpose, at first, the optimized molecular structure, the highest occupied molecular orbital (HOMO), and the lowest unoccupied molecular orbital (LUMO) simulations of the organic dye were calculated by the Gauss program and it was theoretically proven that the dye exhibits semiconducting properties. Then, the electrical and photodiode variables such as ideality factor, effective barrier height, series resistance, interface states density distribution, photosensitivity, and photo responsivity were evaluated employing current-voltage measurements under dark and different illumination densities. Additionally, C-V measurements were used to demonstrate that the fabricated device has capacitive features and this capability varies as a function of the frequency. Under these measurements, the possible conduction mechanism for the organic dye-based Au/n-Si device was investigated and the results showed that Au/Pinus brutia/n-Si may be a good candidate for optoelectronic applications.


Author(s):  
Yu Jie Zheng ◽  
Qi Zhang ◽  
Omololu Odunmbaku ◽  
Zeping Ou ◽  
Meng Li ◽  
...  

Abstract Utilizing first-principles calculations, charge transfer doping process of single layer tin selenide (SL-SnSe) via the surface adsorption of various organic molecules was investigated. Effective p-type SnSe, with carrier concentration exceeding 3.59×1013 cm-2, was obtained upon adsorption of tetracyanoquinodimethane (TCNQ) or 2,3,5,6-tetrafluoro-7,7,8,8-tetracyano-quinodimethane (F4TCNQ) on SL-SnSe due to their lowest unoccupied molecular orbital (LUMO) acting as shallow acceptor states. While we could not obtain effective n-type SnSe through adsorption of tetrathiafulvalene (TTF) or 1,4,5,8-tetrathianaphthalene (TTN) on pristine SnSe due to their highest occupied molecular orbitals (HOMO) being far from the conduction band edge of SnSe, this disadvantageous situation can be amended by the introduction of an external electric field perpendicular to the monolayer surface. It is found that Snvac will facilitate charge transfer from TTF to SnSe through introducing an unoccupied gap state just above the HOMO of TTF, thereby partially compensating for the p-type doping effect of Snvac. Our results show that both effective p-type and n-type SnSe can be obtained and tuned by charge transfer doping, which is necessary to promote its applications in nanoelectronics, thermoelectrics and optoelectronics.


2021 ◽  
Vol 2063 (1) ◽  
pp. 012002
Author(s):  
Dalal H Alsawad ◽  
Ali A Al-Riyahee ◽  
Ali J Hameed

Abstract A series of 4-(para-substituted phenyl)-1,2,3-selenadiazole adducts of [VO(acac)2] were studied by density functional theory (DFT) calculations. The 4-(para-substituted phenyl)-1,2,3-selenadiazole molecules have been selected to be bound with vanadium atom in [VO(acac)2] through Se, N2 and N3. The resulting adducts have been investigated in two geometries (cis and trans) in order to show the effect of such structural change on the electronic properties of the studied adducts. The optimized geometries, (binding and reorganization) energies and the spatial distribution of the highest molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the adducts are presented and discussed.


2021 ◽  
Vol 11 (4) ◽  
pp. 4007-4015

Inhibition efficiency of thiosemicarbazide derivative, namely 4-ethyl-1-(4-oxo-4-phenylbutanoyl)thiosemicarbazide (EOPT) on corrosion of mild steel, was investigated utilizing the density functional theory (DFT) modeling techniques in the aqueous phase. Chemical parameters at the quantum level, such as energies of highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO), dipole moment (µ), absolute electronegativity (χ), global hardness (η), softness (σ), and the fraction of electrons transferred (∆N) have been determined at the B3LYP level of theory with 6-31G (d, p) basis set.


Crystals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1292
Author(s):  
Huai-Wen Tsai ◽  
Kan-Lin Hsueh ◽  
Mei-Hsin Chen ◽  
Che-Wun Hong

The electronic and optical properties of polythiophene (PT) for polymer light-emitting diodes (PLEDs) were calculated using density functional theory (DFT) and time-dependent DFT. We calculated the electronic and optical properties of thiophene and PT polymers with degrees of polymerization (DP) from 2 to 30 monomers (T1–T30) and their derivatives. The associated highest occupied molecular orbital (HOMO) energy, lowest unoccupied molecular orbital (LUMO) energy, band gaps, electron orbitals, and molecular structures were determined. As the DP increased, the LUMO energy gradually decreased, and the HOMO energy gradually increased. The band gap of PT approached 2 eV as the DP of the PT polymer increased from 1 to 30. The calculations and exchange–correlation functional were verified against values in the literature and experimental data from cyclic voltammetry (redox potential) and ultraviolet-visible, photoluminescence, and ultraviolet photoelectron spectra. The color of PT PLEDs can be adjusted by controlling the DP of the polymer and the substituents.


Author(s):  
Ehouman Ahissan Donatien ◽  
Bamba Kafoumba ◽  
Kogbi Guy Roland ◽  
Bamba Amara ◽  
Kouakou Adjoumani Rodrigue ◽  
...  

Atenolol was examined as a copper corrosion inhibitor in 1M nitric acid solution using the mass loss technique and quantum chemical studies, based on density functional theory (DFT) at the B3LYP level with the base 6-311G (d,p). The inhibitory efficiency of the molecule increases with increasing concentration and temperature. The adsorption of the molecule on the copper surface follows the modified Langmuir model. The thermodynamic quantities of adsorption and activation were determined and discussed. The calculated quantum chemical parameters related to the inhibition efficiency are the energy of the highest occupied molecular orbital E(HOMO), the energy of the lowest unoccupied molecular orbital E(LUMO), the HOMO-LUMO energy gap, the hardness (η), softness (S), dipole moment (μ), electron affinity (A), ionization energy (I), absolute electronegativity (χ),absolute electronegativity (χ), fraction (ΔN) of electrons transferred from Atenolol to copper and electrophilicity index(ω). The local reactivity was analyzed through the condensed Fukui function and condensed softness indices to determine the nucleophilic and electrophilic attack sites. There is good agreement between the experimental and theoretical results.


Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5738
Author(s):  
Vinay Kishnani ◽  
Anshul Yadav ◽  
Kunal Mondal ◽  
Ankur Gupta

The adsorption characteristics of H2 molecules on the surface of Pd-doped and Pd-decorated graphene (G) have been investigated using density functional theory (DFT) calculations to explore the sensing capabilities of Pd-doped/decorated graphene. In this analysis, electrostatic potential, atomic charge distribution, 2D and 3D electron density contouring, and electron localization function projection, were investigated. Studies have demonstrated the sensing potential of both Pd-doped and Pd-decorated graphene to H2 molecules and have found that the gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), i.e., the HOMO-LUMO gap (HLG), decreases to 0.488 eV and 0.477eV for Pd-doped and Pd-decorated graphene, respectively. When H2 is adsorbed on these structures, electrical conductivity increases for both conditions. Furthermore, chemical activity and electrical conductivity are higher for Pd-decorated G than Pd-doped G, whereas the charge transfer of Pd-doped graphene is far better than that of Pd-decorated graphene. Also, studies have shown that the adsorption energy of Pd-doped graphene (−4.3 eV) is lower than that of Pd-decorated graphene (−0.44 eV); a finding attributable to the fact that the recovery time for Pd-decorated graphene is lower compared to Pd-doped graphene. Therefore, the present analysis confirms that Pd-decorated graphene has a better H2 gas sensing platform than Pd-doped graphene and, as such, may assist the development of nanosensors in the future.


Molecules ◽  
2021 ◽  
Vol 26 (16) ◽  
pp. 5051
Author(s):  
Lukas Kletsch ◽  
Rose Jordan ◽  
Alicia S. Köcher ◽  
Stefan Buss ◽  
Cristian A. Strassert ◽  
...  

The three complexes [M(Me2dpb)Cl] (M = Ni, Pd, Pt) containing the tridentate N,C,N-cyclometalating 3,5-dimethyl-1,5-dipyridyl-phenide ligand (Me2dpb−) were synthesised using a base-assisted C‒H activation method. Oxidation potentials from cyclic voltammetry increased along the series Pt < Ni < Pd from 0.15 to 0.74 V. DFT calculations confirmed the essentially ligand-centred π*-type character of the lowest unoccupied molecular orbital (LUMO) for all three complexes in agreement with the invariant reduction processes. For the highest occupied molecular orbitals (HOMO), contributions from metal dyz, phenyl C4, C2, C1, and C6, and Cl pz orbitals were found. As expected, the dz2 (HOMO-1 for Ni) is stabilised for the Pd and Pt derivatives, while the antibonding dx2−y2 orbital is de-stabilised for Pt and Pd compared with Ni. The long-wavelength UV-vis absorption band energies increase along the series Ni < Pt < Pd. The lowest-energy TD-DFT-calculated state for the Ni complex has a pronounced dz2-type contribution to the overall metal-to-ligand charge transfer (MLCT) character. For Pt and Pd, the dz2 orbital is energetically not available and a strongly mixed Cl-to-π*/phenyl-to-π*/M(dyz)-to-π* (XLCT/ILCT/MLCT) character is found. The complex [Pd(Me2dpb)Cl] showed a structured emission band in a frozen glassy matrix at 77 K, peaking at 468 nm with a quantum yield of almost unity as observed for the previously reported Pt derivative. No emission was observed from the Ni complex at 77 or 298 K. The TD-DFT-calculated states using the TPSSh functional were in excellent agreement with the observed absorption energies and also clearly assessed the nature of the so-called “dark”, i.e., d‒d*, excited configurations to lie low for the Ni complex (≥3.18 eV), promoting rapid radiationless relaxation. For the Pd(II) and Pt(II) derivatives, the “dark” states are markedly higher in energy with ≥4.41 eV (Pd) and ≥4.86 eV (Pt), which is in perfect agreement with the similar photophysical behaviour of the two complexes at low temperatures.


Sign in / Sign up

Export Citation Format

Share Document