The combination of high-temperature fermentation and membrane separation has the potential to realize a simple on-site process to produce concentrated bioethanol. The performance of dehydration membranes in separating bioethanol was investigated in this study. Three types of zeolite membranes, LTA, MFI, and MOR, were synthesized. Their dehydration ability was compared using a bioethanol solution produced by high-temperature fermentation followed by vacuum distillation. The LTA zeolite membranes deformed and became amorphous while treating the distillate. On the contrary, no significant changes were observed in the MFI and MOR zeolite membranes analyzed by X-ray diffraction after treating the distillate. However, the flux declined when the membranes were in contact with the distillate (pH = 3.8). Neutralizing the distillate to pH 6.6 with sodium hydroxide did not prevent the flux decline. Even though flux decreased by about 20–30%, the MOR membrane showed quite high water-selectivity, with a water concentration of over 99.9% in the permeate, suggesting the feasibility of its application to concentrate bioethanol.
Zeolite membranes – The importance of support analysis