Features of Brass Processing with Powerful Ultraviolet Lasers of Nanosecond Duration

We investigated the process of laser heat treatment of polished brass samples (36% zinc, containing a small amount of lead, which does not dissolve in the alloy and is in the form of inclusions, having micron and submicron size) by impacting to a series of 25 - 30 ultraviolet (UV) pulses of a Nd:YAG laser (third harmonic, wavelength λ = 355 nm, duration τ = 10 ns, pulse repetition rate f = 10 Hz, pulse energy density ~ 0.15 - 1.0 J/cm2) in the stationary spot mode. Copper and its alloys absorb up to 90% of the energy of this laser. It is found that the relaxation of the absorbed energy of laser radiation in the metal occurs nonuniformly. Defects in the metal structure such as grain boundaries and lead inclusions are visualized. Traces of crystallographic sliding appear inside some grains. With an increase in the number of impacting impulses, accumulation of damage is observed. A further increase in the radiation energy density leads to an aggravation of the observed phenomena.

Предпороговые эффекты при воздействии ультрафиолетовых лазерных импульсов на медь и ее сплавы

The prethreshold processes on the surface of copper and its alloys are investigated. In the absence of obvious traces of melting, while preserving the metal in a condensed state, under a nanosecond ultraviolet laser radiation energy density of 0.1–1.0 J/cm2, manifestations of high-temperature plastic deformation were observed. These are sliding and cracking along grain boundaries, within which crystallographic slipping was observed. A microprotrusion was formed on the surface of the irradiated zone, which was outwardly similar the distribution of laser radiation in the spot. The height of the microprotrusion reached 1 µm, and sometimes even more. An increase in the number of impacting impulses led to the accumulation of damage. The data obtained are in many ways similar to the acoustoplastic, electroplastic, and magnetoplastic effects. By analogy, we consider it possible to call the discovered effect optoplastic.

Kinetics of Damage of Materials under Various Regimes of Re-Changeable Loads

Kinetics of accumulation of damages in engineering objects, which work at repeated-alternating soft and hard modes of loading of details and elements of constructions of vehicles (cars, cars, railway transport, etc.). When changing the direction of the load force to the opposite in the structural material there is a phenomenon of changing the kinetics of accumulation of damage, ie the damage factor at separation and shear changes, which affects the effective stresses and service life of equipment. This effect of the factor of the influence of repeated variables on the redistribution of the kinetics of damage accumulation is considered experimentally for materials with different plastic properties

BRCA1 Interactors - Rad50 and BRIP1: As Prognostic and Predictive Molecules for the Severity of Triple-Negative Breast Cancer

BRIP1 is one of the major interacting partner of BRCA1 which plays an important role in repair by homologous recombination (HR). This gene is mutated in around 4% cases of breast cancer, however, its mechanism of action is unclear. In this study, we presented the fundamental role of BRCA1 interactors BRIP1 and RAD50 in the development of differential severity in Triple-Negative Breast Cancer(TNBC) among various affected individuals. We showed that in some TNBC lines like MDA-MB-231 the functioning of both BRCA1/TP53 is compromised. Furthermore, the sensing of DNA damage is affected, depicted through the low expression of damage sensing molecule Rad50 and reduced formation of H2AX foci. Due to less damage sensing capability and low availability of BRCA1 at the damage sites, the repair by HR becomes inefficient leading to more damage. Accumulation of damage sends a signal for over activation of NHEJ repair pathways. Over expressed NHEJ molecules with compromised HR and checkpoint conditions lead to higher proliferation and error-prone repair, which increases the mutation rate and corresponding tumor severity. The severity phenotypes were more in cells having compromised BRCA1-BRIP1 functioning. The in silico analysis of the TCGA-UCSC xena datasets with genes expression in deceased population shows a significant correlation of BRCA1 expression with OS in TNBCs (0.0272). The association of BRCA1 with OS becomes stronger with the addition of BRIP1expression (0.000876**). Since the overall survival(OS) is directly proportional to the extent of severity, the data analysis hints at the role of BRIP1 in controlling the severity of TNBC.

Impaired Mitophagy in Neurons and Glial Cells during Aging and Age-Related Disorders

Aging is associated with a decline in cognitive function, which can partly be explained by the accumulation of damage to the brain cells over time. Neurons and glia undergo morphological and ultrastructure changes during aging. Over the past several years, it has become evident that at the cellular level, various hallmarks of an aging brain are closely related to mitophagy. The importance of mitochondria quality and quantity control through mitophagy is highlighted by the contribution that defects in mitochondria–autophagy crosstalk make to aging and age-related diseases. In this review, we analyze some of the more recent findings regarding the study of brain aging and neurodegeneration in the context of mitophagy. We discuss the data on the dynamics of selective autophagy in neurons and glial cells during aging and in the course of neurodegeneration, focusing on three mechanisms of mitophagy: non-receptor-mediated mitophagy, receptor-mediated mitophagy, and transcellular mitophagy. We review the role of mitophagy in neuronal/glial homeostasis and in the molecular pathogenesis of neurodegenerative disorders, such as Parkinson’s disease, Alzheimer’s disease, and other disorders. Common mechanisms of aging and neurodegeneration that are related to different mitophagy pathways provide a number of promising targets for potential therapeutic agents.

The strength of the communication elements of pneumatic tires as composite material

The mechanical properties at the boundary of the distribution of the rubber matrix and metal and fabric fibrous materials as a separate area in the mechanism of crack inhibition and its effect on the durability of pneumatic tires during the accumulation of damage during operation are considered. Experimental studies on the stratification of the elements of the composition of the tire material in samples made from different parts of the car tire. The strength at the contact boundary "rubber matrix-fibers of metal cord" and between the fibers of the cord, which allows to assess the total strength of the tire material as a composition of reinforcing elements and the matrix in the accumulation of damage created during operation, artificial the nature and behavior of the rupture of the samples during the tests, the morphology of fracture on the surface of the interaction of the reinforcing fibers of the wire with the rubber matrix was evaluated.

Impact of Load Retention on Aircraft Engine Parts Under Real Flight Cycle Conditions in Service Life Monitoring

One of the major problems in the development of algorithms for monitoring the life of aircraft gas turbine engines is that the character of loading in real flight cycles is crucially different from the character of the static and dynamic loading during the testing of samples. This paper proposes a method for taking into account the effect of retentions at maximum stresses and cycle temperatures on the low-cycle fatigue (LCF) of the heat-resistant alloys used in engine parts. Regularities in repeated-static loading (RSL) are used in combination with the method of linear accumulation of damage due to the LCF and RSL, with retentions of a variable length. A non-linear equation is derived for the summation of these damages, the solution of which determines the durability (life) of the part while taking into account the retention duration. The theoretical results were verified by using the experimental characteristics of the GS-6K and EI-437B nickel-based alloys, previously reported by other researchers.

Cytogenetic analysis in exfoliated buccal epithelial cells of the workers who come into contact with pesticides

Introducton. Due to the increasing volumes of toxic substances entering the environment, including genotoxicants, it becomes necessary to conduct studies to assess their impact on people living in areas with high levels of pollutants, as well as people working in hazardous conditions. Epidemiological studies, in which damage to hereditary structures in human cells is assessed, in peripheral blood lymphocytes and buccal epithelial cells mainly, are carried out to determine the real genetic risk. Materials and methods. Samples of buccal epithelium were used. The study involved 69 people: 28 in the control group and 41 in the group of persons who were in contact with pesticides. The cytomorphological analysis took into account the following indicators: cytogenetic, cell proliferation, early and late destruction of nuclei. Results. The frequency of occurrence of the cells with micronuclei and protrusions in persons who were in contact with pesticides during their professional activities was increased 2.2 times, the frequency of cells with atypical nuclei - 2.5 times (differences in cytogenetic parameters between the groups were statistically insignificant). Statistically significant changes in the proliferation indicator were revealed - the frequency of cells with two nuclei (1.6 times), as well as the destruction indicators - karyorrhexis (4.5 times more often in nonsmokers and 8.2 times more often in smokers who work with pesticides) and karyolysis (the frequency of cells with initial karyolysis was increased by 3.4 times and 3.2 times with complete karyolysis). The index of accumulation of damage disorders was shown to be 4 times higher. Conclusion. The obtained data indicate an increased risk of damage to the genetic apparatus of cells in persons whose professional activities are associated with testing and using pesticides.

Impact of Hydrogen Peroxide on Protein Synthesis in Yeast

Cells must be able to respond and adapt to different stress conditions to maintain normal function. A common response to stress is the global inhibition of protein synthesis. Protein synthesis is an expensive process consuming much of the cell’s energy. Consequently, it must be tightly regulated to conserve resources. One of these stress conditions is oxidative stress, resulting from the accumulation of reactive oxygen species (ROS) mainly produced by the mitochondria but also by other intracellular sources. Cells utilize a variety of antioxidant systems to protect against ROS, directing signaling and adaptation responses at lower levels and/or detoxification as levels increase to preclude the accumulation of damage. In this review, we focus on the role of hydrogen peroxide, H2O2, as a signaling molecule regulating protein synthesis at different levels, including transcription and various parts of the translation process, e.g., initiation, elongation, termination and ribosome recycling.