Recommendations for handling bitumen prior to FTIR spectroscopy

The application of chemical analysis on bituminous materials has increased drastically over the past decades. One of the most common spectroscopic methods used in the field of research is Attenuated Total Reflection (ATR) Fourier Transform Infrared (FTIR) spectroscopy. Since ATR-FTIR is a surface sensitive method, sample or specimen handling of a complex material like bitumen prior to its analysis needs to be considered, especially for people new to the field or analysis technique. This study looks at the impact of heating time and temperature as well as storage time and conditions on the oxidation of the bituminous specimen. Four binders from the same crude oil source but different specification classes (unmodified and styrene–butadiene–styrene polymer modified) and two binders from different crude oil sources were investigated. The results show that heating small quantities of bitumen at 180 °C for up to 30 min has little impact on the formation of oxidized species, when proper thermal monitoring is conducted. Special cases where oxidation does occur are reported in detail. Furthermore, strong oxidation is induced by day light, when bitumen is stored behind glass with no UV radiation present, which can reach short-term ageing level within 1 h. Thus, heating bitumen at 180 °C for 5–10 min followed by storage in the dark, climatized room and measured within one hour after preparation is recommended. These results should act as recommendation for future specimen handling prior to FTIR spectroscopic analysis to ensure unbiased and comparable measurements.

Synthesis of Galactomannan Sulfate-Citrate

Sulfated derivatives of polysaccharides have anticoagulant, hypolipedimic and other biological activity. In this work, a complex mixed ester of galactomannan, its sulfate-citrate, was obtained for the first time. The introduction of citrate and sulfate groups was proved by FTIR spectroscopy by the appearance of corresponding absorption bands. It was shown by X-ray diffraction that the introduction of the citrate group leads to the amorphization of the galactomannan structure.

Metabolic Profile Characterization of Different Thyroid Nodules Using FTIR Spectroscopy: A Review

Thyroid cancer’s incidence has increased in the last decades, and its diagnosis can be a challenge. Further and complementary testing based in biochemical alterations may be important to correctly identify thyroid cancer and prevent unnecessary surgery. Fourier-transform infrared (FTIR) spectroscopy is a metabolomic technique that has already shown promising results in cancer metabolome analysis of neoplastic thyroid tissue, in the identification and classification of prostate tumor tissues and of breast carcinoma, among others. This work aims to gather and discuss published information on the ability of FTIR spectroscopy to be used in metabolomic studies of the thyroid, including discriminating between benign and malignant thyroid samples and grading and classifying different types of thyroid tumors.

Know your enemy: Application of ATR-FTIR spectroscopy to invasive species control

Extreme weather and globalisation leave our climate vulnerable to invasion by alien species, which have negative impacts on the economy, biodiversity, and ecosystem services. Rapid and accurate identification is key to the control of invasive alien species. However, visually similar species hinder conservation efforts, for example hybrids within the Japanese Knotweed complex. We applied the novel method of ATR-FTIR spectroscopy combined with chemometrics (mathematics applied to chemical data) to historic herbarium samples, taking 1580 spectra in total. Samples included five species from within the interbreeding Japanese Knotweed complex (including three varieties of Japanese Knotweed), six hybrids and five species from the wider Polygonaceae family. Spectral data from herbarium specimens were analysed with several chemometric techniques: support vector machines (SVM) for differentiation between plant types, supported by ploidy levels; principal component analysis loadings and spectral biomarkers to explore differences between the highly invasive Reynoutria japonica var. japonica and its non-invasive counterpart Reynoutria japonica var. compacta; hierarchical cluster analysis (HCA) to investigate the relationship between plants within the Polygonaceae family, of the Fallopia, Reynoutria, Rumex and Fagopyrum genera. ATR-FTIR spectroscopy coupled with SVM successfully differentiated between plant type, leaf surface and geographical location, even in herbarium samples of varying age. Differences between Reynoutria japonica var. japonica and Reynoutria japonica var. compacta included the presence of two polysaccharides, glucomannan and xyloglucan, at higher concentrations in Reynoutria japonica var. japonica than Reynoutria japonica var. compacta. HCA analysis indicated that potential genetic linkages are sometimes masked by environmental factors; an effect that can either be reduced or encouraged by altering the input parameters. Entering the absorbance values for key wavenumbers, previously highlighted by principal component analysis loadings, favours linkages in the resultant HCA dendrogram corresponding to expected genetic relationships, whilst environmental associations are encouraged using the spectral fingerprint region. The ability to distinguish between closely related interbreeding species and hybrids, based on their spectral signature, raises the possibility of using this approach for determining the origin of Japanese knotweed infestations in legal cases where the clonal nature of plants currently makes this difficult and for the targeted control of species and hybrids. These techniques also provide a new method for supporting biogeographical studies.

Recent applications of quantitative analytical FTIR spectroscopy in pharmaceutical, biomedical, and clinical fields: A brief review

Qualitative Fourier transform infrared (FTIR) spectroscopy has long been established and implemented in a wide variety of fields including pharmaceutical, biomedical, and clinical fields. While the quantitative applications are yet to reach their full potential, this technique is flourishing. It is tempting to shed light on modern engaging and the applicability of analytical quantitative FTIR spectroscopy in the aforementioned fields. More importantly, the credibility, validity, and generality of the application will be thoroughly demonstrated by reviewing the latest published work in the scientific literature. Utilizing FTIR spectroscopy in a quantitative approach in pharmaceutical, biomedical, and interdisciplinary fields has many undeniable advantages over traditional procedures. An insightful account will be undertaken in this regard. The technique will be introduced as an appealing alternative to common methods such as high performance liquid chromatography. It is anticipated that the review will offer researchers an update of the current status and prospect on the subject among the pharmacy and biomedical sciences both in academic and industrial fields.

GdxFe3-xO4 nanoparticles with silane shell as potential theranostic agent for cancer treatment

In this study of GdxFe3-xO4 compound core silane shell nanoparticles method is represented.Samples were analyzed with SEM, EDA and FTIR spectroscopy. Further attaching of carborane compounds is discussed. Products can be used in biomedical applications for MRI imaging and drug delivery for NCT, so can be considered as potential theranostic agents for cancer treatment.