Testing the Synchronicity of Splay-Fault Ruptures in Carson Valley, Nevada, United States

ABSTRACT The Carson City and Indian Hills faults in Carson City, Nevada, splay northeastward from the major range-bounding Genoa fault. Each splay is part of the Carson range fault system that extends nearly 100 km northward from near Markleeville, California, to Reno, Nevada. Stratigraphic and structural relationships exposed in paleoseismic excavations across the two faults yield a record of ground-rupturing earthquakes. The most recent on the Carson City fault occurred around 473–311 B.P., with the two penultimate events between 17.9 and 8.1 ka. Two trench exposures across the Indian Hills fault record the most recent earthquake displacement after ∼900 yr, preceded by a penultimate surface rupture ≥∼10,000, based on radiocarbon and infrared-stimulated luminescence dating of exposed sediments. The age estimates allow that the Carson City and Indian Hills faults ruptured simultaneously with a previously reported large earthquake on the Genoa fault ∼514–448 B.P. Similar synchronicity of rupture is not observed in the record of penultimate events. Penultimate ages of ruptures on the Carson City and Indian Hills faults are several thousand years older than that of the Genoa fault from which they splay. Together, these observations imply a variability in rupture moment through time, demonstrating the importance of considering multi-fault rupture models for seismic hazard analyses.

Characterization of fault plane and coseismic slip for the 2 May 2020, <i>M</i>_w 6.6 Cretan Passage earthquake from tide gauge tsunami data and moment tensor solutions

We present a source solution for the tsunami generated by the Mw 6.6 earthquake that occurred on 2 May 2020, about 80 km offshore south of Crete, in the Cretan Passage, on the shallow portion of the Hellenic Arc subduction zone (HASZ). The tide gauges recorded this local tsunami on the southern coast of Crete and Kasos island. We used Crete tsunami observations to constrain the geometry and orientation of the causative fault, the rupture mechanism, and the slip amount. We first modelled an ensemble of synthetic tsunami waveforms at the tide gauge locations, produced for a range of earthquake parameter values as constrained by some of the available moment tensor solutions. We allow for both a splay and a back-thrust fault, corresponding to the two nodal planes of the moment tensor solution. We then measured the misfit between the synthetic and the Ierapetra observed marigram for each source parameter set. Our results identify the shallow, steeply dipping back-thrust fault as the one producing the lowest misfit to the tsunami data. However, a rupture on a lower angle fault, possibly a splay fault, with a sinistral component due to the oblique convergence on this segment of the HASZ, cannot be completely ruled out. This earthquake reminds us that the uncertainty regarding potential earthquake mechanisms at a specific location remains quite significant. In this case, for example, it is not possible to anticipate if the next event will be one occurring on the subduction interface, on a splay fault, or on a back-thrust, which seems the most likely for the event under investigation. This circumstance bears important consequences because back-thrust and splay faults might enhance the tsunamigenic potential with respect to the subduction interface due to their steeper dip. Then, these results are relevant for tsunami forecasting in the framework of both the long-term hazard assessment and the early warning systems.

Indikasi Sesar Naik di Plampang, Pulau Sumbawa Berdasarkan Analisis Gempa Bumi 13 Juni 2020

ABSTRAK. Keberadaan sesar aktif dengan pola sesar naik di daerah Plampang berhasil diungkap dari sebaran hiposenter terelokasi, hasil inversi momen tensor, dan pemodelan perubahan tegangan Coulomb. Studi ini juga berhasil mengungkap sumber gempa pada sesar aktif tersebut dengan kedalaman relatif dangkal yang bisa menjadi ancaman di Pulau Sumbawa jika magnitudo maksimumnya rilis di masa yang akan datang. Hasil relokasi hiposenter menunjukkan sebaran episenter berarah barat daya–timur laut. Hal ini didukung juga oleh hasil inversi momen tensor yang menunjukkan bidang sesar berarah barat daya–timur laut (N2240E) dengan dip cukup curam (490). Penampang seismisitas vertikal pada arah dip menunjukkan adanya pola sesar naik yang semakin landai seiring bertambahnya kedalaman. Bidang sesar yang landai menunjukkan struktur decollement pada kedalaman 10–15 km dan berangsur menjadi curam sebagai struktur splay fault pada kedalaman 0–10 km. Hal tersebut konsisten dengan hasil inversi momen tensor yang menunjukkan mekanisme pergerakan sesar naik terjadi pada kedalaman 7 km. Pemodelan perubahan tegangan Coulomb menunjukkan adanya penambahan stress di luar area bidang sesar sehingga memicu terjadinya aftershocks. Sebaran gempa susulan menunjukkan adanya bidang sesar hipotetik dengan panjang 19 km dan lebar 12 km. Sesar sebesar ini berpotensi membangkitkan gempa dengan kekuatan Mw 6,4. Gempa Sumbawa 13 Juni 2020 dengan magnitudo M 5,3 disebabkan oleh sebagian kecil aktivitas dari bidang sesar tersebut.ABSTRACT. The existence of an active fault with a reverse fault mechanism in the Plampang area is successfully delineated from the distribution of the relocated hypocenter, the moment tensor inversion, and the Coulomb stress changes. This study also reveals the source of the earthquake in the active fault with a relatively shallow depth which can be a threat on Sumbawa Island if the maximum magnitude is released in the future. Seismicity from hypocenter relocation shows the distribution of the epicenter with a southwest–northeast direction. It is also supported by the moment tensor inversion result which shows the fault plane trending southwest–northeast (N2240E) with a steep dip (490). The vertical section of seismicity in the dip direction shows that the slope of the plane has a lower angle with increasing depth. The lower angle of a fault plane shows a decollement structure at a depth of 10–15 km and gradually becomes steep as a splay fault structure at a depth of 0–10 km. It is consistent with the result of moment tensor inversion which shows the mechanism of a reverse fault that occurred at a depth of 7 km. The Coulomb stress changes show the stress increasing outside the fault plane area, which triggers aftershocks. The distribution of aftershocks shows a hypothetical fault plane of 19 km long and 12 km wide. A fault of this size has the potential to generate an earthquake with a magnitude maximum of Mw 6.4. The Sumbawa earthquake on June 13, 2020, having M 5.3 was caused by a small part of the activity from the fault.

Characterisation of fault plane and coseismic slip for the May 2, 2020, Mw 6.6 Cretan Passage earthquake from tide-gauge tsunami data and moment tensor solutions

We present a source solution for the tsunami generated by the Mw 6.6 earthquake that occurred on May 2, 2020, about 807thinsp;km offshore south of Crete, in the Cretan Passage, on the shallow portion of the Hellenic Arc Subduction Zone (HASZ). The tide-gauges recorded this local tsunami on the southern coast of Crete island and Kasos island. We used these tsunami observations to constrain the geometry and orientation of the causative fault, the rupture mechanism and the slip amount. We first modelled an ensemble of synthetic tsunami waveforms at the tide-gauge locations, produced for a range of earthquake parameter values as constrained by some of the available moment tensor solutions. We allow for both a splay and a back-thrust fault, corresponding to the two nodal planes of the moment tensor solution. We then measured the misfit between the synthetic and the observed marigrams for each source parameter set. Our results identify the shallow steeply-dipping back-thrust fault as the one producing the lowest misfit to the tsunami data. However, a rupture on a lower angle fault, possibly a splay fault, with a sinistral component due to the oblique convergence on this segment of the HASZ, cannot be completely ruled out. This earthquake reminds us that the uncertainty regarding potential earthquake mechanisms at a specific location remains quite significant. In this case, for example, it is not possible to anticipate if the next event will be one occurring on the subduction interface, on a splay fault, or on a back-thrust which seems the most likely for the event under investigation. This circumstance bears important consequences because back-thrust and splay faults might enhance the tsunamigenic potential with respect to the subduction interface due to their steeper dip. Then, these results are relevant for tsunami forecasting both in the framework of the long-term hazard assessment and of the early warning systems.

On the kinematics and timing of Rodinia breakup: a possible rift–transform junction of Cryogenian age at the southwest cape of Congo Craton (northwest Namibia)

After tilt correction for Ediacaran thick-skinned folding, a pair of Cryogenian half grabens at the autochthonous southwest cape of Congo Craton (CC) in northwest Namibia restore to different orientations. Toekoms sub-basin trended east-northeast, parallel to Northern Zone (NZ) of Damara belt, and was bounded by a normal-sense growth fault (2 290 m throw) dipping 57° toward CC. Soutput sub-basin trended northwest, oblique to NZ and to north-northwest-trending Kaoko Belt. It was bounded by a growth fault (750 m down-dip throw) dipping steeply (~75°) toward CC. Soutput growth fault could be an oblique (splay) fault connecting a Cryogenian rift zone in NZ with a sinistral transform zone in Kaoko Belt. A transform origin for the Kaoko margin accords with its magma-poor abrupt shelf-to-basin change implying mechanical strength, unlike the magma-rich southern margin where a gradual shelf-to-basin change implies a mechanically weak extended margin. A rift−transform junction is kinematically compatible with observed north-northwest−south-southeast Cryogenian crustal stretching within CC. Post-rift subsidence of the CC carbonate platform varies strongly across the south-facing but not the west-facing shelf. A sheared western CC margin differs from existing Kaoko Belt models that posit orthogonal opening with hyper-extended continental crust. Carbonate-dominated sedimentation over southwest CC implies palaeolatitudes ≤35° between 770 and 600 Ma.

Subducting oceanic basement roughness impacts on upper-plate tectonic structure and a backstop splay fault zone activated in the southern Kodiak aftershock region of the Mw 9.2, 1964 megathrust rupture, Alaska

In 1964, the Alaska margin ruptured in a giant Mw 9.2 megathrust earthquake, the second largest during worldwide instrumental recording. The coseismic slip and aftershock region offshore Kodiak Island was surveyed in 1977–1981 to understand the region’s tectonics. We re-processed multichannel seismic (MCS) field data using current standard Kirchhoff depth migration and/or MCS traveltime tomography. Additional surveys in 1994 added P-wave velocity structure from wide-angle seismic lines and multibeam bathymetry. Published regional gravity, backscatter, and earthquake compilations also became available at this time. Beneath the trench, rough oceanic crust is covered by ∼3–5-km-thick sediment. Sediment on the subducting plate modulates the plate interface relief. The imbricate thrust faults of the accreted prism have a complex P-wave velocity structure. Landward, an accelerated increase in P-wave velocities is marked by a backstop splay fault zone (BSFZ) that marks a transition from the prism to the higher rigidity rock beneath the middle and upper slope. Structures associated with this feature may indicate fluid flow. Farther upslope, another fault extends &gt;100 km along strike across the middle slope. Erosion from subducting seamounts leaves embayments in the frontal prism. Plate interface roughness varies along the subduction zone. Beneath the lower and middle slope, 2.5D plate interface images show modest relief, whereas the oceanic basement image is rougher. The 1964 earthquake slip maximum coincides with the leading and/or landward flank of a subducting seamount and the BSFZ. The BSFZ is a potentially active structure and should be considered in tsunami hazard assessments.

Seismic images of the Northern Chilean subduction zone at 19°40′S, prior to the 2014 Iquique earthquake

SUMMARY The Northern Chilean subduction zone is characterized by long-term subduction erosion with very little sediment input at the trench and the lack of an accretionary prism. Here, multichannel seismic reflection (MCS) data were acquired as part of the CINCA (Crustal Investigations off- and onshore Nazca Plate/Central Andes) project in 1995. These lines cover among others the central part of the MW 8.1 Iquique earthquake rupture zone before the earthquake occurred on 1 April 2014. We have re-processed one of the lines crossing the updip parts of this earthquake at 19°40′S, close to its hypocentre. After careful data processing and data enhancement, we applied a coherency-based pre-stack depth migration algorithm, yielding a detailed depth image. The resulting depth image shows the subduction interface prior to the Iquique megathrust earthquake down to a depth of approximately 16 km and gives detailed insight into the characteristics of the seismogenic coupling zone. We found significantly varying interplate reflectivity along the plate interface which we interpret to be caused by the comparably strong reflectivity of subducted fluid-rich sediments within the grabens and half-grabens that are predominant in this area due to the subduction-related bending of the oceanic plate. No evidence was found for a subducted seamount associated to the Iquique Ridge along the slab interface at this latitude as interpreted earlier from the same data set. By comparing relocated fore- and aftershock seismicity of the Iquique earthquake with the resulting depth image, we can divide the continental wedge into two domains. First, a frontal unit beneath the lower slope with several eastward dipping back-rotated splay faults but no seismicity in the upper plate as well as along the plate interface. Secondly, a landward unit beneath the middle slope with differing reflectivity that shows significant seismicity in the upper plate as well as along the plate interface. Both units are separated by a large eastward dipping mega splay fault, the root zone of which shows diffuse seismicity, both in the upper plate and at the interface. The identification of a well-defined nearly aseismic frontal unit sheds new light on the interplate locking beneath the lower continental slope and its controls.