Utilization of idle time slot in spectrum sensing under noise uncertainty

<p>Spectrum sensing in cognitive radio (CR) is a critical process as it directly influences the accuracy of detection. Noise uncertainty affects the reliability of detecting vacant holes in the spectrum, thus limiting the access of that spectrum by secondary users (SUs). In such uncertain environment; SUs sense the received power of a primary user (PU) independently with different measures of signal-to-noise ratio (SNR). Long sensing time serves in mitigating the effect of noise uncertainty, but on the cost of throughput performance of CR system. In this paper, the scheme of an asynchronous and crossed sensing-reporting is presented. The scheme reduces energy consumption during sensing process without affecting the detection accuracy. Exploiting the included idle time (𝑇𝑖) in sensing time slot; each SU collects power samples with higher SNR directly performs the reporting process to a fusion center (FC) consecutively. The FC terminates the sensing and reporting processes at a specific sensing time that corresponds to the lowest SNR (𝑆𝑁𝑅𝑤𝑎𝑙𝑙). Furthermore, this integrated scheme aims at optimizing the total frame duration (𝑇𝑓). Mathematical expressions of the scheme are obtained. Analytical results show the efficiency of the scheme in terms of energy saving and throughput increment under noise uncerainty.</p>

Radio Over Fiber System for A Four-Store Hospital Building

The goal of this project is to design and analyse a radio over fibre system for a four-story hospital with 20 rooms on each floor. The number of ONUs per floor is 20, and it was assumed that each room had an ONU capable of providing network access to voice, data, video, and biometrics. We build an 80-channel WDM optical transmitter using the WDM method. The proposed system includes a transmitter with 20 input channels, a multiplexer, a DE multiplexer, a 45-kilometer optical fibre, and an amplifier. The proposed model was simulated, and the results were evaluated in WDM systems using an optical amplifier. The receiver performance analysis of the Optical Communication System is shown by the BER simulation run and the eye diagram graphic, with the threshold set at 0.00120739. Furthermore, the eye height is 0.00141402, and the minimum BER is 5.59009e-006. When the simulated and calculated values of received power and total power loss are compared, the system is efficient. Keywords: Radio over fibre, Optical Amplifier, WDM system, DE multiplexer, Multiplexer, BER, Optical transmitter

Optimization of Low Site Density Area for 4G Network in Urban City

The development of telecommunications is currently growing rapidly, especially in urban areas. To obtain optimal data services for users, the performances of 4G network services must continue to be optimized. It is known that many users are scattered in urban areas, but sometimes it is not balanced with an even distribution of the site in this area. This condition occurs because the distribution of the site is not evenly optimal distributed, either due to licensing constraints, limited land access for site development, or in terms of plans that have not been made. Balanced with the requirement of a 4G network, which is required, this "empty space" condition or low site density condition must find a solution or optimize it. Many optimization methods can optimize the area with low site density possibility. This study will optimize the area by adding a new site proposal based on coverage planning. We need to analyze Reference Signal Received Power (RSRP) coverage signal distribution using Atoll Planning Software. After optimization, the RSRP level below or equal -80 dBm increased from 75.195% to 94.08%. Furthermore, the percentage calculation for inadequate coverage (below -80 dBm) decreased from 24.816% to 5.931%. This RSRP signal level also shows that the condition after optimization with a new site can improve the signal level condition from areas with low site density possibility.

Implementation Mixed Wireless Network with Lower Number of Wi-Fi Routers for Optimal Coverage

With the development of various wireless communication networks, Wi-Fi Router positioning and deployment systems have become widely popular in recent years to improve coverage in various environments. In this paper, we present an appropriate mechanism for defining the deployment of Wi-Fi Routers to improve coverage in the Oxford Languages Institute (OLI) environment. In addition, the institute's environment was simulated using the Wireless InSite (WI) Package. In this work, two types of Wi-Fi Routers are used. The first is the TP-Link, while the second is the Rocket. These two devices operate at 2.4 and 5 GHz frequencies. There are two objectives in this work. The first aim is to determine the best location to cover the simulated scene environment in a better way. The second aim is to compare Wi-Fi Routers to find out which Wi-Fi Router is better and find out how many Wi-Fi Routers we need to cover the institute's environment. The comparison between Wi-Fi Routers was based on basic parameters to measure the performance of wireless networks, the most important of which are Coverage Rate (CR) Percentage, Signal Quality Rate (SQR), and Received Power Rate (RPR). According to the results that were shown on the Graphical User Interface (GUI) using MATLAB Software. We noticed that the CR, SQR, and RPR of the Rocket are 83.9080%, 97.0082%, and -35.2337 dBm respectively, and these results are better than the results provided by the TP-Link, as it gave the CR, SQR, and RPR are 32.1839%, 77.8690%, and -58.1685 dBm, respectively. Finally, we conclude that CR using the Rocket is good and we need one device to cover the institute’s environment. While CR using the TP-Link is bad and we need five devices to reach the coverage provided by the Rocket because the Rocket has high transmitted power and gain capacity.

Solar-Powered Improved Full Bridge Resonant Inverter for High-Frequency Industrial Applications

Electrical energy consumption is alarmingly rising, but the availability of conventional sources is limited. To meet the increasing demand; the implementation of non-conventional sources is the need of the hour. Solar energy is the most sustainable alternative for power generation among non-conventional sources families. Resonant inverters are used in low-power high-frequency induction heating appliances. Full-bridge resonant inverters are most commonly used to convert solar received power into the suitable form required for high-frequency application device by providing maximum power to the load at resonant frequency The aim of the paper is to analyze the working of the resonant inverter by taking the input supply from the solar panel and converting the obtained dc input to ac input through the resonant inverter. This obtained output is supplied for the high-frequency industrial application which mainly includes Induction frequency heating Applications. Induction heating is one of the techniques used in casting foundry for the treatment of metals. It involves the heat treatment of the metals namely annealing, hardening tempering method. goes here.

RM-ADR: Resource Management Adaptive Data Rate for Mobile Application in LoRaWAN

LoRaWAN is renowned and a mostly supported technology for the Internet of Things, using an energy-efficient Adaptive Data Rate (ADR) to allocate resources (e.g., Spreading Factor (SF)) and Transmit Power (TP) to a large number of End Devices (EDs). When these EDs are mobile, the fixed SF allocation is not efficient owing to the sudden changes caused in the link conditions between the ED and the gateway. As a result of this situation, significant packet loss occurs, increasing the retransmissions from EDs. Therefore, we propose a Resource Management ADR (RM-ADR) at both ED and Network Sides (NS) by considering the packet transmission information and received power to address this issue. Through simulation results, RM-ADR showed improved performance compared to the state-of-the-art ADR techniques. The findings indicate a faster convergence time by minimizing packet loss ratio and retransmission in a mobile LoRaWAN network environment.

A performance predictor of beamforming versus time-reversal based far-field wireless power transfer from linear array

For far-field wireless power transfer (WPT) in a complex propagation environment, a time-reversal (TR) based WPT that can overcome the drawbacks of conventional beamforming (BF) by taking advantage of multipath has been recently proposed. However, due to the WPT performance of BF and TR depending on the complexity of the propagation environment, the performance prediction between BF versus TR would be required. We present a detailed and generalized analysis of the recently proposed performance metric referred to as the peak received power ratio (PRPR) for linear array-based WPT. Here, the effectiveness of PRPR is verified via measurement for free space and indoor scenarios. The results demonstrate that PRPR is directly related to the complexity of the propagation environment and the corresponding power transmission capability of BF and TR. That is, the higher the complexity, the greater the value of PRPR and TR outperforms BF with higher peak power given the same average transmit power and vice versa. The mode decision between BF and TR based on PRPR potentially promises efficient far-field WPT even in a dynamic propagation environment.

Optimum Design of a Composite Optical Receiver by Taguchi and Fuzzy Logic Methods

This paper investigates a composite optical receiver for an indoor visible light communication (VLC) system. The optical gain, received power, and signal-to-noise ratio (SNR) are considered to be optimized. However, it is difficult to find a balance between them in general design and optimization. We propose the Taguchi and fuzzy logic combination method to improve multiple performance characteristics effectively in the optical receiver. The simulated results indicate that the designed receiver has the characteristics of an optical gain of 10.57, a half field of view (HFOV) of 45°, a received power of 6.4635 dBm, a signal-to-noise ratio (SNR) of 89.8874 dB, and a spot size of 2 mm. The appropriate weights of the three performance characteristics for the inputs of the fuzzy controllers increase the optical gain by 13.601 dB, and the received power and SNR by 11.097 dB and 0.373 dB, respectively. Therefore, the optical receiver optimally designed by the Taguchi and fuzzy logic methods can significantly meet the requirements of an indoor VLC system.

Coherent detection-based photonic radar for autonomous vehicles under diverse weather conditions

Autonomous vehicles are regarded as future transport mechanisms that drive the vehicles without the need of drivers. The photonic-based radar technology is a promising candidate for delivering attractive applications to autonomous vehicles such as self-parking assistance, navigation, recognition of traffic environment, etc. Alternatively, microwave radars are not able to meet the demand of next-generation autonomous vehicles due to its limited bandwidth availability. Moreover, the performance of microwave radars is limited by atmospheric fluctuation which causes severe attenuation at higher frequencies. In this work, we have developed coherent-based frequency-modulated photonic radar to detect target locations with longer distance. Furthermore, the performance of the proposed photonic radar is investigated under the impact of various atmospheric weather conditions, particularly fog and rain. The reported results show the achievement of significant signal to noise ratio (SNR) and received power of reflected echoes from the target for the proposed photonic radar under the influence of bad weather conditions. Moreover, a conventional radar is designed to establish the effectiveness of the proposed photonic radar by considering similar parameters such as frequency and sweep time.