Bacterial Cellulose (BC) and BC Composites: Production and Properties

The synthesis of bacterial cellulose (BC) by Komagataeibacter xylinus strain B-12068 was investigated on various C-substrates, under submerged conditions with stirring and in static surface cultures. We implemented the synthesis of BC on glycerol, glucose, beet molasses, sprat oil, and a mixture of glucose with sunflower oil. The most productive process was obtained during the production of inoculum in submerged culture and subsequent growth of large BC films (up to 0.2 m2 and more) in a static surface culture. The highest productivity of the BC synthesis process was obtained with the growth of bacteria on molasses and glycerol, 1.20 and 1.45 g/L per day, respectively. We obtained BC composites with silver nanoparticles (BC/AgNPs) and antibacterial drugs (chlorhexidine, baneocin, cefotaxime, and doripenem), and investigated the structure, physicochemical, and mechanical properties of composites. The disc-diffusion method showed pronounced antibacterial activity of BC composites against E. coli ATCC 25922 and S. aureus ATCC 25923.

The Effect of Wear Rate on Polymeric Composites Reinforced Nanoclays

This research aims to study the addition of nanoclays on unsaturated polyester (UP) and epoxy resin (EP) as filling and by weight percentage (2%, 4% and 6%) to this mixture and then study the extent of the effect of this addition on wear rate of the composites’ material where three loads were adopted (10, 15 and 20[Formula: see text]N), respectively, on the iron hard disk (269 HB) and copper hard disk of 111[Formula: see text]HB for the resin before and after adding the clays, where the approved sliding velocities were 4.1887, 3.1415 and 2.0943[Formula: see text]m/sec, respectively, and the test duration was 10 min on the test disc. Immersion of samples in the water for 2, 4, 6 and 8 weeks showed a clear improvement in the wear rate and tear values of dry and submerged conditions in a water under different conditions of load change, slipping speed, time and temperature stability after adding the nanoclays to the polymer.

Formation of Streptomyces protoplasts during cultivation in liquid media with lytic enzyme

Many streptomycetes strains are hardly or not at all transformable via protoplasts, or there is a problem with the regeneration of protoplasts. We found that protoplasts are formed directly in cultivation media under submerged conditions in the presence of lytic enzyme. Actinophage μ1/6 endolysin and lysozyme were used in this study. Streptomyces strains were cultivated in several media with glycine and lytic enzyme for 24 and 48h. The highest amounts of protoplasts (about 3 x 107 cfu/ml of cultivation medium) together with the highest regeneration (95%) and transformation frequency (about 2 x 106 – 107 cfu/μg DNA) were obtained reproducibly in YEME medium with high sucrose content. S. aureofaciens B96, as hardly transformable strain because of difficulties with protoplast preparation and their further regeneration, was used in this study. The same procedure was applied to S. lividans 66 TK24 and S. coelicolor A3(2), streptomycetes model strains, to confirm the general use of this method. Moreover, such cultivation process was appropriate for additional quick isolation of either chromosomal as well as plasmid DNA that could be further used in recombinant DNA techniques.

CRITICALITY SAFETY ANALYSIS OF THE DRY CASK DESIGN WITH AIR GAPS FOR RDNK SPENT PEBBLE FUELS STORAGECriticality Safety Analysis of the Dry Cask Design with Air Gaps for RDNK Spent Pebble Fuels Storage

Reaktor Daya Non-Komersial (RDNK) with a 10 MW thermal power has been proposed as one of the technology options for the first nuclear power plant program in Indonesia. The reactor is a High Temperature Gas-Cooled Reactor-type with spherical fuel elements called pebbles. To support this program, it is necessary to prepare dry cask to safely store the spent pebble fuels that will be generated by the RDNK. The dry cask design has been proposed based on the Castor THTR/AVR but modified with air gaps to facilitate decay heat removal. The objective of this study is to evaluate criticality safety through keff value of the proposed dry cask design for the RDNK spent fuel. The keff values were calculated using MCNP5 program for the dry cask with 25, 50, 75, and 100% of canister capacity. The values were calculated for dry casks with and without air gaps in normal, submerged, tumbled, and both tumbled and submerged conditions. The results of calculated keff values for the dry cask with air gaps at 100% of canister capacity from the former to the latter conditions were 0.127, 0.539, 0.123, and 0.539, respectively. These keff values were smaller than the criticality threshold value of 0.95. Therefore, it can be concluded that the dry cask with air gaps design comply the criticality safety criteria in the aforementioned conditions.

Production of xylanase by Fusarium oxysporum using agro-industrial waste

This study aimed to optimize the production of xylanase, under submerged conditions using Fusarium oxysporum. Firstly, it was carried out the selection of the best source of carbon from agricultural waste, such as soybean husk, cassava peel, pineapple crown, corn straw, rice husk, bacaba, barley bagasse and, corncob. They were milled and sieved with a maximum granulation of 1 mm. The cultures were carried out by 132 hours 30 °C and 180 rpm. Among the agroindustrial residues, corn straw was the one that stood out with a greater enzymatic activity of 12.6 U/mL. In the second step, it was used Plackett-Burman design to screen the nutrients sources important to xylanase production. Thus, independent variables significant were urea and MgSO4. These variables selected by Plackett-Burman were then used in a Central Composite Rotational Design present activity of 26.6 U/mL and the predicted was 34.5 U/mL. So, the xylanase production by F. oxysporum can be optimize using corn straw, a low-cost waste found in large quantities.

The Effect of Water Level in Rice Cropping System on Phosphorus Uptake Activity of Pup1 in a Pup1+Sub1 Breeding Line

Pyramiding useful QTLs into an elite variety is a promising strategy to develop tolerant varieties against multiple abiotic stresses. However, some QTLs may not be functionally compatible when they are introgressed into the same variety. Here, we tested the functional compatibility of Pup1 and Sub1, major QTLs for tolerance to phosphorus (P)-deficiency and submergence conditions, respectively. Phenotypic analysis revealed that IR64-Pup1+Sub1 (IPS) plants harboring both Pup1 and Sub1 QTLs show significant tolerance to submerged conditions, similarly to IR64-Sub1, while IPS failed to tolerate P deficiency and mild drought conditions; only IR64-Pup1 showed P deficiency tolerance. In submerged conditions, Sub1A and OsPSTOL1, major genes for Sub1 and Pup1 QTLs, respectively, were expressed at the same levels as in IPS and IR64-Sub1 and in IPS and IR64-Pup1, respectively. On the other hand, in P-non-supplied condition, crown root number, root length, and OsPSTOL1 expression level were significantly lower in IPS compared to those of IR64-Pup1. However, there was no significant difference in P content between IPS and IR64-Pup1. These results imply that Pup1 does not compromise Sub1 function in submerged condition, while Sub1 suppresses Pup1 function in P-non-supplied condition, possibly by regulating the transcript level of Pup1. In conclusion, Pup1 and Sub1 are regarded as functionally compatible under submergence condition but not under P-non-supplied condition. Further study is needed to elucidate the functional incompatibility of Pup1 and Sub1 QTLs in IPS under P-non-supplied condition.

In vitro-in vivo correlations of pulmonary inflammogenicity and genotoxicity of MWCNT

Background Multi-walled carbon nanotubes (MWCNT) have received attention due to extraordinary properties, resulting in concerns for occupational health and safety. Costs and ethical concerns of animal testing drive a need for in vitro models with predictive power in respiratory toxicity. The aim of this study was to assess pro-inflammatory response (Interleukin-8 expression, IL-8) and genotoxicity (DNA strand breaks) caused by MWCNT with different physicochemical properties in different pulmonary cell models and correlate these to previously published in vivo data. Seven MWCNT were selected; two long/thick (NRCWE-006/Mitsui-7 and NM-401), two short/thin (NM-400 and NM-403), a pristine (NRCWE-040) and two surface modified; hydroxylated (NRCWE-041) and carboxylated (NRCWE-042). Carbon black Printex90 (CB) was included as benchmark material. Human alveolar epithelial cells (A549) and monocyte-derived macrophages (THP-1a) were exposed to nanomaterials (NM) in submerged conditions, and two materials (NM-400 and NM-401) in co-cultures of A549/THP-1a and lung fibroblasts (WI-38) in an air-liquid interface (ALI) system. Effective doses were quantified by thermo-gravimetric-mass spectrometry analysis (TGA-MS). To compare genotoxicity in vitro and in vivo, we developed a scoring system based on a categorization of effects into standard deviation (SD) units (< 1, 1, 2, 3 or 4 standard deviation increases) for the increasing genotoxicity. Results Effective doses were shown to be 25 to 53%, and 21 to 57% of the doses administered to A549 and THP-1a, respectively. In submerged conditions (A549 and THP-1a cells), all NM induced dose-dependent IL-8 expression. NM-401 and NRCWE-006 caused the strongest pro-inflammatory response. In the ALI-exposed co-culture, only NM-401 caused increased IL-8 expression, and no DNA strand breaks were observed. Strong correlations were found between in vitro and in vivo inflammation when doses were normalized by surface area (also proxy for diameter and length). Significantly increased DNA damage was found for all MWCNT in THP-1a cells, and for short MWCNT in A549 cells. A concordance in genotoxicity of 83% was obtained between THP-1a cells and broncho-alveolar lavaged (BAL) cells. Conclusion This study shows correlations of pro-inflammatory potential in A549 and THP-1a cells with neutrophil influx in mice, and concordance in genotoxic response between THP-1a cells and BAL cells, for seven MWCNT.

Acclimation to tidal conditions alters the physiological responses of the green shore crab, Carcinus maenas to subsequent emersion

Animals inhabiting the intertidal zone are exposed to abrupt changes in environmental conditions associated with the rise and fall of the tide. For convenience, the majority of laboratory studies on intertidal organisms have acclimated individuals to permanently submerged conditions in seawater tanks. In this study, the green shore crab, Carcinus maenas was acclimated to either a simulated tidal regime of continuous emersion-immersion (‘tidal’) or to permanently submerged conditions (‘non-tidal’) to assess their physiological responses to subsequent emersion. Tidal crabs exhibited an endogenous rhythm of oxygen consumption during continuous submersion with lower oxygen consumption during periods of anticipated emersion, which was not detected in non-tidal crabs. During emersion, tidal crabs were able to buffer apparent changes in acid-base balance and exhibited no change in venous pH, whereas non-tidal crabs developed an acidosis associated with a rise in lactate levels. These results indicated that tidal crabs were better able to sustain aerobic metabolism and had lower metabolic costs during emersion than non-tidal crabs. It is likely that the elevated levels of haemocyanin exhibited by tidal crabs allowed them to maintain oxygen transport and buffer pH changes during emersion. This suggests that acclimation of C. maenas to submerged conditions results in a loss of important physiological mechanisms that enable it to tolerate emersion. The results of this study show that caution must be taken when acclimating intertidal organisms to submerged conditions in the laboratory, as it may abolish important physiological responses and adaptations that are critical to their performance when exposed to air.