Calculation of the Neutron Parameters for Accelerator-Driven Subcritical Reactors

In this paper, the accelerator-driven subcritical reactor (ADSR) is simulated based on structure of the TRIGA-Mark II reactor. A proton beam is accelerated and interacts on the lead target. Two cases of using lead are considered here: firstly, solid lead is referred to as spallation neutron target and water as the coolant; secondly, molten lead is considered both as a target and as a coolant. The proton beam in the energy range from 115 MeV to 2000 MeV interacts with the lead to create neutrons. The neutron parameters as neutron yield Yn/p, neutron multiplication factor k, the radial and axial distributions of the neutron flux in the core have been calculated by using MCNPX program. The results show that the neutron yield increases as the energies of the proton beam increases. When using the lead target, the differences between the neutron yield are from 4.2% to 14.2% depending on the energies of the proton beam. The proportion of uranium in the mixtures should be around 24% to produce an effective neutron multiplier factor greater than 0.9. The neutron fluxes are much higher than the same calculations for the TRIGA-Mark II reactor model using tungsten target and light water coolant.

Analyzing the Neutron Parameters in the Accelerator Driven Subcritical Reactor Using the Mixture of Molten Pb-Bi as Both Target and Coolant

In this paper, the Accelerator Driven Subcritical Reactor (ADSR) was simulated based on the structure of the TRIGA-Mark II reactor by the MCNPX program. The proton beam interacts on the Pb-Bi molten target with various energy levels from 0.5 GeV to 2.0 GeV. The important neutron parameters to evaluate the operability of ADSR were calculated as: the neutron yields according to various thicknesses of the target and according to the energy of the incident proton beam; the effective neutron multiplication factor for various fuel mixtures, along with its stability for some fuel mixtures; the axial and radial distributions of the neutron flux along with the height and radius of the core. The obtained results had shown a good agreement in using Pb-Bi molten as the interaction target and coolant for ADSR.

Preliminary Multi-Physics Performance Analysis and Design Evaluation of UO2 Fuel for LBE-Cooled Subcritical Reactor of China Initiative Accelerator Driven System

The China initiative Accelerator Driven System (CiADS) and the corresponding lead-bismuth eutectic (LBE) cooled subcritical reactor, as the research subject of one of the major national science and technology infrastructure projects, are undertaken by the Institute of Modern Physics-Chinese Academy of Sciences (IMP-CAS). And in the first phase, UO2 fuels will be loaded in the subcritical core to test the coupling technology and achieve a long-term steady operation. A brief description of CiADS subcritical reactor, fuel assembly and fuel element are presented here, and a multi-physics performance analysis and design evaluation of CiADS UO2 fuel are carried out by means of the FUTURE code. FUTURE is a fuel performance analysis code to evaluate the synergy of phenomena occurring in the fuel element and their impact on the fuel design improvement for the liquid metal fast reactor, which was developed jointly by IMP-CAS and Xi’an Jiaotong University (XJTU). In this paper, the FUTURE code was modified and updated focusing on characteristics of CiADS fuels. Relocation and densification models were added. Results of the hottest fuel element, mainly concerning the thermo-mechanical behaviors, are discussed concerning both fuel and cladding performance on the basis of indicative design limits. According to the preliminary design, the CiADS UO2 fuel exhibits good performance, and the main safety parameters are far below the indicative limits. The Fuel Cladding Mechanical Interaction (FCMI) is not very serious, and the permanent cladding strains and Cumulative Damage Fraction (CDF) are small and even negligible thanks to the low level of fuel temperature and corresponding stress. However, some critical issues may still exist, especially on LBE corrosion near the coolant inlet, where protective oxide layers are very thin from BoL to EoL. The modeling is useful for providing feedback to the conceptual design of the CiADS LBE-cooled subcritical reactor and the update of FUTURE code.

Simulation of transients in ads reactors in three-dimensional geometry

Accelerator-Driven System, ADS, belong to the new generation of advanced reactors being developed that promise to drastically reduce the life of radioactive waste by, for example, the transmutation process. Subcritical reactor designs of the ADS type have attracted worldwide attention and are the subject of research and development in several countries. The purpose of this work is to simulate transients associated with ADS. It adopted the neutron diffusion model that leads the spatial kinetics equations. These equations are solved by the known numerical method of finite differences. The simulations are performed considering transients related to the variations in the intensity of the proton flux provided by the particle accelerator acting in a sub-critical reactor in three-dimensional geometry for two energy groups and six groups of delayed neutron precursors.

Dynamic Characteristics of Accelerator-Driven Subcritical Reactor With Self-Adapting Multi-Mode Core Few-Group Constants

In this study, the dynamic characteristics of accelerator-driven subcritical reactor (ADSR) under beam transients with high heterogeneity of neutron flux in time-space are investigated. Multi-mode core few-group constants are generated by three kinds of neutron fluxes: steady state of ADSR, λ-eigenvalue fundamental wave, and α-eigenvalue fundamental wave. The proposed few-group constants overcome the limitation of single few-group constant generated by two-step method that cannot consider the variation in neutron flux density and neutron energy spectrum with time and space. Compared to the existing few-group constants generated by two-step method under different operating conditions, the self-adapting multi-mode core few-group constants exhibit higher accuracy in the case of following two modes: steady-state mode of ADSR in the starting process and λ-eigenvalue mode in the beam trip condition. Overall, this research provides useful insights on neutron kinetics and can boost the development of ADSRs.

EXPERIMENTAL STUDY ON NEUTRON CORRELATION ANALYSIS FOR A SUBCRITICAL SYSTEM DRIVEN BY A PULSED SPALLATION NEUTRON SOURCE IN KUCA

The Feynman-α and the Rossi-α methods have been frequently employed to determine the subcriticality of subcritical reactor systems driven by Poisson source such as Am-Be neutron source. In actual accelerator-driven systems (ADS), a spallation device will be applied as an intense neutron source. This device will be probably operated in a pulse mode and it is impossible to apply a conventional analysis method to determine the subcriticality in any ADS. In previous theoretical studies, some advanced formulae of neutron correlation analysis for spallation neutron source have been presented. However, the experimental study has been hardly reported to date. The major objectives of this study are to examine experimentally an applicability of these complicated formulae to a subcritical reactor system driven by an actual pulsed spallation neutron source and to determine the prompt-neutron decay constant α of the system. To achieve these goals, we constructed an ADS core at the Kyoto University Critical Assembly (KUCA). The core was composed of highly-enriched uranium fuel assemblies surrounded by many polyethylene reflector assemblies. We carried out a series of the Feynman-α and the Rossi-α analyses for the system driven by pulsed spallation source. As a result, the prompt-neutron decay constants were experimentally obtained by using a fitting formula. The prompt-neutron decay constants determined by Feynman-α and Rossi-α analyses agrees with each other within a statistical error range of least-squares fitting.