Embedded fuzzy controller for water level control

This article presents the design of a fuzzy controller embedded in a microcontroller aimed at implementing a low-cost, modular process control system. The fuzzy system's construction is based on a classical proportional and derivative controller, where inputs of error and its derivate depend on the difference between the desired setpoint and the actual level; the goal is to control the water level of coupled tanks. The process is oriented to control based on the knowledge that facilitates the adjustment of the output variable without complex mathematical modeling. In different response tests of the fuzzy controller, a maximum over-impulse greater than 8% or a steady-state error greater than 2.1% was not evidenced when varying the setpoint.

Effects of Response Option Order on Likert-Type Psychometric Properties and Reactions

The effects of different response option orders on survey responses have been studied extensively. The typical research design involves examining the differences in response characteristics between conditions with the same item stems and response option orders that differ in valence—either incrementally arranged (e.g., strongly disagree to strongly agree) or decrementally arranged (e.g., strongly agree to strongly disagree). The present study added two additional experimental conditions—randomly incremental or decremental and completely randomized. All items were presented in an item-by-item format. We also extended previous studies by including an examination of response option order effects on: careless responding, correlations between focal predictors and criteria, and participant reactions, all the while controlling for false discovery rate and focusing on the size of effects. In a sample of 1,198 university students, we found little to no response option order effects on a recognized personality assessment vis-à-vis measurement equivalence, scale mean differences, item-level distributions, or participant reactions. However, the completely randomized response option order condition differed on several careless responding indices suggesting avenues for future research.

Biochemical Characterization, Antifungal Activity, and Relative Gene Expression of Two Mentha Essential Oils Controlling Fusarium oxysporum, the Causal Agent of Lycopersicon esculentum Root Rot

Tomato (Lycopersicon esculentum Mill.) is important food in daily human diets. Root rot disease by Fusarium oxysporum caused huge losses in tomato quality and yield annually. The extensive use of synthetic and chemical fungicides has environmental risks and health problems. Recent studies have pointed out the use of medicinal plant essential oils (EOs) and extracts for controlling fungal diseases. In the current research, Mentha spicata and Mentha longifolia EOs were used in different concentrations to control F. oxysporum. Many active compounds are present in these two EOs such as: thymol, adapic acid, menthol and menthyl acetate. These compounds possess antifungal effect through malformation and degradation of the fungal cell wall. The relative expression levels of distinctly upregulated defense-related WRKY genes (WRKY1, WRKY4, WRKY33 and WRKY53) in seedling root were evaluated as a plant-specific transcription factor (TF) group in different response pathways of abiotic stress. Results showed significant expression levels of WRKY, WRKY53, WRKY33, WRKY1 and WRKY4 genes. An upregulation was observed in defense-related genes such as chitinase and defensin in roots by application EOs under pathogen condition. In conclusion, M. spicata and M. longifolia EOs can be used effectively to control this plant pathogen as sustainable and eco-friendly botanical fungicides.

Economic literacy among beginning higher education economics students in Japan and Germany and its socio-demographic influencing factors

In view of cross-national student mobility and increasing internationalization of the labor market, a common understanding of economic concepts as well as awareness for country-specific factors influencing economics education is essential. Therefore, the development of instruments that allow for comparable investigation across countries is crucial. The present study describes economic education in Japan and Germany and explores the specific conditions for access to higher education in each country. On this basis, we examine the level of economic literacy (using TEL-IV) at the beginning of higher education among 232 German and 198 Japanese students of Business & Economics and the impact of personal influencing factors thereon. Overall, comparable entry levels can be observed, whereby each student group shows different response patterns. Predicting economic literacy, primarily gender and interest reach significance. A final outlook regarding the significance of cross-national studies is given, taking limitations and implications of this study into account.

Fluid and Structure Analysis of Wind Turbine Blade with Winglet

One of the succeeded methods to enhance the performance of horizontal axis wind turbine (HAWT) is an attaching a winglet to the blades tip. The current paper study the effect of four key parameters that are used to describe the winglet on the performance of wind turbine which are winglet height H%R, cant angle θ, twist angle β, and taper ratio Λ. A five design cases for each geometric parameters were numerically investigated using computational fluid dynamics (CFD) by ANSYS18.1 software, which totally give a twenty different response. A validation of present computational model with reference experimental results successfully carried out with maximum inconsistency of 3%. A mathematical correlation was established from the CFD results and being used in predicting the turbine power for the different winglet geometric parameters. From CFD and mathematical correlation response, the effect of H and θ were greater than β and Λ on the turbine power. The epoxy E-glass unidirectional material was selected for current study to investigate the effect of winglet on blade structure. The power increases by 2% to 30% due to adding winglet to a wind turbine blade. The maximum power increment corresponds to the design case of W6 with H= 8%R, =30°, β = 3°, and Λ = 0.8. Form the structural analysis the addition of winglet changes the stress distribution over the blade, increasing stresses at the blade root, and achieved the transfer of the maximum deformation from the blade tip to the winglet tip.

Measuring Seclusion in Psychiatric Intensive Care: Development and Measurement Properties of the Clinical Seclusion Checklist

Background: Acute psychiatric units in general hospitals must ensure that acutely disturbed patients do not harm themselves or others, and simultaneously provide care and treatment and help patients regain control of their behavior. This led to the development of strategies for the seclusion of a patient in this state within a particular area separated from other patients in the ward. While versions of this practice have been used in different countries and settings, a systematic framework for describing the various parameters and types of seclusion interventions has not been available. The aims of the project were to develop and test a valid and reliable checklist for characterizing seclusion in inpatient psychiatric care.Methods: Development and testing of the checklist were accomplished in five stages. Staff in psychiatric units completed detailed descriptions of seclusion episodes. Elements of seclusion were identified by thematic analysis of this material, and consensus regarding these elements was achieved through a Delphi process comprising two rounds. Good content validity was ensured through the sample of seclusion episodes and the representative participants in the Delphi process. The first draft of the checklist was revised based on testing by clinicians assessing seclusion episodes. The revised checklist with six reasons for and 10 elements of seclusion was tested with different response scales, and acceptable interrater reliability was achieved.Results: The Clinical Seclusion Checklist is a brief and feasible tool measuring six reasons for seclusion, 10 elements of seclusion, and four contextual factors. It was developed through a transparent process and exhibited good content validity and acceptable interrater reliability.Conclusion: The checklist is a step toward achieving valid and clinically relevant measurements of seclusion. Its use in psychiatric units may contribute to quality assurance, more reliable statistics and comparisons across sites and periods, improved research on patients' experiences of seclusion and its effects, reduction of negative consequences of seclusion, and improvement of psychiatric intensive care.

Congenital hypothalamic hypogonadism — a Kallmann syndrome in boys. Clinical cases

Central hypogonadism (CH) is a rare disease that occurs with a frequency of 1 : 8000 in women and 1 : 4000 in men. In 60 % of cases of CH, it is caused by Kallmann syndrome (KS) — a disease in which hypogonadotropic hypogonadism is combined with olfactory disorders (hyposmia or anosmia).Aim — to study clinical features, principles of diagnosis of CH/KS and evaluation of the effectiveness of various treatment. Materials and methods. 4 cases with CH/KS from three families had been described. Laboratory and instrumental investigations were used to confirm the KS; genetic diagnosis was performed using targeted next-generation sequencing (tNGS hypogonadotropic panel).Results. Patients with CH/KS had a wide spectrum of genital disorders (micropenia, cryptorchidism, microorchidism), which appeared at different age. Extragenital pathology was found in three of four patients: namely disorders of kidney, eye, respiratory system, hypoparathyroidism, hypothyroidism and epilepsy. It should be noted that all patients had olfactory disorders, which appeared in two of them only during a detailed survey after receiving genetic testing. In all patients, the diagnosis of CH was confirmed by the test with triptorelin 0.1. Also, all patients who underwent densitometry were found to have significant osteoporosis. In three patients, genetic testing confirmed hemizygous pathogenic variants in ANOS1 gene, while in one patient a heterozygous variant in FGFR1 gene was confirmed. After treatment with chorionic gonadotropin (HCG), two patients responded positively, with a descent of the testicles into the scrotum and an increase of testosterone level and testicular volume. However, in the other two patients there was no positive trend in treatment with HCG, therefore, the use of recombinant human FSH (r-FSH) in the form of priming and then further — in combination with HCG may be considered. Although the presence of severe microorchidism, cryptorchidism, low levels of AMH, inhibin B, and an unsatisfactory response to the previous treatment with HCG indicates extremely unfavorable prognosis. Therefore, in order to achieve the fertility in some patients with CH/KS, the most likely attempt is the use of assisted reproductive technologies.Conclusions. The leading problem in the treatment of patients with KS is their different response to hormone therapy, including different manifestations of the disease.

A Novel Machine-Assisted Technique for Extracting Multiscale Vugs and Fractures in Heterogeneous Carbonates Sequence

Predicting petrophysical properties in carbonate reservoirs is challenging due to the deposition and diagenetic history, which creates pore-scale features and heterogeneity at multiple-length scale. Non-fractured carbonate rocks with monomodal pore distribution often provide weak transportation properties compared to carbonates with multimodal pore system. The behaviour of such formations is subject to percolation effect where the connectivity of vug clusters control the poro-perm relationship which can be explained with high-resolution microresistivity images and nuclear magnetic resonance (NMR) data. A machine-assisted processing technique, defined as "thresholding," was applied to high-resolution microresistivity images, resolving vugs and fractures with similar resistivity. Other objects of interest are removed using object-oriented filters and thresholding, resulting in a "sculptured image" containing only vugs and fractures. The image is analysed to quantify formation porosity. A Laplacian of Gaussian filter is used to avoid highlighting features of no interest. Step two analyses T1 and T2 relaxations allowing portions of signal from a pore-size group to spill across the discrete boundaries. The pore-size takes on a fuzziness near the discrete relaxation time cut-offs corresponding to pore radii breakover points. High poro-perm layers of grainstone in overall thinly bedded sequences of packstone and wackestone were successfully identified and subsequently shed light upon the ambiguities observed in mobility values obtained from formation tester across the same lithocolumn. This novel technology helps in deciphering high-resolution integrated lithofacies. The histogram from the image porosity binning demonstrates a different response within vugular zones compared to fractured zones. Where the vugs sizes are variable, they exhibit a multi-pore system nature in NMR. For the fractured interval, the images and NMR exhibit weak distribution. The resistivity independent image pixel-based filtration technique helps to define interesting features on images which can be enhanced and measurable at various scales. Machine assisted technique in NMR complement the results in aiding to characterize the heterogeneous carbonate rocks.