An approach for cross-modality guided quality enhancement of liver image

<p><span>A novel approach for multimodal liver image contrast enhancement is put forward in this paper. The proposed approach utilizes magnetic resonance imaging (MRI) scan of liver as a guide to enhance the structures of computed tomography (CT) liver. The enhancement process consists of two phases: The first phase is the transformation of MRI and CT modalities to be in the same range. Then the histogram of CT liver is adjusted to match the histogram of MRI. In the second phase, an adaptive histogram equalization technique is presented by splitting the CT histogram into two sub-histograms and replacing their cumulative distribution functions with two smooths sigmoid. The subjective and objective assessments of experimental results indicated that the proposed approach yields better results. In addition, the image contrast is effectively enhanced as well as the mean brightness and details are well preserved.</span></p>

An integrated multiple layer perceptron-genetic algorithm decision support system for photovoltaic power plant site selection

There is a need for non-renewable energy sources in generation of power for almost every domestic and commercial purposes. This source of energy helps in the development of a country. Because of the increasing usage of the fossil fuels and depletion of these resources, our focus has been shifted towards the renewable sources of energy like solar, water and wind. Therefore, in the present scenario, the usage of renewable sources has been increasing rapidly. Selection of a solar power plant (SPP) requires environmental factor, local terrain, and local weather issues. Thus, a large amount of investment is required for installation. Multi-criteria decision making (MCDM) is a method that identifies one in choosing the best sites among the other proposed options. This paper gives a detailed study of optimal ranking of SPP site using analytical hierarchy process (AHP), multiple layer perceptron (MLP) neural network trained with back propagation (BP) algorithm and genetic algorithm (GA). Three SPP sites of India were considered and various important criteria like local weather, geographical location, and environmental factors are included in our study as SPP site selection is a multi-criteria problem. A precise comparison of these three methods is listed in this paper.

Predicting the technical condition of the power transformer using fuzzy logic and dissolved gas analysis method

Power transformers are one of the most important and complex parts of an electric power system. Maintenance is performed for this responsible part based on the technical condition of the transformer using a predictive approach. The technical condition of the power transformer can be diagnosed using a range of different diagnostic methods, for example, analysis of dissolved gases (DGA), partial discharge monitoring, vibration monitoring, and moisture monitoring. In this paper, the authors present a digital model for predicting the technical condition of a power transformer and determining the type of defect and its cause in the event of defect detection. The predictive digital model is developed using the programming environment in LabVIEW and is based on the fuzzy logic approach to the DGA method, interpreted by the key gas method and the Dornenburg ratio method. The developed digital model is verified on a set of 110 kV and 220 kV transformers of one of the sections of the distribution network and thermal power plant in the Russian Federation. The results obtained showed its high efficiency in predicting faults and the possibility of using it as an effective computing tool to facilitate the work of the operating personnel of power enterprises.

Features selection by genetic algorithm optimization with k-nearest neighbour and learning ensemble to predict Parkinson disease

<span lang="EN-US">Among the several ways followed for detecting Parkinson's disease, there is the one based on the speech signal, which is a symptom of this disease. In this paper focusing on the signal analysis, a data of voice records has been used. In these records, the patients were asked to utter vowels “a”, “o”, and “u”. Discrete wavelet transforms (DWT) applied to the speech signal to fetch the variable resolution that could hide the most important information about the patients. From the approximation a3 obtained by Daubechies wavelet at the scale 2 level 3, 21 features have been extracted: a <a name="_Hlk88480766"></a>linear predictive coding (LPC), energy, zero-crossing rate (ZCR), mel frequency cepstral coefficient (MFCC), and wavelet Shannon entropy. Then for the classification, the K-nearest neighbour (KNN) has been used. The KNN is a type of instance-based learning that can make a decision based on approximated local functions, besides the ensemble learning. However, through the learning process, the choice of the training features can have a significant impact on overall the process. So, here it stands out the role of the genetic algorithm (GA) to select the best training features that give the best accurate classification.</span>

Renewable energy allocation based on maximum flow modelling within a microgrid

This paper designs an energy allocation scheme based on maximum flow modeling for a microgrid containing renewable energy generators and consumer facilities. Basically, the flow graph consists of a set of nodes representing consumers or generators as well as a set of weighted links representing the amount of energy generation, consumer-side demand, and transmission cable capacity. The main idea lies in that a special node is added to account for the interaction with the main grid and that two-pass allocation is executed. In the first pass, the maximum flow solver decides the amount of the insufficiency and thus how much to purchase from the main grid. The second pass runs the flow solver again to fill the energy lack and calculates the surplus of renewable energy generation. The performance measurement result obtained from a prototype implementation shows that the generated energy is stably distributed over multiple consumers until the energy generation reaches the maximum link capacity.

Evaluation of the carotid artery using wavelet-based analysis of the pulse wave signal

<p>The use of pulse wave analysis may assist cardiologists in diagnosing patients with vascular diseases. However, it is not common in clinical practice to interpret and analyze pulse wave data and utilize them to detect the abnormalities of the signal. This paper presents a novel approach to the clinical application of pulse waveform analysis using the wavelet technique by decomposing the normal and pathology signal into many levels. The discrete wavelet transform (DWT) decomposes the carotid arterial pulse wave (CAPW) signal, and the continuous wavelet transform (CWT) creates images of the decomposed signal. The wavelet analysis technique in this work aims to strengthen the medical benefits of the pulse wave. The obtained results show a clear difference between the signal and the images of the arterial pathologies in comparison with normal ones. The certain distinct that were achieved are promising but further improvement may be required in the future.</p>

Enhanced dynamic performance of grid feeding distributed generation under variable grid inductance

<p>Controlling weak grid-connected systems is very challenging. In transient, frequency and voltage oscillations may lead to voltage and/or frequency stability problems and finally lead to system collapse. During steady-state operation and at the point of common coupling (PCC), voltage degradation and grid voltage background harmonics restrict the inverter's functionality, reduce the power flow capability and cause poor power quality. With weak grid connection, grid impedance variance will contaminate the voltage waveform by harmonics and augment the resonance, destabilizing the inverter operation. In this paper, complete mathematical modeling is carried out and state feedback-plus-integral control is implemented to support the stabilization of the system. The proposed controller is adopted to provide a smooth transient under sudden load change by controlling the injected grid current under different grid inductance values. Furthermore, the proposed control is used to reduce the order and size of the inverter output filter while maintaining system stability. The proposed control has been compared with the conventional proportional integral (PI) controller under different scenarios to validate its effectiveness and to strengthen its implementation as a simple controller for distributed generator applications.</p>

Computed tomography scans image processing for nasal symptoms severity prediction

This paper aims to use a new technique of computed tomography (CT) scan image processing to correlate the image analysis with sinonasal symptoms. A retrospective cross-sectional study is conducted by analyzing the digital records of 50 patients who attended the ear, nose and throat (ENT) clinics at King Abdullah University Hospital, Jordan. The coronal plane CT scans are analyzed using our developed software. The purposes of this software are to calculate the surface area of the nasal passage at three different levels visible on coronal plane CT scans: i) the head of the inferior turbinate, ii) the head of the middle turbinate, and iii) the tail of the inferior turbinate. We employ image processing techniques to correlate the narrowing of nasal surface area with sinonasal symptoms. As a consequence, obstruction in the first level is correlated significantly with the symptoms of nasal obstruction while the narrowing in the second level is related to frontal headache. No other significant correlations are found with nasal symptoms at the third level. In our study, we find that image processing techniques can be very useful to predict the severity of common nasal symptoms and they can be used to suggest treatment and to follow up on the case progression.

Simulation and performance assessment of a modified throttled load balancing algorithm in cloud computing environment

<span lang="EN-US">Load balancing is crucial to ensure scalability, reliability, minimize response time, and processing time and maximize resource utilization in cloud computing. However, the load fluctuation accompanied with the distribution of a huge number of requests among a set of virtual machines (VMs) is challenging and needs effective and practical load balancers. In this work, a two listed throttled load balancer (TLT-LB) algorithm is proposed and further simulated using the CloudAnalyst simulator. The TLT-LB algorithm is based on the modification of the conventional TLB algorithm to improve the distribution of the tasks between different VMs. The performance of the TLT-LB algorithm compared to the TLB, round robin (RR), and active monitoring load balancer (AMLB) algorithms has been evaluated using two different configurations. Interestingly, the TLT-LB significantly balances the load between the VMs by reducing the loading gap between the heaviest loaded and the lightest loaded VMs to be 6.45% compared to 68.55% for the TLB and AMLB algorithms. Furthermore, the TLT-LB algorithm considerably reduces the average response time and processing time compared to the TLB, RR, and AMLB algorithms.</span>

Adaptive backstepping control for ship nonlinear active fin system based on disturbance observer and neural network

<span>Adaptive backstepping control based on disturbance observer and neural network for ship nonlinear active fin system is proposed. One disturbance observer is given to observe the disturbances of the system, by this way, the response time is shorten and the negative impact of disturbance and uncertain elements of the system is reduced. In addition, radial basic function neural network (RBFNN) is proposed to approach the unknown elements in the ship nonlinear active fin system, therefor the system can obtain good roll reduction effectiveness and overcome the uncertainties of the model, the designed controller can maintain the ship roll angle at desired value. Finally, the simulation results are given for a supply vessel to verify the successfulness of the proposed controller.</span>