Design and microstructural development of a new eutectic Fe-Co-Ni-B multi-principal element alloy system

2021 ◽  
pp. 163205
Author(s):  
Caixia Shan ◽  
Zheng Chen ◽  
Rujiang Wang ◽  
Meng Liu ◽  
Lixin Zhao ◽  
...  
Keyword(s):  
Alloy System ◽  
Microstructural Development ◽  
Principal Element

scholarly journals A Focused Review on Engineering Application of Multi-Principal Element Alloy

2022 ◽  
Vol 8 ◽  
Author(s):  
Yang Chen ◽  
Baobin Xie ◽  
Bin Liu ◽  
Yuankui Cao ◽  
Jia Li ◽  
...  
Keyword(s):  
Future Development ◽  
Engineering Application ◽  
Principal Component ◽  
Alloy System ◽  
Development Trend ◽  
Physical Metallurgy ◽  
National Defense ◽  
Industrial Equipment ◽  
Principal Element ◽  
Potential Applications

Compared with traditional alloys with one principal component up to 40–90%, multi-principal element alloys (MPEAs) were born in the complicated intermingling of traditional and non-traditional physical metallurgy, and brings us a great amount of excellent performances. Here, we would briefly summarize the potential applications in some key areas, which is helpful for latecomers to quickly and comprehensively understand this new alloy system. Especially, the applications of MPEAs in aerospace, industrial equipment, national defense, energy, navigation and so on are discussed roughly. Subsequently, several emerging areas have also been compared. Finally, some suggestions are given for the future development trend.

The Study about Microstructure Characterization of AlCoCrTiNiCu_x High Entropy Alloy System with Multi-Principal Element

2011 ◽  
Vol 399-401 ◽  
pp. 3-7 ◽  
Author(s):  
Chun Wei Wang ◽  
Zhuo Qiang Mo ◽  
Jian Jiang Tang
Keyword(s):  
Crystal Structure ◽  
Transition Metal ◽  
Change Process ◽  
Phase Structure ◽  
Alloy System ◽  
High Entropy Alloy ◽  
Principal Element ◽  
High Entropy ◽  
Metal Elements

The microstructure and phase structure of AlCoCrTiNiCu_x which are made of six class transition metal elements have been studied in this paper. The results indicated that the change process of microcosmic crystal-structure of the five group high entropy alloy of AlCoCrTiNiCu_x system is transformed from FCC（mainly）+ BCC crystal structure (X=0.5、X=0.8) to FCC+BCC+ primary lattice crystal structure (X=1.0、X=1.2), finally, the crystal-structure turn into BCC+ primary lattice crystal structure as the content of Cu further increasing.

Competition between elements during mechanical alloying in an octonary multi-principal-element alloy system

2009 ◽  
Vol 481 (1-2) ◽  
pp. 768-775 ◽  
Author(s):  
Yu-Liang Chen ◽  
Ya-Huei Hu ◽  
Cheng-An Hsieh ◽  
Jien-Wei Yeh ◽  
Swe-Kai Chen
Keyword(s):  
Mechanical Alloying ◽  
Alloy System ◽  
Principal Element

Deviations from Ideal Decagonal Symmetry in Electron Diffraction Patterns of the “Decagonal” Phase in the Al-Co-Cu Alloy System

1991 ◽  
Vol 49 ◽  
pp. 914-915
Author(s):  
Atul S. Ramani ◽  
Earle R. Ryba ◽  
Paul R. Howell
Keyword(s):  
Electron Microscope ◽  
Alloy System ◽  
Nominal Composition ◽  
Dimensional Lattice ◽  
3 Dimensional ◽  
Decagonal Phase ◽  
Cu Alloy ◽  
Transmission Electron ◽  
Lattice Periodicity ◽  
Diffraction Patterns

The “decagonal” phase in the Al-Co-Cu system of nominal composition Al65CO15Cu20 first discovered by He et al. is especially suitable as a topic of investigation since it has been claimed that it is thermodynamically stable and is reported to be periodic in the dimension perpendicular to the plane of quasiperiodic 10-fold symmetry. It can thus be expected that it is an important link between fully periodic and fully quasiperiodic phases. In the present paper, we report important findings of our transmission electron microscope (TEM) study that concern deviations from ideal decagonal symmetry of selected area diffraction patterns (SADPs) obtained from several “decagonal” phase crystals and also observation of a lattice of main reflections on the 10-fold and 2-fold SADPs that implies complete 3-dimensional lattice periodicity and the fundamentally incommensurate nature of the “decagonal” phase. We also present diffraction evidence for a new transition phase that can be classified as being one-dimensionally quasiperiodic if the lattice of main reflections is ignored.

An atomic resolution study of a carbide phase in platinum

1992 ◽  
Vol 50 (1) ◽  
pp. 20-21
Author(s):  
M.J. Witcomb ◽  
M.A. O'Keefe ◽  
CJ. Echer ◽  
C. Nelson ◽  
J.H. Turner ◽  
...  
Keyword(s):  
Solid Solution ◽  
Carbon Atom ◽  
Carbide Phase ◽  
Structural Changes ◽  
Critical Role ◽  
Alloy System ◽  
Atomic Resolution ◽  
Excess Carbon ◽  
Interstitial Carbon ◽  
Resolution Study

Under normal circumstances, Pt dissolves only a very small amount of interstitial carbon in solid solution. Even so, an appropriate quench/age treatment leads to the formation of stable Pt2C {100} plate precipitates. Excess (quenched-in) vacancies play a critical role in the process by accommodating the volume and structural changes that accompany the transformation. This alloy system exhibits other interesting properties. Due to a large vacancy/carbon atom binding energy, Pt can absorb excess carbon at high temperatures in a carburizing atmosphere. In regions rich in carbon and vacancies, another carbide phase, Pt7C which undergoes an order-disorder reaction was formed. The present study of Pt carburized at 1160°C and aged at 515°C shows that other carbides in the PtxC series can be produced.

Lattice imaging of precipitates in Al-Zn-Mg alloy

1986 ◽  
Vol 44 ◽  
pp. 412-413
Author(s):  
C. K. Wu
Keyword(s):  
Grain Boundaries ◽  
Homogeneous Nucleation ◽  
Alloy System ◽  
Mg Alloy ◽  
List Type ◽  
Lattice Structures ◽  
Type Number ◽  
Orientation Relationships ◽  
Lattice Imaging ◽  
The Matrix

The precipitation phenomenon in Al-Zn-Mg alloy is quite interesting and complicated and can be described in the following categories:(i) heterogeneous nucleation at grain boundaries;(ii) precipitate-free-zones (PFZ) adjacent to the grain boundaries;(iii) homogeneous nucleation of snherical G.P. zones, n' and n phases inside the grains. The spherical G.P. zones are coherent with the matrix, whereas the n' and n phases are incoherent. It is noticed that n' and n phases exhibit plate-like morpholoay with several orientation relationship with the matrix. The high resolution lattice imaging techninue of TEM is then applied to study precipitates in this alloy system. It reveals the characteristics of lattice structures of each phase and the orientation relationships with the matrix.

Microstructural Development in Nb-Ti Multifilamentary Superconductors During Processing

1985 ◽  
Vol 43 ◽  
pp. 190-191
Author(s):  
A. W. West
Keyword(s):  
Heat Treatment ◽  
Critical Current Density ◽  
Copper Matrix ◽  
Wire Drawing ◽  
Heat Treatments ◽  
Microstructural Development ◽  
Final Size ◽  
Density Values ◽  
The Wire ◽  
Multifilamentary Superconductors

The influence of the filament microstructure on the critical current density values, Jc, of Nb-Ti multifilamentary superconducting composites has been well documented. However the development of these microstructures during composite processing is still under investigation.During manufacture, the multifilamentary composite is given several heat treatments interspersed in the wire-drawing schedule. Typically, these heat treatments are for 5 to 80 hours at temperatures between 523 and 573K. A short heat treatment of approximately 3 hours at 573K is usually given to the wire at final size. Originally this heat treatment was given to soften the copper matrix, but recent work has shown that it can markedly change both the Jc value and microstructure of the composite.

Processing and characterization of YBa2Cu3O7−x/Ag composites

1990 ◽  
Vol 48 (4) ◽  
pp. 46-47
Author(s):  
Jafar Javadpour ◽  
Bradley L. Thiel ◽  
Sarikaya Mehmet ◽  
Ilhan A. Aksay
Keyword(s):  
Composite System ◽  
Precursor Solution ◽  
Microstructural Development ◽  
Superconducting Properties ◽  
Practical Applications ◽  
Nitrate Precursor ◽  
Cold Pressed ◽  
Tape Cast ◽  
Composite Samples

Practical applications of bulk YBa2Cu3O7−x materials have been limited because of their inadequate critical current density (jc) and poor mechanical properties. Several recent reports have indicated that the addition of Ag to the YBa2Cu3O7−x system is beneficial in improving both mechanical and superconducting properties. However, detailed studies concerning the effect of Ag on the microstructural development of the cermet system have been lacking. Here, we present some observations on the microstructural evolution in the YBa2Cu3O7−x/Ag composite system.The composite samples were prepared by mixing various amounts (2.5 - 50 wt%) AgNO3 in the YBa2Cu3O7−x nitrate precursor solution. These solutions were then spray dried and the resulting powders were either cold pressed or tape cast. The microstructures of the sintered samples were analyzed using SEM (Philips 515) and an analytical TEM (Philips 430T).The SEM micrographs of the compacts with 2.5 and 50 wt% Ag addition sintered at 915°C (below the melting point of Ag) for 1 h in air are displayed in Figs. 1 and 2, respectively.

An analysis of the transport properties and mechanical stability of rapidly solidified Al-Sb alloy

2015 ◽  
Vol 10 (2) ◽  
pp. 2663-2681
Author(s):  
Rizk El- Sayed ◽  
Mustafa Kamal ◽  
Abu-Bakr El-Bediwi ◽  
Qutaiba Rasheed Solaiman
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Melt Spinning ◽  
Elastic Moduli ◽  
Mechanical Stability ◽  
Microstructural Analysis ◽  
Alloy System ◽  
Antimony Content ◽  
The Stability ◽  
Rapidly Solidified

The structure of a series of AlSb alloys prepared by melt spinning have been studied in the as melt–spun ribbons  as a function of antimony content .The stability  of these structures has  been  related to that of the transport and mechanical properties of the alloy ribbons. Microstructural analysis was performed and it was found that only Al and AlSb phases formed for different composition.  The electrical, thermal and the stability of the mechanical properties are related indirectly through the influence of the antimony content. The results are interpreted in terms of the phase change occurring to alloy system. Electrical resistivity, thermal conductivity, elastic moduli and the values of microhardness are found to be more sensitive than the internal friction to the phase changes. 

Sign in / Sign up

Export Citation Format

Share Document