One Step Further: Tunable and Explainable Throughput Prediction based on Large-scale Commercial Networks

2021 ◽  
Author(s):  
Roman Zhohov ◽  
Alexandros Palaios ◽  
Philipp Geuer
Keyword(s):  
Large Scale ◽  
Commercial Networks ◽  
One Step

A Simple Synthesis of the Anticancer Drug Altretamine

2020 ◽  
Vol 17 (8) ◽  
pp. 628-630
Author(s):  
Vu Binh Duong ◽  
Pham Van Hien ◽  
Tran Thai Ngoc ◽  
Phan Dinh Chau ◽  
Tran Khac Vu
Keyword(s):  
Aqueous Solution ◽  
Anticancer Drug ◽  
Potassium Hydroxide ◽  
Large Scale ◽  
Synthesis Method ◽  
Practical Method ◽  
Cyanuric Chloride ◽  
Simple Synthesis ◽  
High Yield ◽  
One Step

A simple and practical method for the synthesis on a large scale of altretamine (1), a wellknown antitumor drug, has been successfully developed. The synthesis method involves the conversion of cyanuric chloride (2) into altretamine (1) by dimethylamination of 2 with an aqueous solution of 40% dimethylamine and potassium hydroxide in 1, -dioxan 4in one step to give altretamine (1) in high yield.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

Global Reaction Model to Describe the Kinetics of Catalytic Pyrolysis of Coffee Grounds Waste

2017 ◽  
Vol 899 ◽  
pp. 173-178 ◽  
Author(s):  
Ronydes Batista Jr. ◽  
Bruna Sene Alves Araújo ◽  
Pedro Ivo Brandão e Melo Franco ◽  
Beatriz Cristina Silvério ◽  
Sandra Cristina Danta ◽  
...  
Keyword(s):  
Thermal Decomposition ◽  
Large Scale ◽  
Catalytic Pyrolysis ◽  
Petroleum Products ◽  
Reaction Model ◽  
Heating Rates ◽  
Coffee Grounds ◽  
One Step ◽  
Global Reaction ◽  
The One

In view of the constant search for new sources of renewable energy, the particulate agro-industrial waste reuse emerges as an advantageous alternative. However, despite the advantages of using the biomass as an energy source, there is still strong resistance as the large-scale replacement of petroleum products due to the lack of scientifically proven efficient conversion technologies. In this context, the pyrolysis is presented as one of the most widely used thermal decomposition processes. The knowledge of aspects of chemical kinetics, thermodynamics these will, heat and mass transfer, are so important, since influence the quality of the product. This paper presents a kinetic study of slow pyrolysis of coffee grounds waste from dynamic thermogravimetric experiments (TG), using different powder catalysts. The primary thermal decomposition was described by the one-step reaction model, which considers a single global reaction. The kinetic parameters were estimated using nonlinear regression and the differential evolution method. The coffee ground waste was dried at 105°C for 24 hours. The sample in nature was analyzed at different heating rates, being 10, 15, 20, 30 and 50 K/min. In the catalytic pyrolysis, about 5% (w/w) of catalyst were added to the sample, at a heating rate of 30 K/min. The results show that the one-step model does not accurately represent the data of weight loss (TG) and its derivative (DTG), but can do an estimative of the activation energy reaction, and can show the differences caused by the catalysts. Although no one can say anything about the products formed with the addition of the catalyst, it would be necessary to micro-pyrolysis analysis, we can say the influence of the catalyst in the samples, based on the data obtained in thermogravimetric tests.

One-Step Synthesis and Isolation of N-(tert-Butoxycarbonyl)-N′-methylthiourea on a Large Scale

2008 ◽  
Vol 38 (21) ◽  
pp. 3834-3839 ◽  
Author(s):  
Teresa Andreani ◽  
Yan Jin ◽  
Jianshe Kong ◽  
Xian Liang ◽  
Tao Meng ◽  
...  
Keyword(s):  
Large Scale ◽  
One Step

One-step Functionalization of Mildly and Strongly Reduced Graphene Oxide with Maleimide: An Experimental and Theoretical Investigation of the Diels-Alder [4+2] Cycloaddition Reaction

2021 ◽  
Author(s):  
Alfonso Ferretti ◽  
Sourab Sinha ◽  
Luca Sagresti ◽  
Esteban Araya-Hermosilla ◽  
Mirko Prato ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Large Scale ◽  
Cycloaddition Reaction ◽  
Diels Alder ◽  
Reduced Form ◽  
Graphene Nanocomposites ◽  
Exfoliated Graphene ◽  
Reduced Graphene ◽  
One Step

For large-scale graphene applications, such as the production of polymer-graphene nanocomposites, exfoliated graphene oxide (GO) and its reduced form (rGO) are presently considered very suitable starting material, showing enhanced chemical...

The Emergence of Bone Technologies at the End of the Pleistocene in Southeast Asia: Regional and Evolutionary Implications

2012 ◽  
Vol 22 (1) ◽  
pp. 37-56 ◽  
Author(s):  
Ryan J. Rabett ◽  
Philip J. Piper
Keyword(s):  
Early Modern ◽  
Large Scale ◽  
Minor Component ◽  
Modern Human ◽  
Small Element ◽  
Adaptive Process ◽  
Long Time ◽  
One Step ◽  
A Minor

For many decades Palaeolithic research viewed the development of early modern human behaviour as largely one of progress down a path towards the ‘modernity’ of the present. The European Palaeolithic sequence — the most extensively studied — was for a long time the yard-stick against which records from other regions were judged. Recent work undertaken in Africa and increasingly Asia, however, now suggests that the European evidence may tell a story that is more parochial and less universal than previously thought. While tracking developments at the large scale (the grand narrative) remains important, there is growing appreciation that to achieve a comprehensive understanding of human behavioural evolution requires an archaeologically regional perspective to balance this.One of the apparent markers of human modernity that has been sought in the global Palaeolithic record, prompted by finds in the European sequence, is innovation in bonebased technologies. As one step in the process of re-evaluating and contextualizing such innovations, in this article we explore the role of prehistoric bone technologies within the Southeast Asian sequence, where they have at least comparable antiquity to Europe and other parts of Asia. We observe a shift in the technological usage of bone — from a minor component to a medium of choice — during the second half of the Last Termination and into the Holocene. We suggest that this is consistent with it becoming a focus of the kinds of inventive behaviour demanded of foraging communities as they adapted to the far-reaching environmental and demographic changes that were reshaping this region at that time. This record represents one small element of a much wider, much longerterm adaptive process, which we would argue is not confined to the earliest instances of a particular technology or behaviour, but which forms part of an on-going story of our behavioural evolution.

Sign in / Sign up

Export Citation Format

Share Document