Dual-Band Impedance Matching Transformer with Loaded Cross-Shaped Structure Obtaining Two Independent Design Parameters

2021 ◽  
Author(s):  
Xingbing Ma ◽  
Zhanghuo Li
Keyword(s):  
Impedance Matching ◽  
Dual Band ◽  
Design Parameters ◽  
Independent Design ◽  
Matching Transformer

Development and Adoption of Early AASHO Design Criteria

1998 ◽  
Vol 1612 (1) ◽  
pp. 26-33 ◽  
Author(s):  
Jerome Hall ◽  
Daniel Turner
Keyword(s):  
Design Parameters ◽  
Design Criteria ◽  
Adoption Process ◽  
Horizontal Curve ◽  
Highway Design ◽  
Initial Development ◽  
Design Processes ◽  
Blue Book ◽  
Curve Design ◽  
Independent Design

The conception, development, and adoption of early AASHO highway design criteria are documented. Examining the early efforts states used to select a design vehicle and develop horizontal curve design criteria illustrates why AASHO’s leadership was necessary. AASHO’s slow and somewhat haphazard criteria development, and the disparity from state to state, demonstrated the need for a national consensus in highway design parameters. AASHO’s role in providing these criteria is outlined through its initial development of policy booklets, followed by its 1954 publication of the landmark Blue Book. The processes by which nine states adopted the AASHO guidance are briefly reviewed. In several cases, the AASHO policy was embraced immediately, and in others it was accepted slowly as states clung to their independent design processes and only gradually updated their design criteria. A few simple conclusions are drawn about the development and adoption process, particularly as it may relate to tomorrow’s highway design criteria.

A compact omnidirectional to directional frequency reconfigurable antenna for wireless sensor network applications

2021 ◽  
pp. 1-12
Author(s):  
Melvin Chamakalayil Jose ◽  
Radha Sankararajan ◽  
Balakrishnapillai Suseela Sreeja ◽  
Mohammed Gulam Nabi Alsath ◽  
Pratap Kumar
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Radiation Pattern ◽  
Antenna System ◽  
Wireless Sensor ◽  
Dual Band ◽  
Design Parameters ◽  
Pin Diodes ◽  
Band Frequency ◽  
Directional Radiation

Abstract In the proposed research paper, a novel compact, ultra-wideband electronically switchable dual-band omnidirectional to directional radiation pattern microstrip planar printed rectangular monopole antenna (PRMA) has been presented. The proposed antenna system has an optimum size of 0.26 λ0 × 0.28 λ0. A combination of radiators, reflectors, and two symmetrical grounds does place on the same layer of the rectangular microstrip PRMA. The frequency agility and the radiation pattern from omnidirectional to directional are achieved using two SMD PIN diodes (SMP1340-04LF). The directional radiation patterns with 180° phase shifts are achieved at the C-band frequency spectrum. The parametric study of the proposed antenna system was performed for different design parameters, and the antenna characteristics were analyzed. An antenna prototype is fabricated using the printed circuit board etching method by using RMI UV laser etching and cutting tools. The measurements of the proposed antenna are conducted in an anechoic chamber to validate the simulations. There are three states of operations due to two SMD PIN diodes being used in switching circuits. In state-I, the proposed antenna radiates at 6.185 GHz (5.275–6.6 75 GHz) in the Ф = 270° direction with a gain of 2.1 dBi, whereas in state-II, it radiates at 5.715 GHz (5.05–6.8 GHz) in the Ф = 90° direction with a gain of 2.1 dBi. In state-III, the antenna exhibits the X-band frequency with center frequency at 9.93 GHz (8.845–10.49 GHz), and the omnidirectional pattern offers a gain of 4.1 dBi. The features of the proposed antenna are suitable for high-speed wireless sensor network communication in industries such as chemical reactors in oil and gas and pharmaceuticals. It is also well suited for IoT and 5G-sub-6-GHz applications.

Dynamics of cardiac muscle: analysis of isotonic, isometric, and isochronal curves

1987 ◽  
Vol 253 (3) ◽  
pp. H645-H653
Author(s):  
O. N. Nwasokwa
Keyword(s):  
Muscle Force ◽  
Isometric Force ◽  
Impedance Matching ◽  
Time Intervals ◽  
Cross Sectional ◽  
Contraction Coupling ◽  
Force Development ◽  
Pentobarbital Sodium Anesthesia ◽  
Matching Transformer ◽  
Isotonic Shortening

Canine papillary muscle force-length-time relation (F-L-t) was investigated under pentobarbital sodium anesthesia. The time intervals taken from end diastole to any point (P) on the force-length plane was determined for isometric (t1) and isotonic (t2) systole and corrected for excitation contraction coupling duration. The ratio t1/t2, designated km, was approximately constant for widely scattered positions of P chosen systematically. The km in the 10 dogs ranged from 0.36 to 0.94 with means +/- SD of 0.66 +/- 0.16; km correlated negatively with muscle average cross-sectional area (r = -0.82; P less than 0.005). Assuming constancy of km, a general relationship was derived between (delta F/delta t)t1L, the rate of isometric force development at P; (delta L/delta t)t2F, the velocity of isotonic shortening at P; (delta F/delta L)(t1,t2)t, the stiffness; and (delta L/delta F)(t1,t2)t, the compliance of the myocardium (all taken at P) as follows (delta F/delta L)t1,t2t = -km(delta F/delta t)t1L/(delta L/delta t)t2F and (delta L/delta F)t1,t2t = -km-1(delta L/delta t)t2F/(delta F/delta t)t1t. The ratio of (delta F/delta t)t1L to (delta L/delta t)t2F defines functional proclivity and measures the differential propensity to force development relative to shortening. Thus myocardial stiffness or compliance determines functional proclivity by acting as an impedance-matching transformer that steps up or steps down force development of shortening as warranted by the loading conditions.

scholarly journals Modified Koch Fractal Antenna for Multi and Wideband Wireless Applications

2021 ◽  
Vol 19 (2) ◽  
pp. 182-189
Author(s):  
Shweta Rani ◽  
Sushil Kakkar
Keyword(s):  
Numerical Simulations ◽  
Impedance Matching ◽  
Optimization Procedure ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Fractal Antenna ◽  
Bacterial Foraging Optimization ◽  
Koch Curve ◽  
Wireless Applications ◽  
Koch Fractal

This paper focuses on the design and development of modified Koch fractal antenna. Compared to traditional Koch curve antenna, the presented antenna possesses a greater number of frequency bands and better impedance matching. Furthermore, the bacterial foraging optimization (BFO) approach is implemented to enhance the impedance bandwidth. The developed technique has been verified by employing various numerical simulations. The design parameters generated from the optimization procedure have been utilized to manufacture the antenna and the respective experimental and simulated results compared. The measured results show that the designed antenna exhibits multi and wideband behavior, covering WLAN, WIMAX, and various other wireless applications.

U-Patch Antenna for RFID and Wireless Applications

2011 ◽  
Vol 324 ◽  
pp. 434-436
Author(s):  
R. Abi Saad ◽  
Zeina Melhem ◽  
Chadi Nader ◽  
Youssef Zaatar ◽  
Doumit Zaouk
Keyword(s):  
Radio Frequency Identification ◽  
Patch Antenna ◽  
Impedance Matching ◽  
Dual Band ◽  
Antenna Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Additional Layer ◽  
Quarter Wavelength ◽  
Frequency Identification

in this paper, we propose a new multi-band patch antenna structure for embedded RFID (Radio Frequency Identification) readers and wireless communications. The proposed antenna is a dual band microstrip patch antenna using U-slot geometry. The operating frequencies of the proposed antenna are chosen as 2.4 and 0.9 (GHz), obtained by optimizing the physical dimensions of the U-slot. Several parameters have been investigated using Ansoft Designer software. The antenna is fed through a quarter wavelength transformer for impedance matching. An additional layer of alumina is added above the surface of the conductors to increase the performance of the antenna.

Design of a high-gain dual-band antipodal Vivaldi antenna array for 5G communications

2021 ◽  
pp. 1-9
Author(s):  
Sumit Kumar ◽  
Amruta S. Dixit
Keyword(s):  
Frequency Spectrum ◽  
Impedance Matching ◽  
High Gain ◽  
Dual Band ◽  
Dual Frequency ◽  
Band Frequency ◽  
Dielectric Lens ◽  
Bottom Side ◽  
Simulation Results ◽  
Vivaldi Antenna

Abstract This paper presents a dual-band 1 × 4 antipodal Vivaldi antenna (AVA) array with high gain to operate over a dual-frequency band that covers the 5G frequency spectrum. The gain is enhanced by employing a dielectric lens (DL). The AVA array consists of four radiating patch elements, corrugations, DL, and array feeding network on the top side. The bottom side contains four radiating patches which are the mirror images of top radiating patches. The designed AVA contains 1 × 4 array antenna elements with a DL that is operating in the ranges of 24.59–24.98 and 27.06–29 GHz. The dimensions of the designed antenna are 97.2 mm × 71.2 mm × 0.8 mm. For the improvement in gain and impedance matching at the dual-band frequency, corrugation and feeding network techniques are used. The gain obtained is about 8–12 dBi. AVA array is tested after fabrication and the measured results are reliable with the simulation results.

A compact polarization reconfigurable stacked microstrip antenna for WiMAX application

2020 ◽  
pp. 1-16
Author(s):  
Murari Shaw ◽  
Niranjan Mandal ◽  
Malay Gangopadhyay
Keyword(s):  
Microstrip Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Substrate Layer ◽  
Linearly Polarized ◽  
Coaxial Probe

Abstract In this paper, a stacked microstrip patch antenna with polarization reconfigurable property has been proposed for worldwide interoperability for microwave access (WiMAX) application. The proposed antenna has two substrate layers: upper and lower layers with two radiating patches connected with the coaxial probe. Without the upper layer the lower square-shaped substrate layer having regular hexagonal radiating patch with probe fed acts as a linear polarized antenna with impedance bandwidth for (S11 ≤ −10 dB) is 370 MHz 10.56% (3.32–3.69 GHz) cover WiMAX (3.4–3.69 GHz) application band. The hexagonal radiating patch is perturbed with an optimum rectangular slot to enhance the impedance bandwidth of the antenna. The lower substrate layer having hexagonal patch with the same probe position is stacked with the upper square-shaped substrate layer with same sized square patch and the upper patch soldered with the coaxial probe. The overall stacked antenna generates a circularly polarized band when the opposite corner of the top square radiating patch of the upper layer is truncated with optimum size. In order to generate another circularly polarized band and to improve the input impedance matching of the stacked antenna, the top radiating patch is perturbed with two slots and a slit. The stacked circularly polarized antenna generates impedance bandwidth of 12.75% (3.23–3.67 GHz) for (S11 ≤ −10 dB) with two circularly polarized bands (3.34–3.37 GHz) and (3.66–3.70 GHz) as per (axial ratio ≤ 3 dB) for WiMAX application. Therefore, the proposed antenna can be used as linearly polarized or dual band circularly polarized according to requirement.

scholarly journals Compact Dual-Band Planar Inverted-e-Shaped Antenna Using Defected Ground Structure

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Wen Piao Lin ◽  
Dong-Hua Yang ◽  
Zong-De Lin
Keyword(s):  
Printed Circuit Board ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Impedance Matching ◽  
Local Area ◽  
Circuit Board ◽  
Dual Band ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure

This paper presents a novel dual-band planar inverted-e-shaped antenna (PIEA) using defected ground structure (DGS) for Bluetooth and wireless local area network (WLAN) applications. The PIEA can reduce electromagnetic interferences (EMIs) and it is constructed on a compact printed circuit board (PCB) size of 10 × 5 × 4 mm3. Experimental results indicate that the antenna with a compact meandered slit can improve the operating impedance matching and bandwidths at 2.4 and 5.5 GHz. The measured power gains at 2.4 and 5.5 GHz band are 1.99 and 3.71 dBi; antenna efficiencies are about 49.33% and 55.23%, respectively. Finally, the good performances of the proposed antenna can highly promote for mobile device applications.

Sign in / Sign up

Export Citation Format

Share Document