Sound absorption performance of flexible polyurethane/silicon dioxide perforated coating composites

2021 ◽  
pp. 004051752110155
Author(s):  
Min Peng ◽  
Xiaoming Zhao ◽  
Weibin Li
Keyword(s):  
Silicon Dioxide ◽  
Sound Absorption ◽  
Woven Fabric ◽  
Perforation Rate ◽  
Cavity Depth ◽  
Resonant Frequencies ◽  
The Matrix ◽  
Absorption Performance ◽  
Traditional Sense ◽  
Flexible Polyurethane

Perforated materials in the traditional sense are rigid, usually dense, costly and inflexible. For this study, polyester/cotton blended woven fabric as the base fabric, nano-SiO2 (silicon dioxide) as the functional particles and PU (polyurethane) as the matrix were selected. Accordingly, flexible PU/SiO2 perforated coating composites with different process parameters were developed. The influence of the nano-SiO2 content, perforation diameter, perforation rate, number of fiber felt layers and cavity depth on the sound absorption coefficient were investigated. The resonant frequencies of materials with different cavity depths were evaluated by both theoretical calculation and experimental method. It was found that the flexible perforated composite has good sound absorption and mechanical properties, and has great potential for applications requiring soft and lightweight sound absorption materials.

Sound absorption property of PVA/PEO/GO nanofiber membrane and non-woven composite material

2019 ◽  
Vol 50 (4) ◽  
pp. 512-525
Author(s):  
Huan Liu ◽  
Baoqi Zuo
Keyword(s):  
Graphene Oxide ◽  
Polyvinyl Alcohol ◽  
Polyethylene Oxide ◽  
Sound Absorption ◽  
Woven Fabric ◽  
Nanofiber Membrane ◽  
Absorption Properties ◽  
Blend Films ◽  
Absorption Performance ◽  
Nanofiber Membranes

Blend films based on polyvinyl alcohol/polyethylene oxide (70/30 wt%) undoped and doped with different concentration of graphene oxide were prepared by spiral vane electrospinning. Characteristic properties of the blend films were investigated by using X-ray diffraction and scanning electron microscopy. The sound absorption performance of the compositions (nanofiber membranes and needle punched non-woven fabric) was tested by an impedance tube. The sound absorption performance of non-woven fabric has greatly improved after combining with thin nanofiber membranes. With addition of graphene oxide, the fibers were intertwined in a loop and form a network, the areal density and surface roughness of the nanofiber membrane are reduced. Composites containing polyvinyl alcohol/polyethylene oxide nanofiber membranes and composites containing polyvinyl alcohol/polyethylene oxide/graphene oxide nanofiber membranes exhibited different sound absorption properties in different frequency bands. When the fiber coefficient of variation was small, the average sound absorption coefficient of the composite material was high. However, composites containing both polyvinyl alcohol/polyethylene oxide and polyvinyl alcohol/polyethylene oxide/graphene oxide nanofiber membranes had similar sound absorption properties, and the average sound absorption coefficient was greater than that of polyvinyl alcohol/polyethylene oxide composites.

scholarly journals Sound Absorption Properties of Perforated Recycled Polyurethane Foams Reinforced with Woven Fabric

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 401
Author(s):  
Roberto Atiénzar-Navarro ◽  
Romina del Rey ◽  
Jesús Alba ◽  
Víctor J. Sánchez-Morcillo ◽  
Rubén Picó
Keyword(s):  
Sound Absorption ◽  
Polyurethane Foams ◽  
Acoustic Properties ◽  
Woven Fabric ◽  
Acoustic Response ◽  
Perforation Rate ◽  
Absorption Properties ◽  
Textile Fabrics ◽  
Membrane Type

The acoustic properties of recycled polyurethane foams are well known. Such foams are used as a part of acoustic solutions in different fields such as building or transport. This paper aims to seek improvements in the sound absorption of these recycled foams when they are combined with fabrics. For this aim, foams have been drilled with cylindrical perforations, and also combined with different fabrics. The effect on the sound absorption is evaluated based on the following key parameters: perforation rate (5% and 20%), aperture size (4 mm and 6 mm), and a complete perforation depth. Experimental measurements were performed by using an impedance tube for the characterization of its acoustic behavior. Sound absorption of perforated samples is also studied—numerically by finite element simulations, where the viscothermal losses were considered; and analytically by using models for the perforated foam and the fabric. Two textile fabrics were used in combination with perforated polyurethane samples. Results evidence a modification of the sound absorption at mid frequencies employing fabrics that have a membrane-type acoustic response.

scholarly journals Research on sound absorption properties of hydrogenated carboxyl nitrile rubber/four-hole hollow polyester fibre composites

2021 ◽  
Vol 72 (02) ◽  
pp. 117-125
Author(s):  
JIE HONG
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Polyester Fibre ◽  
Low Frequency ◽  
Nitrile Rubber ◽  
Engineering Practice ◽  
Negative Effects ◽  
Absorption Properties ◽  
The Matrix ◽  
Absorption Performance

A series composite was prepared by adding hydrogenated carboxyl nitrile rubber (abbreviated HXNBR) as the matrix and four-hole hollow polyester (abbreviated FHHPF) as the reinforcement. The sound absorption properties of these composites were studied. The results show that with the increasing of FHHPF quantity, the storage modulus increases and the loss factor decreases gradually. On the contrary, the sound absorption performance of the composite was improved continuously. Composite with 40% FHHPF in 1 mm thickness is the best. The sound absorption coefficient reached to 0.651 at 2500 Hz and the effective frequency range of absorption coefficient above 0.2 was 1750-2500 Hz. When the amount of FHHPF increased to 50%, negative effects of overuse shown up, that led to the decreasing of the sound absorption property. With a constant mass ratio 70/30 of HXNBR/FHHPF composite, the sound absorption performance can be enhanced by changing its thickness. However, the improvement was smaller after the thickness increased to 2 mm. When increasing the thickness above 2 mm, the improvement of sound absorption performance tended to move to the middle and low frequency. In the meantime, the tensile mechanical properties of the composite were significantly improved by adding FHHPF. Tensile tenacity was improved greatly and the breaking elongation is significantly decreased. The deformation of the composite was smaller and more stable, which was beneficial for the actual engineering practice.

scholarly journals Diffuse Sound Absorptive Properties of Parallel-Arranged Perforated Plates with Extended Tubes and Porous Materials

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1091 ◽  
Author(s):  
Dengke Li ◽  
Daoqing Chang ◽  
Bilong Liu
Keyword(s):  
Boundary Condition ◽  
Porous Material ◽  
Porous Materials ◽  
Sound Absorption ◽  
Azimuthal Angle ◽  
Octave Band ◽  
Frequency Range ◽  
Absorption Coefficients ◽  
Perforated Plates ◽  
Absorption Performance

The diffuse sound absorption was investigated theoretically and experimentally for a periodically arranged sound absorber composed of perforated plates with extended tubes (PPETs) and porous materials. The calculation formulae related to the boundary condition are derived for the periodic absorbers, and then the equations are solved numerically. The influences of the incidence and azimuthal angle, and the period of absorber arrangement are investigated on the sound absorption. The sound-absorption coefficients are tested in a standard reverberation room for a periodic absorber composed of units of three parallel-arranged PPETs and porous material. The measured 1/3-octave band sound-absorption coefficients agree well with the theoretical prediction. Both theoretical and measured results suggest that the periodic PPET absorbers have good sound-absorption performance in the low- to mid-frequency range in diffuse field.

scholarly journals Application of transparent microperforated panel to acrylic partitions for desktop use: A case study by prototyping

2021 ◽  
Author(s):  
Kimihiro Sakagami ◽  
Midori Kusaka ◽  
Takeshi Okuzono ◽  
Shigeyuki Kido ◽  
Daichi Yamaguchi
Keyword(s):  
Adverse Effect ◽  
Sound Absorption ◽  
Acoustic Environment ◽  
Actual Use ◽  
Acrylic Sheet ◽  
Absorption Performance ◽  
The Subject ◽  
Droplet Penetration ◽  
Absorption Characteristics

There are various measures currently in place to prevent the spread of COVID-19; however, in some cases, these can have an adverse effect on the acoustic environment in buildings. For example, transparent acrylic partitions are often used in eating establishments, meeting rooms, offices, etc., to prevent droplet infection. However, acrylic partitions are acoustically reflective; therefore, reflected sounds may cause acoustic problems such as difficulties in conversation or the leakage of conversation. In this study, we performed a prototyping of transparent acrylic partitions to which a microperforated panel (MPP) was applied for sound absorption while maintaining transparency. The proposed partition is a triple-leaf acrylic partition with a single acrylic sheet without holes between two MPP sheets, as including a hole-free panel is important to a possible droplet penetration. The sound absorption characteristics were investigated by measuring the sound absorption in a reverberation room. As the original prototype showed sound absorption characteristics with a gentle peak and low values due to the openings on the periphery, it was modified by closing the openings of the top and sides. The sound absorption performance was improved to some extent when the top and sides were closed, although there remains the possibility of further improvement. This time, only the sound absorption characteristics were examined in the prototype experiments. The effects during actual use will be the subject of future study.

scholarly journals EFFECT OF POROUS STRUCTURE ON SOUND ABSORPTION OF CELLULAR CONCRETE

2020 ◽  
Vol 3 (2) ◽  
pp. 5-18 ◽  
Author(s):  
R.S. Fedyuk ◽  
A. Baranov ◽  
Y.H. Mugahed Amran
Keyword(s):  
Open Porosity ◽  
Sound Absorption ◽  
Concrete Mixture ◽  
Sound Waves ◽  
Foam Concrete ◽  
Mechanical Adhesion ◽  
The Matrix ◽  
Reduce Shear Stress ◽  
The Mathematical Model ◽  
Cellular Concrete

the compositions of gas and foam concrete with improved acoustic characteristics were developed. The optimal form of porosity, which contributes to the absorption of sound waves, both in the range of audible frequencies and at infrasonic and ultrasonic frequencies, is revealed. The mathematical model for designing sound-absorbing concrete was improved, taking into account both the porosity of the composite and the influence of the porous aggregate. The laws of synthesis of aerated concrete and foam concrete are established, which consist in optimizing the processes of structure formation due to the use of a polymineral cement-ash binder and blowing agent. The composition of the composite intensifies the process of hydration of the system, which leads to the synthesis of a polymineral heterodisperse matrix with an open porosity of more than 60%. Peculiarities of the influence of the “Portland cement – aluminosilicate – complex of modifiers” system on the rheology of the concrete mixture was identified, which can significantly reduce shear stress and create easily formed cellular concrete mixtures. The increased activity and granulometry of aluminosilicates predetermine an increase in the number of contacts and mechanical adhesion between particles during compaction, strengthening the frame of inter-pore septa. The mechanism of the influence of the composition of the concrete mixture on the microstructure of the composite is established. The presence of refined aluminosilicates and a complex of additives in the system along with cement contribute to the synthesis of the matrix with open porosity, thereby increasing the sound absorption coefficient.

Sound absorption of a finite flexible micro-perforated panel absorber back by a rigid air cavity filled with a fibrous porous material

2021 ◽  
Vol 263 (3) ◽  
pp. 3625-3632
Author(s):  
Ho Yong Kim ◽  
Yeon June Kang
Keyword(s):  
Energy Dissipation ◽  
Porous Material ◽  
Fibrous Material ◽  
Alternative Energy ◽  
Sound Absorption ◽  
Sound Pressure ◽  
Absorption Coefficients ◽  
Air Cavity ◽  
Acoustic Cavity ◽  
Absorption Performance

Back by a rigid cavity filled with a layer of porous layer, the sound absorption performance of a micro-perforated panel (MPP) can be enhanced in comparison with other resonance based sound absorbers. In this paper, a theoretical model of a finite flexible MPP back by a rigid air cavity filled with a fibrous porous material is developed to predict normal sound absorption coefficients. Displacements of MPP and sound pressure field in fibrous porous material and acoustic cavity are expressed using a series of modal functions, and the sound absorption coefficients of MPP system are obtained. Additionally, comparison of energy dissipation by MPP and fibrous material is performed to identify effects of a fibrous material on the sound absorption of a MPP. As expected, at anti-resonance frequency of an MPP, the fibrous material provide an alternative energy dissipation mechanism.

Sign in / Sign up

Export Citation Format

Share Document