scholarly journals Video-Based Learning on PPKn Education with the Topic of Symbols and Meanings of Pancasila

2021 ◽  
Vol 5 (2) ◽  
pp. 384
Author(s):  
Anggun Rimada Akhmad AR ◽  
Gede Wira Bayu ◽  
I Gde Wawan Sudatha
Keyword(s):  
Development Research ◽  
Test Results ◽  
Analysis Techniques ◽  
Analysis Technique ◽  
Qualitative Descriptive ◽  
The Media ◽  
The Subject ◽  
Video Based Learning ◽  
Quantitative Descriptive ◽  
Descriptive Statistical Analysis

Learning activities have not been carried out optimally. The learning media used is only fixed on one source of textbooks, so students have difficulty understanding the material. In addition, teachers only teach using the assignment and lecture methods. This study aims to develop learning media in the form of videos to assist students in learning. This type of research is development research with the model used is ADDIE. The methods used in collecting data are observation, interviews, and questionnaires. The instrument used in collecting data is a questionnaire. The subject of this research is Civics learning video media on the topic of symbols and meanings of the Pancasila precepts, in this study the data analysis technique used in this development research was using qualitative descriptive statistical analysis techniques and quantitative descriptive statistics. The results of the research are the results of the expert test of the content of the subjects developed to get the results of 4.84 with very good qualifications, the learning design experts get the results of 4.22 with very good qualifications, the test results from the learning media experts get the results of 4.30 with the qualifications very good. The results of the practitioner test got a result of 4.58 with very good qualifications, the results of the limited trial got a result of 4.79 with very good qualifications. It can be concluded that the media developed is feasible to be applied in learning. The implication of this research is that the developed media can make it easier for students to understand Civics subject matter, especially the topic of symbols and meanings of the Pancasila precepts.

scholarly journals ANALYSIS TINGKAT KESEGARAN JASMANI ANGGOTA UKM BOLABASKET UNIVERSITAS TEKNOKRAT INDONESIA

2020 ◽  
Vol 1 (1) ◽  
pp. 25-32
Author(s):  
Adityo Pratama ◽  
Rizki Yuliandra
Keyword(s):  
Physical Fitness ◽  
Vertical Jump ◽  
Sport Activity ◽  
Physical Fitness Test ◽  
Fitness Level ◽  
Analysis Technique ◽  
Qualitative Descriptive ◽  
The Subject ◽  
Run Test ◽  
Descriptive Statistical Analysis

Physical fitness is one of the important components in doing any activities. The sport activity is closely related to the achievements that cannot be separated from several factors and one of them is physical fitness. Related to this issue, the physical fitness of basketball club members in Universitas Teknorat Indonesia has not been known yet. Therefore, this study aims to measure the physical fitness level of basketball club members in Universitas Teknorat Indonesia. This study is a qualitative descriptive study by surveying basketball members. The subject of this study is 30 members of basketball club in Universitas Teknorat Indonesia. The data collecting technique used in this study is TKJI instrument consisting of 5 item tests, they are 50-meter run test, pull up, sit up, vertical jump, and run 1,2 KM. Descriptive statistical analysis with percentages is employed in this research as the data analysis technique. The result of this study shows that the physical fitness levels of basketball club members in Universitas Teknorat Indonesia are 26,66% for 8 members, 53,3% of medium classification for 16 members, 20,1% of less classification for 6 members, and none of the members has an excellent and poor classification. Thus, the result of the physical fitness level test for members of basketball club in Universitas Teknorat Indonesia can be categorized at a medium level.Keywords: Physical Fitness, Test, Run, Push Up, Sit Up, Vertical Jump

scholarly journals Pengembangan Jobsheet Rangkaian Elektronika Kelas XI Teknik Elektronika Industri

2019 ◽  
Vol 4 (2) ◽  
pp. 130-137
Author(s):  
Aditya Sunu Widyanto ◽  
Priyanto Priyanto
Keyword(s):  
Data Analysis ◽  
Development Model ◽  
Development Research ◽  
Electronic Circuits ◽  
Percentage Score ◽  
Average Percentage ◽  
Electronic Engineering ◽  
Analysis Technique ◽  
The Media ◽  
Quantitative Descriptive

The purpose of this study is designed to: (1) develop Job sheet in accordance with the curriculum for Grade XI students of Electronic Engineering; and (2) describes the percentage level of job sheet worthiness as a learning device for implementing electronic circuits. This research is a development research using the development model of 4-D models with four main stages namely, Define, Design, Develop, Disseminate. Data collection was carried out using a questionnaire. The data analysis technique in this research is quantitative descriptive. The results of the study note that: (1) Job sheet was developed containing 13 materials; and (2) based on the results of the assessment of the media experts, the average percentage was 86.76% (very feasible), the material experts reached the average percentage of 81% (feasible), and the students got an average percentage score of 88.34% (very good). Although job sheets are considered appropriate and good for use in learning, there are some limitations regarding their application by teachers when teaching.

Pengembangan media smart powerpoint berbasis animasi dalam pembelajaran fisika

2020 ◽  
Vol 1 (1) ◽  
pp. 12-17
Author(s):  
Irnin Agustina Dwi Astuti ◽  
Maria Dewati ◽  
Indica Yona Okyranida ◽  
Ria Asep Sumarni
Keyword(s):  
Statistical Analysis ◽  
Data Collection ◽  
Average Score ◽  
Development Research ◽  
Questionnaire Data ◽  
Qualitative Descriptive ◽  
The Media ◽  
Descriptive Statistical Analysis

The topic of motion in physics is one material that requires a real explanation so that it is easily understood by students. One of the strategies is to provide powerpoint animation learning media. This study aims to produce learning media that are suitable for use in learning. This research is a development research (R & D) with model of Borg and Gall. The instrument of data collection is a validation questionnaire. Data were analyzed by qualitative descriptive and descriptive statistical analysis. The results of this study indicate the media feasibility of learning aspects of learning, with an average score of 3.11 or 77.75% and included in the criteria "sufficiently valid" to be used in learning at school.

scholarly journals PENGARUH ANALISIS FIXED SAMPLE SIZED SAMPLING, STOP OR GO SAMPLING, DAN DISCOVERY SAMPLING TERHADAP TINGKAT EFEKTIVITAS SISTEM PENGENDALIAN INTERN ATAS AKTIVITAS PEMBUATAN AKTA FIDUSIA DAN WAARMERKING PADA KANTOR NOTARIS DEWI MEUTIA KOTA PROBOLINGGO

2018 ◽  
Vol 11 (2) ◽  
pp. 38-45
Author(s):  
Mutimmah Rustianawati ◽  
Febri Yanti Dwita
Keyword(s):  
Control System ◽  
Internal Control ◽  
Testing Procedure ◽  
Analysis Techniques ◽  
Fixed Sample ◽  
Analysis Technique ◽  
Internal Control System ◽  
The Subject ◽  
Quantitative Descriptive ◽  
Discovery Sampling

This research aims to determine the level of effectiveness the company's internal control system if measured by using the analysis of Fixed Sample Sized Sampling, Stop Or Go Sampling, and Discovery Sampling. The subject of this research is Kantor Notaris of DewiMeutiaCiptaNingrum, S.H., M.H., M.Kn which used as research sample. This research data is obtained from direct observation of the transaction evidence that has been selected by using purposive sampling with certain criteria. The analysis technique used is quantitative descriptive technique. The steps of data analysis techniques used in this study is to calculate the effectiveness level of internal control system using Fixed Sample Sized Sampling, calculate the effectiveness of internal control system using Stop Or Go Sampling, and calculate the effectiveness level of internal control system using the Discovery Sampling testing procedure. The result of data processing shows that Internal Control System of DewiMeutiaProbolinggo Notary Office is considered effective.

PENGARUH ANALISIS FIXED SAMPLE SIZED SAMPLING, STOP OR GO SAMPLING, DAN DISCOVERY SAMPLING TERHADAP TINGKAT EFEKTIVITAS SISTEM PENGENDALIAN INTERN ATAS AKTIVITAS PEMBUATAN AKTA FIDUSIA DAN WAARMERKING PADA KANTOR NOTARIS DEWI MEUTIA KOTA PROBOLINGGO

2018 ◽  
Vol 11 (2) ◽  
pp. 38-48
Author(s):  
Mutimmah Rustianawati ◽  
Febri Yanti Dwita
Keyword(s):  
Control System ◽  
Internal Control ◽  
Testing Procedure ◽  
Analysis Techniques ◽  
Fixed Sample ◽  
Analysis Technique ◽  
Internal Control System ◽  
The Subject ◽  
Quantitative Descriptive ◽  
Discovery Sampling

This research aims to determine the level of effectiveness  the company's internal control system if measured by using the analysis of Fixed Sample Sized Sampling, Stop Or Go Sampling, and Discovery Sampling. The subject of this research is Kantor Notaris of DewiMeutiaCiptaNingrum, S.H., M.H., M.Kn which used as research sample. This research data is obtained from direct observation of the transaction evidence that has been selected by using purposive sampling with certain criteria. The analysis technique used is quantitative descriptive technique. The steps of data analysis techniques used in this study is to calculate the effectiveness level of internal control system using Fixed Sample Sized Sampling, calculate the effectiveness of internal control system using Stop Or Go Sampling, and calculate the effectiveness level of internal control system using the Discovery Sampling testing procedure. The result of data processing shows that Internal Control System of DewiMeutiaProbolinggo Notary Office is considered effective. 

PENGEMBANGAN BAHAN AJAR BERBASIS PENDEKATAN OPEN ENDED PADA MATERI PENGUKURAN PANJANG DAN BERAT UNTUK MENINGKATKAN KEMAMPUAN PENALARAN SISWA KELAS IV DI SD N BUGANGAN 03 SEMARANG

2020 ◽  
Vol 1 (1) ◽  
pp. 77-86
Author(s):  
Happy Prawitasari Nourmaningtyas ◽  
Joko Sulianto ◽  
Aries Tika Damayani
Keyword(s):  
Data Analysis ◽  
Research And Development ◽  
Mathematics Learning ◽  
Teaching Material ◽  
Teaching Materials ◽  
Reasoning Abilities ◽  
Analysis Technique ◽  
Qualitative Descriptive ◽  
The Media ◽  
Quantitative Descriptive

The background that encourages this research and development is the lack of teaching materials in the fourth grade mathematics learning at SD NegeriBugangan 03 Semarang. The research objectives to be achieved in this study were to determine the feasibility of developing teaching materials based on an open-ended approach on material measuring length and weight. This research is a research development (Research and Development). The data analysis technique used qualitative descriptive and quantitative descriptive. The feasibility results are based on data analysis by media experts and material experts, and field trial results assessment. The results of the media validation was 90,6%, the material expert validation was 93,3%, and the evaluation of the test results by several teachers for the media was 88,4% and the material was 88%. This shows that teaching materials based on an open-ended approach are suitable for use as supporting teaching materials in mathematics learning. The suggestion that the writer can convey is that hoped that the teacher does not only use one teaching material. At least, teachers use supporting other teaching materials to support the main teaching material. In addition, teachers should pay attention to the level of students reasoning abilities to support students mathematical skills.

scholarly journals Design of E-Module Based on Discovery Learning in Basic Boga Students of Class X Tata Boga in SMK Negeri 1 Beringin

2021 ◽  
Vol 4 (1) ◽  
pp. 8-18
Author(s):  
Lulu Fajar Wati ◽  
Agusti Efi
Keyword(s):  
Research And Development ◽  
Learning Outcomes ◽  
Descriptive Analysis ◽  
Discovery Learning ◽  
Development Research ◽  
Student Responses ◽  
Analysis Techniques ◽  
Analysis Technique ◽  
The Media

The purpose of this research is to produce a valid e-modules based on discovery learning, and effective in basic food subjects. This e-modules based on discovery learning is designed to improve student’s understanding so that it can improve students learning outcomes. The method in this study uses Research and Development (R&D) with 4-D development procedures (Define, Design, Develop, Desseminate). The data of analysis technique uses descriptive analysis techniques to describe the validity, practicality, and effectiveness of e-modules based on discovery learning. The results obtained of this development research: The validity of e-modules based on discovery learning is declared valid on the media and material aspects. The practicality of e-modules based on discovery learning  from teacher and student responses is stated to be very practical. The effectiveness of e-modules based on discovery learning is stated to be effective in improve to learn the outcomes. Based on the findings of this study it is concluded that the e-modules based on discovery learning is valid, practical, and effective to be used as a learning aid in basic food subjects.

scholarly journals Kemampuan dan Kesulitan Siswa Kelas X SMA Negeri 3 OKU dalam Menulis Teks Negosiasi

2019 ◽  
Vol 5 (2) ◽  
pp. 122-132
Author(s):  
Esta Rahma Dhania ◽  
Samsul Anam ◽  
Awalludin Awalludin
Keyword(s):  
Data Analysis ◽  
Performance Test ◽  
Test Results ◽  
Average Value ◽  
Analysis Technique ◽  
Statistical Analysis Technique ◽  
Quantitative Descriptive ◽  
Data Collection Technique ◽  
The Right ◽  
Descriptive Statistical Analysis

The purpose of this study was (1) to describe the ability of class X students of SMA Negeri 3 OKU in write negotiating text and (2) to describe the difficulties of class X students of SMA Negeri 3 OKU in write negotiating text. The method used in this research is quantitative descriptive. The data collection technique used in this study is performance test and questionnaires. The data analysis technique used is descriptive statistical analysis technique. The test results show that from 33 people, students who scored 80—100 with a very capable category numbered 12 people (36.36%), students who scored 66—79 with a capable category amounted to 12 people (36.36%), students those who get grades of 56—65 with a category of capable enough amount to 6 people (18.18%), students who score 46—55 with a category of underprivileged number of 3 people (9.09%), and there are no students who get a score categorized as a failure. The average value of students writing negotiating texts is 72.09. Thus, the ability of students to write negotiating texts is quite capable. Based on the results of questionnaire data analysis, it is known that the difficulties faced by students in writing negotiating text are that students often have difficulty determining the right choice of words because of their limited understanding of diction and students often have difficulty in determining the structure of negotiating text writing.

scholarly journals Pengembangan media pembelajaran ipa berbantuan komputer pada materi gerak lurus untuk siswa SMP/MTs kelas VIII

2021 ◽  
Vol 1 (2) ◽  
pp. 111-121
Author(s):  
Ardiansyah Fitrul Firdaus ◽  
Winarto Winarto ◽  
Safwatun Nida
Keyword(s):  
Descriptive Analysis ◽  
Eighth Graders ◽  
Development Stage ◽  
Computer Assisted ◽  
Instructional Media ◽  
Test Results ◽  
Analysis Techniques ◽  
Qualitative Descriptive ◽  
The Subject ◽  
Validity Concept

The purpose of this study is to produce Science instructional media of computer-assisted on the subject of linear motion for eighth graders which fit to use. This research is a development being done using 4-D Thiagarajan development model which done to development stage. The research data used is quantitative and qualitative data. Data was collected using a validation and test legibility questionnaires. The data analysis techniques used is qualitative descriptive analysis and averages calculation techniques. Results of media and of material validations obtained that the percentage of media feasibility is 93.33 percent and the percentage of material feasibility is 85,52 percent with the percentage of validity concept is 95,83 percent, while the legible test results showed that the learning media can be accepted by the students. Based on the results of validation and legible test can be concluded that the instructional media developed feasible to use in learning. Tujuan penelitian ini adalah untuk menghasilkan media pembelajaran IPA berbantuan komputer pada materi gerak lurus untuk siswa SMP/MTs kelas VIII yang layak digunakan. Penelitian ini merupakan penelitian pengembangan yang dilakukan dengan menggunakan model pengembangan 4-D Thiagarajan yang dilakukan hanya sampai pada tahap Develop. Data penelitian yang digunakan berupa data kuantitatif dan kualitatif. Data dikumpulkan dengan menggunakan instrumen berupa angket validasi dan angket uji keterbacaan. Teknik analisis data yang digunakan adalah teknik analisis deskriptif kualitatif dan teknik penghitungan rata-rata. Hasil validasi media dan validasi materi diperoleh persentase kelayakan media sebesar 93,33 persen dan persentase kelayakan materi sebesar 85,52 persen dengan persense kebenaran konsep sebesar 95,83 persen, sedangkan hasil uji keterbacaan menunjukkan bahwa media pembelajaran dapat diterima oleh siswa. Berdasarkan hasil validasi dan uji keterbacaan dapat disimpulkan bahwa media pembelajaran yang dikembangkan layak untuk digunakan di dalam pembelajaran.

scholarly journals Perancangan CNC Plasma Cutting Menggunakan Software Autodesk Inventor 2015

2021 ◽  
Vol 12 (1) ◽  
pp. 1
Author(s):  
Saiful Irfan ◽  
Rusiyanto Rusiyanto
Keyword(s):  
Safety Factor ◽  
Research Method ◽  
Maximum Deviation ◽  
Plasma Cutting ◽  
Test Results ◽  
Analysis Techniques ◽  
Analysis Technique ◽  
Precision Level ◽  
Minimum Safety Factor ◽  
Descriptive Statistical Analysis

<p class="Abstract">This study aims to determine the frame safety factor and the precision level of CNC plasma cutting results. The research method used is a research and development model, namely the French model. This model has 8 steps that are used to produce a CNC plasma cut design. The data analysis technique used is descriptive statistical analysis techniques derived from the results of tests conducted. Safety factor testing was conducted using the 2015 Autodesk Inventor software with a frame of 110.54 N. The precision cutting results were carried out three times using the same instrument, 20 currents with a speed of 400 mm/min, against ST 37 material with a thickness of 1.3 mm. The results showed that the frame was categorized as safe because the minimum safety factor value was 4.23 ul and the cut test results showed an average measurement with a maximum deviation of 0.3 mm, so it could be concluded that plasma CNC cutting had tolerance. rate of ± 0.3 mm.</p>

Sign in / Sign up

Export Citation Format

Share Document