ALCOA 6061 COLD FINISHED BAR

Alloy Digest ◽  
1998 ◽  
Vol 47 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Resistance ◽  
High Strength ◽  
Wire Rod ◽  
Good Workability

Abstract Alcoa 6061 alloy has excellent joining characteristics and good acceptance of applied coatings. It combines relatively high strength, good workability, and high resistance to corrosion. The alloy is widely available. The T8 and T9 tempers offer better chipping characteristics than the T6 temper. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-349. Producer or source: ALCOA Wire, Rod & Bar Division.

BERYLCO 717C

Alloy Digest ◽  
1967 ◽  
Vol 16 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Resistance ◽  
Sea Water ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy

Abstract BERYLCO 717C is a high strength, age-hardenable copper-nickel casting alloy. It has high resistance to sea water corrosion and is recommended for marine equipment applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-178. Producer or source: Beryllium Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

ALCOA 2024

Alloy Digest ◽  
1998 ◽  
Vol 47 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
High Strength ◽  
Machined Surface ◽  
2024 Alloy ◽  
Structural Applications ◽  
Strength Material

Abstract Alcoa 2024 alloy has good machinability and machined surface finish capability, and is a high-strength material of adequate workability. It has largely superseded alloy 2017 (see Alloy Digest Al-58, August 1974) for structural applications. The alloy has comparable strength to some mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-346. Producer or source: ALCOA Wire, Rod & Bar Division.

UDIMET 520

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Nickel Base

Abstract UDIMET 520 is a nickel-base alloy recommended for applications where high strength at elevated temperatures is required. It is suitable for service at temperatures up to 1800 F. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-74. Producer or source: Special Metals Inc..

BRIMCOLLOY

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Corrosion Resistance ◽  
Rolling Mills ◽  
High Corrosion ◽  
Copper Zinc

Abstract BRIMCOLLOY is a copper-zinc tin alloy having high strength, spring temper, superior conductivity and high corrosion resistance. It is produced in three grades: BRIMCOLLOY 100, BRIMCOLLOY 200, and BRIMCOLLOY 300. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-225. Producer or source: Bridgeport Rolling Mills Company.

ACCURATE METAL

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Copper Nickel Alloy

Abstract ACCURATE METAL is a copper-nickel alloy having high strength, ductility and corrosion resistance. It was especially designed for exacting electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-207. Producer or source: Connecticut Metals Corporation.

ALCOA 7075

Alloy Digest ◽  
1998 ◽  
Vol 47 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
High Strength ◽  
Structural Parts ◽  
7075 Alloy ◽  
Very High

Abstract Alcoa 7075 alloy has very high strength and is used for highly stressed structural parts. The T7351 temper offers improved stress-corrosion cracking resistance. The alloy’s strength level equals or exceeds mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-350. Producer or source: ALCOA Wire, Rod & Bar Division.

MONEL ALLOY 502

Alloy Digest ◽  
1970 ◽  
Vol 19 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract MONEL alloy 502, a modification of MONEL alloy K-500, provides improved machinability. It maintains high strength up to about 800 F and has good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-157. Producer or source: Huntington Alloy Products Division.

SWISSMETAL SM275H (BOILLAT CN8)

Alloy Digest ◽  
2002 ◽  
Vol 51 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Automotive Industry ◽  
Heat Treating ◽  
Bend Strength ◽  
Good Workability

Abstract Swissmetal alloy SM275H is a hardenable Cu-Ni-Sn alloy with good workability and corrosion resistance. It is often used in the automotive industry for springs, contacts, and clips. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-687. Producer or source: Swissmetal Metalworks Ltd, Plant Boillat.

ELEKTRON AZM

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Strength Level ◽  
Extrusion Alloy

Abstract ELEKTRON AZM is a magnesium extrusion alloy having a high strength level. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-45. Producer or source: Magnesium Elektron Ltd.

Sign in / Sign up

Export Citation Format

Share Document