scholarly journals STUDY THE CONTAMINATION OF SOME CHEMICAL POLLUTANTS IN HOT FOODS STORED IN PLASTIC BAGS AND CONTAINERS

2019 ◽  
Vol 50 (3) ◽  
Author(s):  
R. A. Abu-Almaaly
Keyword(s):  
Heavy Metals ◽  
Heavy Elements ◽  
Local Market ◽  
Thermal Treatments ◽  
Three Solutions ◽  
Water Contaminants ◽  
Chemical Pollutants ◽  
Plastic Bags ◽  
Significant Difference ◽  
Atomic Absorption Technique

Plastic food containers and bags are classified as the most dangerous food and water contaminants around the world, because of the possibility to transfer the chemicals from it to food as a result of heating. Therefore this study was aimed to estimate the chemical pollutants (heavy metals included lead, cadmium, arsenic, mercury and zinc) that transfer from plastic food containers and bags to food. Thirty food containers (15 packages and 15 bags) synthesized from Polyethylene Terephthalate (PET) were purchased from the local market in Baghdad. Cut each into small equal pieces (0.5×0.5) cm and placed in a thermo glass containers then submerged 3 food solution (D.W, 3%, acetic acid, and olive oil). Two thermal treatments were done on it; the first one was carried out by boiling on a hot plate surface for 10 and 15 minutes, and the second by heating in microwave for 5 and 10 minutes, heavy metals were estimated by using Atomic Absorption technique. The results showed the significant difference between the concentration of the elements at level (p<o.o5) in these treatment. Also transfer of heavy elements at zero time was very small percentage and insignificant, and the concentration of heavy metals in three solutions were increased as C>B>A after treated with two thermal treatment. The concentration of all heavy elements in this solution after heating for 10 minutes and heating in microwave for 5 and 10 minutes. Were higher than the acceptable limits by the Food and Drug Administration (FDA) and European Commission (EU).

scholarly journals The Effect of Granular Activated Carbon and Biochar on the Availability of Cu and Zn to Hordeum sativum Distichum in Contaminated Soil

Plants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 841
Author(s):  
Marina Burachevskaya ◽  
Saglara Mandzhieva ◽  
Tatiana Bauer ◽  
Tatiana Minkina ◽  
Vishnu Rajput ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Activated Carbon ◽  
Spring Barley ◽  
Granular Activated Carbon ◽  
Total Content ◽  
Metal Compounds ◽  
Significant Difference ◽  
High Sorption ◽  
Living Organisms ◽  
Cu And Zn

The presence of heavy metals in the soil could impose serious problems on soil-plant systems due to the accumulation of heavy metals in plants. Even vital elements such as Cu and Zn have a toxic effect in the case of excessive intake by living organisms. The present work aimed to investigate the content of loosely bound (exchangeable, complexed, and specifically sorbed) compounds of Cu and Zn and their availability to spring barley (Hordeum sativum distichum) in contaminated Haplic Chernozem soil under the conditions of a model experiment (five approximate permissible concentrations (APC) and 10 APC of metal). Changes in the bioavailability of the metals upon application of carbon sorbents were observed. An increase in loosely bound metal compounds has been shown under conditions of soil contamination with metals (up to 57% of the total content). The increase in the availability of Cu in the soil was mainly due to the formation of complexed metal forms with organic matter (up to 17%). The availability of Zn was found to be associated with an increase in exchangeable (up to 21%) and specifically sorbed compounds (up to 27%). Granular activated carbon (GAC) and biochar have high sorption properties. A decrease in the content of loosely bound compounds of metals was established, especially in the most mobile forms such as exchangeable and complexed forms. The introduction of sorbents into the soil opened up a new venue for binding heavy metals in situ, eventually leading to a decrease in their bioavailability. The inactivation of Cu and Zn in the soil upon the application of sorbents led to a decrease in metal absorption by spring barley. The highest efficiency of biochar application was established at a dose of 2.5% and 5% in soil contaminations of 5 APC and 10 APC of Cu or Zn. The efficiency of the use of sorbents was more influenced by the dose of application than by the type of sorbent. There was no significant difference between biochar and GAC. Stabilization and inactivation of metals may improve soil fertility and plant growth.

scholarly journals Heavy metal levels in cattle egrets (Bubulcus ibis) foraging in some abattoirs in Lagos State metropolis

2021 ◽  
Vol 45 (1) ◽  
Author(s):  
Elijah Abakpa Adegbe ◽  
Oluwaseyi Oluwabukola Babajide ◽  
Lois Riyo Maina ◽  
Shola Elijah Adeniji
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Accumulation ◽  
Heavy Metal Contamination ◽  
Heavy Metal Accumulation ◽  
Bubulcus Ibis ◽  
Significant Difference ◽  
Metal Levels ◽  
Lagos State ◽  
The Mean

Abstract Background Heavy metal accumulation in the ecosystem constitutes a potential toxic effect which is hazardous to human health. Increasing environmental pollution has necessitated the use of cattle egrets to evaluate the levels of heavy metal contamination, to establish their use in biomonitoring of heavy metals and to provide data for monitoring pollution in the environment. Results The present study assessed the utilization of Bubulcus ibis in monitoring pollution in five abattoirs, namely Agege, Bariga, Kara, Itire and Idi-Araba, all situated in Lagos State. The concentration of five (5) heavy metals, cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb) and zinc (Zn) was determined in the liver, muscle and feather of Bubulcus ibis using the atomic absorption spectrophotometer. The trend of metal accumulation was in the order: Zn > Cu > Pb > Cd > Ni for all the sampled tissues. The mean tissue concentrations of the metals were significantly different (p < 0.05) among the sites. The highest levels of metal concentration were reported in the liver in all the locations. Mean concentration of Cd in Kara (0.003 ± 0.00058) was significantly (p < 0.05) higher than those found at Agege (0.0013 ± 0.00058) and Idi-Araba (0.001 ± 0.001). A significant difference (p < 0.05) was also observed between the mean concentrations of Cu in Bariga (0.01 ± 0.001) and Idi-Araba (0.003 ± 0.001). Conclusion All the studied heavy metals were present in the liver, muscle and feathers of the cattle egrets. The contamination levels were ascertained from the study which indicated that cattle egrets are useful in biomonitoring studies and the generated data will serve as baseline data which could be compared with data from other locations for monitoring heavy metal pollution.

scholarly journals Determination of essential and non-essential element contents of drinking water and baby water for infant’s nutrition

2021 ◽  
Vol 44 (1) ◽  
pp. 194-202
Author(s):  
Funda Demir ◽  
Meral Yildirim Ozen ◽  
Emek Moroydor Derun
Keyword(s):  
Water Samples ◽  
Infant Nutrition ◽  
Tap Water ◽  
Essential Element ◽  
Essential Elements ◽  
Local Market ◽  
Drinking Waters ◽  
Significant Difference ◽  
Element Contents

Abstract In this study, essential (Ca, Cr, Cu, Fe, K, Mg, Na, P, Zn), and non-essential (Al, Ni, Pb) element contents of the drinking and baby water samples which are sold in the local market and tap water samples in Istanbul were examined. It was determined that elements of Cr, Cu, Fe, P, Zn, Al, and Ni were below detection limits in all water samples. Among the non-essential elements analyzed in water samples, Pb was the only detected element. At the same time, the percentages that meet the daily element requirements of infants were also calculated. As a result of the evaluations made, there is no significant difference in infant nutrition between baby waters and other drinking waters in terms of the element content.

A comparison of Charolais × Jersey and Friesian animals for vealer and steer beef production

1978 ◽  
Vol 18 (93) ◽  
pp. 505
Author(s):  
FJ Mickan ◽  
SA Spiker ◽  
RH Hallett
Keyword(s):  
Milk Intake ◽  
Local Market ◽  
Beef Production ◽  
Eye Muscle ◽  
Breed Difference ◽  
Significant Difference ◽  
Fat Thickness ◽  
Dressing Percentage

Charolais sires were mated to Jersey dams and the progeny compared with Friesians for vealer (33 weeks) and steer (90 weeks) beef production. Nurse cows double-suckled one vealer of each breed. No significant difference in growth to slaughter between the Charolais x Jersey (C x J) and Friesian (0.79, 0.70 kg day-1 respectively) was recorded. The C x J vealers produced a significantly heavier carcase. Neither breed had sufficient fat cover (< 0.3 mm) for vealer production. No breed difference existed in the edible meat and fat proportions but the Friesian carcase had a larger percentage of bone. C x J had a significantly greater proportion of hindquarter in the carcase than the Friesian but no breed difference was recorded for either high or low priced cuts. Plunketting showed no difference in milk intake between breeds, but 24-hourly observations revealed that the C x J animals were usually the first to arrive at and last to leave the suckled cow. Steers double-suckled to weaning (1 2 weeks) and then run together until slaughtering gained 0.56 kg animal-1 day-1. There was no breed difference in carcase weights but the C x J had a significantly higher dressing percentage (53.1 vs. 50.5) and 25.3 per cent greater area of eye muscle. Again, fat thickness of the C x J (2.1 mm) and Friesian (1.8 mm) was far below the optimum (7-10 mm) required for the local market.

scholarly journals Comparative results of gastric submucosal injection with hydroxypropyl methylcellulose, carboxymethylcellulose and normal saline solution in a porcine model

2010 ◽  
Vol 47 (2) ◽  
pp. 184-187 ◽  
Author(s):  
Luciano Lenz ◽  
Veruska Di Sena ◽  
Frank S. Nakao ◽  
Gustavo Paulo de Andrade ◽  
Maria Rachel da Silveira Rohr ◽  
...  
Keyword(s):  
Median Time ◽  
Normal Saline ◽  
Thermal Injury ◽  
Porcine Model ◽  
Saline Solution ◽  
Hydroxypropyl Methylcellulose ◽  
Three Solutions ◽  
Submucosal Injection ◽  
Significant Difference ◽  
Comparative Results

CONTEXT: Endoscopic mucosal resection is an established modality for excision of sessile lesions in the gastrointestinal tract. Submucosal fluid injection creates a cushion and may prevent thermal injury and perforation. OBJECTIVES: This blind study investigated the performance of three different solutions to create submucosal fluid cushions in porcine stomach. METHODS: Three solutions were injected in the stomach of nine pigs BR1: normal saline solution, carboxymethylcellulose 0.5% and hydroxypropyl methylcellulose 0.25%. In each pig, submucosal injections with 6 mL per test-solution were performed. One drop of methylene blue was added to all injections for better visualization. The time for the bleb to disappear was recorded. RESULTS: The overall median time of visible submucosal cushion was 37 minutes (range 12-60 min) for hydroxypropyl methylcellulose, 31 minutes for carboxymethylcellulose (range 10-43 min) and 19 minutes for normal saline solution (range 8-37 min). There was no statistically significant difference neither between normal saline solution and carboxymethylcellulose (P = 0.146) nor carboxymethylcellulose and hydroxypropyl methylcellulose (P = 0.119) but the median duration of hydroxypropyl methylcellulose was significantly longer than normal saline solution (P = 0.039). CONCLUSIONS: The length of hydroxypropyl methylcellulose submucosal fluid cushion is longer in comparison with normal saline solution. The median time for carboxymethylcellulose was not longer than normal saline solution. Hydroxypropyl methylcellulose, in the concentration of 0.25%, may be a durable alternative for submucosal injection.

scholarly journals Distribution of some heavy metals in the soils of beech communities in the NP Djerdap

2003 ◽  
pp. 17-25 ◽  
Author(s):  
Snezana Belanovic ◽  
Milan Knezevic ◽  
Ratko Kadovic ◽  
Milorad Danilovic
Keyword(s):  
Heavy Metals ◽  
Soil Depth ◽  
Significant Difference

The concentrations of some heavy metals in the soils of beech communities (Fagetum submontanui luzuletosum, Fagetum submontanum drymetosum and Musco-Fagetum) were studied in the region of Djerdap. The significant difference was determined between the concentrations of heavy metals (Pb, Zn and Cd) in the soils, and also the dependence of the contents of elements in the soil on the soil depth.

scholarly journals Empirical Characterization of Heavy Metals in Crude Oil Spill Sites in Emohua, Rivers State, Nigeria

2021 ◽  
Vol 2 (5) ◽  
pp. 24-28
Author(s):  
Nnamdi Michael Ahiamadu ◽  
Ify L. Nwaogazie ◽  
Yusuf O. L. Momoh
Keyword(s):  
Heavy Metals ◽  
Surface Water ◽  
Oil Spill ◽  
Environmental Protection Agency ◽  
Surface Soil ◽  
Soil Samples ◽  
Petroleum Resource ◽  
Significant Difference ◽  
Rivers State ◽  
Pb Concentration

The study assessed the concentration of heavy metals in three oil spill sites in Emohua local government area in Rivers State, Nigeria. Soil samples were collected at depth 0-30cm for surface soil samples and up to 10m for sub-surface soil samples depending on the depth of borehole. Groundwater samples were collected from drilled boreholes while the surface water samples were collected from fishponds or water bodies (rivers) close to the oil spill sites. The samples taken from the oil spill sites were analysed to determine the level of concentration of 10 Department of Petroleum Resource (DPR) specified heavy metals (Cd, Zn, Cu, Pb, Cr, Ba, Ni, Hg, As, and Co). BUCK Scientific Atomic Absorption Spectrophotometer (AAS) was used in detecting the concentration of the heavy metals. For the surface soil, Pb concentration in site A and B were significantly higher than what was obtained at site C, with a mean concentration of 219.70, 130.01 and 3.41mg/kg respectively for the three sites. The mean lead (Pb) concentration obtained in the surface soil was within DPR and United State Environmental Protection Agency (USEPA) acceptable limits. Barium also has significant concentration in both the surface soil and sub-surface soil. Kruskal Wallis test indicated significant difference in the Pb, Cd, Zn, Cu, Cr and Ba concentration in surface/topsoil among the three sites and also indicated significant difference in the concentrations of Pb, Cd, Cr, Ni, Ba and As in sub-surface soil among the sites. Little heavy metal concentration was found in both the groundwater and surface water. The study showed that even if some heavy metals were detected at the oil spill sites, they do not pose any serious health risk, as all the heavy metals in the four environmental media at the three sampling sites were below the national limit stipulated by the Department of Petroleum Resource (DPR), Nigeria.

scholarly journals Evaluation of Physicochemical and Microbial Quality Control of Hemodialysis Machines Water in Hospitals

2021 ◽  
Vol 12 (1) ◽  
pp. 12-23
Author(s):  
Michael Abbaszadeh ◽  
Mohammad Mosaferi ◽  
Parisa Firouzi ◽  
Mohammad Ali Abedpour ◽  
Samira Sheykholeslami
Keyword(s):  
Heavy Metals ◽  
Water Quality ◽  
Reverse Osmosis ◽  
National Standard ◽  
Microbial Quality ◽  
Dialysis Patients ◽  
Significant Difference ◽  
Before And After ◽  
East Azerbaijan ◽  
Dialysis Water

Abstract Background and Objectives: Water quality is important for preparation of dialysis solution due to its direct relationship with blood of patients with renal failure. The aim of this study was to evaluate the chemical and microbial quality of inlet and outlet water of dialysis devices in hospitals of East Azerbaijan province. Material and Methods: This study was a descriptive-analytical study in which the water of dialysis ward of three hospitals affiliated to East Azerbaijan University of Medical Sciences was investigated. The results of physicochemical (45 cases) and microbial (163 cases) of dialysis water were extracted from the relevant archives in two stages before and after reverse osmosis treatment during 2014-2016. Independent t-test and one-way ANOVA were used for statistical analysis while extracting descriptive statistical parameters. Data analysis was done using Excel and SPSS 23 software. Results: Evaluation of the efficiency of reverse osmosis system showed that there was a significant difference between water quality, before and after the system. Except for calcium, magnesium, fluoride and nitrate, the concentrations of other cations and anions in 100% of samples were lower than the European Pharmacopoeia standard. Incoming water samples to dialysis machine in 4.9% of cases had total coliform contamination and there was no fecal coliform in any of the samples. The frequency and frequency of tests in hospitals are not observed and despite the risk of heavy metals, heavy metals tests are not performed on dialysis water for the health of dialysis patients. Conclusion: The need to develop a national standard for controlling dialysis water, testing all quality parameters of dialysis water according to standards in regular times and timeframes, informing hospital managers and environmental health experts about the importance of dialysis water quality in health and increasing life expectancy of dialysis patients is felt.

Commercial special bread: Evaluation of texture, color, moisture content, water activity and nutritional labeling

2021 ◽  
Vol 11 (2) ◽  
pp. 158-162
Author(s):  
Rafaiane Macedo Guimarães ◽  
Lílian Moreira Costa ◽  
Osvaldo Resende ◽  
Mariana Buranelo Egea ◽  
Katiuchia Pereira Takeuchi
Keyword(s):  
Moisture Content ◽  
Water Activity ◽  
Wheat Flour ◽  
Local Market ◽  
Whole Wheat Flour ◽  
Whole Wheat ◽  
Significant Difference ◽  
Cielab System ◽  
Hue Angle ◽  
Bread Crust

Three types of special bread (WB: bread with whole-wheat flour, LWB: ‘light’ bread with whole-wheat flour, and MB: bread with multi-cereals) were purchased in the local market, and moisture content was analyzed as well as the following parameters water activity (aw), instrumental texture, and instrumental color of the bread (crust and crumb) using spectrophotometer with CIELab system (n=10). The chroma or C * value and the hue angle were also calculated. The labels of the bread were analyzed according to Resolution-RDC nº 360, which provides information about nutritional labeling of packaged foods. The three breads presented in their composition whole wheat flour and wheat fiber, which are indispensable ingredients for the loaves to be considered "special bread". The compression force applied to cause disruption in the bread was higher in WB (3.88 N) without significant difference with MB (3.79 N) and lower in LWB (2.85 N). The color parameters of the breads showed that WB was darker (lower value of L * = 34.44 in the crust) than the others.

Sign in / Sign up

Export Citation Format

Share Document