Tools for implementing smart specialization strategies in the European Union member states

Author(s):  
Khrystyna Prytula ◽  
Olha Demedyuk

The main tools for the formation and implementation of Innovation Policy and Cohesion Policy, which are used to achieve the priorities set in smart specialization strategies at the national and regional levels, are studied. The peculiarities of their use in the context of individual regions of the EU are analyzed, taking into account the trends and development needs of each individual region or country; depending on the selected areas of smart specialization; depending on the type of region according to the OECD classification by economic profile, etc. The most common tools for implementing smart specialization priorities are identified: supporting the functioning of clusters, improving business start-up procedures, public procurement, financial assistance, cooperation with other regions, creating various platforms to stimulate cooperation between enterprises, scientists and authorities, improving the training processes, etc. Two types of cluster policy are analyzed: funding support activities, such as cluster mapping and supporting cluster development, without identifying priority areas (such as the Czech Republic); support for certain areas of activity. Two types of public procurement are outlined: those that promote innovation, i.e. the purchase of direct results of innovation activities, and innovative, i.e. the purchase of an innovation process, the results of which are not yet presented on the market. Forms of providing financial assistance to economic entities in the development of innovations that use certain regions of the EU in their smart specialization strategies are given, including lending, subsidies, access to project funding programs, etc. The tools of regional innovative development in the context of traditional, new and experimental tools and their contribution to the generation, dissemination and use of knowledge are systematized. The active and passive tools for supporting the development of innovations in the field of small and medium business and the peculiarities of their use at the global, regional and micro levels are presented.

2019 ◽  
Vol 67 ◽  
pp. 06026
Author(s):  
Oleksii Klok ◽  
Olha Loseva ◽  
Oleksandr Ponomarenko

The article studies theoretical and methodological bases of the strategic management of the development of administrative territories, considers the essence of strategic management and formulates the advantages of using it in management of administrative territory. Based on the analysis of the key provisions of the EU regional policy, the strategy of “smart specialization” is considered as the most common approach to territorial development. Using the experience of the countries of the European Union as a basis, a BPMN diagram, describing the conceptual bases for the formation of a competitive territory strategy, was built. Practical approaches to the formation of strategies for the development of administrative territories operating in Ukraine, regulatory acts, in particular, that had a direct impact on the formation of the existing model of strategic territorial management, were analyzed. The main requirements to the content of the strategic plan were considered and the list of key provisions and analytical methods (socio-economic analysis, comparative analysis, SWOT-analysis, PESTLE-analysis, sociological analysis) was formulated. Using the comparative legal analysis of the experience of the European Union as a basis, a number of features can be highlighted that must be taken into account in the process of forming the administrative territory development strategy.


2020 ◽  
pp. 14-14
Author(s):  
Alexandre Almeida ◽  
Óscar Afonso ◽  
Mario Silva

The inability of the European Union (EU) to grow has raised questions regarding the effectiveness of competitiveness and growth policies. To increase efficacy, the EU has determined that regions must undergo an exercise in smart specialization and devise a strategy for the same. However, particularly in follower regions facing severe locked-in problems and structural bottlenecks, the application of smart specialization may require adjustments and a more dynamic vision, especially with regard to the follower regions. Furthermore, many operational issues arise in the programming and policy-devising stages. This article aims to contribute to this debate by proposing a framework to guide the selection of priorities and by applying the proposed framework to the Portuguese North region.


2022 ◽  
pp. 249-265
Author(s):  
İbrahim Tanju Akyol

The European Union (EU) provides financial assistance to the countries that are the current candidates and the potential candidates for the development of rural areas. These countries are supported by rural development (RD), one of the five components of the instrument for pre-accession assistance (IPA). Turkey is also a candidate country to benefit from the financial assistance provided by the EU. This research aims to reveal the situation of the projects carried out with IPARD in Çanakkale province within the country. As a matter of fact, Çanakkale takes place at the lower ranks in terms of the number of projects and the number of grants. Despite its potential, the reasons for not achieving the desired results in this province are the lack of qualified consultants, insufficient access to beneficiaries, and problems in licensing of lands. This research, thus, has also put forward various solution suggestions in order to minimize these problems.


2019 ◽  
Vol 11 (22) ◽  
pp. 6352 ◽  
Author(s):  
Stoffel ◽  
Cravero ◽  
La Chimia ◽  
Quinot

Strategic objectives in public procurement, such as environmental or social considerations, are being increasingly referred to under the umbrella term of sustainable public procurement (SPP). The concept of sustainability is intrinsically multidimensional, encompassing environmental, social, and economic aspects. However, the existing literature on SPP highlights the generalization that the regulation and practices of public procurement are biased toward the environmental dimension. There is conflicting evidence from countries in Sub-Saharan Africa (SSA) that calls for further investigation. Analyzing how SPP is actually constituted in SSA and contrasting it with the situation in the European Union (EU), as a spotlight on the Global South and North, contributes to a better understanding of sustainability in public procurement. The comparative analysis will help with understanding processes related to the integration or disintegration of sustainability dimensions in SPP. Our results indicate a contrary orientation on the environmental and the social dimensions in the EU and SSA. Although there is no sign of a comprehensive integration of all dimensions in SPP, there are developments toward the integration of the ‘missing’ dimension in the respective regional setting. Thus, at the moment, achieving a multidimensional implementation of SPP appears to be more a matter of expanding SPP practices of the ‘missing’ dimension than of pushing for integrated concepts.


2016 ◽  
Vol 14 (3) ◽  
pp. 537-558 ◽  
Author(s):  
Milos Milosavljevic ◽  
Nemanja Milanović ◽  
Slađana Benković

Public procurements are accounted for nearly one fifth of Gross Domestic Product in the European Union. Accordingly, the efficiency of public procurements has received immense attention of scholars and practitioners in the last few decades, particularly in the field of measuring a cross-country efficiency among the EU Member States. Nevertheless, the extant matrix is based solely on the outputs, thus capturing only a portion of determinants affecting the efficiency. Up to date, very little has been done in comparing the input-output efficiency. This paper aims to develop a set of input and output determinants of public procurement efficiency and compare the efficiency of public procurements of EU Member States. The results indicate that the efficiency based on input-output analysis significantly differs from any current analysis of procurement efficiency.


2020 ◽  
Vol 11 (1) ◽  
pp. 44-58
Author(s):  
G. A. Shcherbakov

Purpose: the main purpose of this article is to present and develop a cyclic approach in the theory of innovation. This section of economic theory is based on the understanding of the innovation process as a dynamic system that develops (depending on the type of innovation) within the medium or long-term cycle. The cyclic approach has an insufficiently studied subject of research. In theoretical and practical aspects, this approach is very poorly developed, despite its prospects for this method. The application of the cyclic approach in the practical sphere will increase the effectiveness of activities planning in the field of the state innovation policy, as well as increase the efficiency of the state resources using.Methods: a set of methods of theoretical research is used, including: logical, system and abstract methods, as well as specific scientific (special) research methods. Based on the study of a wide range of scientific literature, as well as statistical and factual information on innovative issues, models (modeling method) were drawn up, which were graphically fixed in the figures illustrating the main provisions of the article.Results: this article develops the cyclic approach to the innovations study, proposed in the works of foreign and domestic scientists. The article describes and presents a scientific method of innovative processes management, called "triad of innovative and transformative activity". The article also contains a brief overview of the cyclic method development in the works of domestic and foreign researchers, giving a general idea of the elaboration degree of the scientific question.Conclusions and Relevance: the analysis of the main theories and concepts in the field of innovation, gives reason to argue that scientific views on the implementation of the innovation process contain a serious omission. It consists in the fact that it does not take into account the influence of cyclical conditions of various medium-term cycle phases or long-term cycle stages. In practice, this leads to asynchronous processes that prevent the effective innovation activities.


2021 ◽  
Vol 104 (4) ◽  
pp. 107-118
Author(s):  
Darya Soldatenko ◽  

The article addresses correlation between the use of different intellectual property objects and the general goals of innovation policy of the EU. The subject of the research is industrial intellectual property along with trademarks and patents for inventions. The research period is limited to 2010‒2019. Based on the data from annual European innovation board and analysis of the dynamics of the activity of the EU member states in the field of intellectual property, the author identifies a group of EU countries that have the biggest potential in the use of the stipulated industrial property. It is show that trademark protection is mostly used in the medium and high-tech industries of the sample countries. However, there is a certain differentiation in the scale and dynamics of its application. Moreover, the author points out a high interest of the third countries such as USA, Japan and China in obtaining competitive advantages in the EU market through registration of a trademark in the European Union intellectual property office. The unified patent system in the EU is still at the preliminary stage as the most used national patent systems within the EU are the German and the French ones. The analysis demonstrates advantages of intellectual property systems in the Netherlands and Sweden. The author concludes that the successful implementation of the EU innovation policy through the creation of a system of exclusive industrial property rights is under way.


2020 ◽  
Vol 18 (4) ◽  
pp. 247-263
Author(s):  
Alla Ivashchenko ◽  
Anna Kornyliuk ◽  
Yevheniia Polishchuk ◽  
Tetiana Romanchenko ◽  
Iryna Reshetnikova

Regional development is related to the effective management of disruptive industries on the local level. In the European Union, the innovation regional development policy is based on a smart specialization strategy, which neighboring countries try to apply as well. In their regional strategies, they notice the goals which are designed within the Joint Research Center methodology. It allows revealing the most efficient industries in the region, leading to a new level of regional competence on the global level. The study aims to identify smart specialization priorities based on JRC methodology in certain Ukrainian regions and assess its applicability in emerging markets (Ukrainian case) and develop the set of recommendations considering the specificity of the national economy. The methodology is based on the static and dynamic analysis of economic (the indicators of the growth of average salaries and the number of employees indicators are calculated) and innovation (the indicators of productive, process, organizational, and marketing innovations are analyzed) potential of the region, which is examined in the article. It is revealed that the JRC methodology in identifying the smart specialization priorities has limited application in Ukraine. The restrictions related to the lack of data on innovations and other economic indicators. The analysis of certain regions shows what industries should be recommended as the priorities of smart specialization. However, discussions of the calculated results with the key stakeholders have differences which are not acceptable in the regional innovation policy development. As a result, the experts’ opinions are recommended to consider the priorities of different regions in Ukraine and other developing countries, which are on the path of smart specialization during stakeholders’ communication sessions.


2018 ◽  
Vol 1 (1) ◽  
pp. 52-61
Author(s):  
Tünde Tátrai

Understanding and implementing European public procurement directives does not mean that countries that joined the European Union at a later stage were immediately able to adjust to their logic. It is not necessarily a problem of skills; cumbersome and slow learning is due much more to cultural differences, and lack of practice and knowledge of the interpretation of law by the European Court of Justice. This article sums up the results of four surveys presenting the changes in Hungary’s public procurement culture over 10 years, which has a useful message for other more recent Member States.


2020 ◽  
Vol 99 (6) ◽  
pp. 153-162
Author(s):  
Vadim Tsirenshchikov ◽  

The article is dedicated to the industrial policy of the European Union and its official interpretation. It outlines the existing approaches to the formation of the conceptual structure of this policy, the main stages of its evolution, priorities, tools and measures of implementation, the main target areas of financing. The existing conventionalism of the EU activities designated to regulate the industrial sector in the capacity of an industrial policy is shown, a clarification of the concept of this policy is proposed. Such regulation today goes far beyond the sectoral framework and, extending to almost all spheres of the economy, acquires a cross-cutting general economic nature. Particular attention is paid to the latest version of industrial policy, which convincingly indicates an increase in the innovative trend in the area of economic activity referred to as industrial policy. There is a radical expansion of the range of its innovative priorities to ensure the formation of a regional innovation economy for sustainable development. As a result, this policy serves as an organic component of innovation policy. At the same time, the rapid updating of the proclaimed versions of the EU industrial policy definitely shows that it has become a tool for the implementation of urgent adjustments to the economic course in accordance with the objective requirements of modern development.


Sign in / Sign up

Export Citation Format

Share Document