ENHANCING THE DAYLIGHT AND ENERGY PERFORMANCE OF EXTERNAL SHADING DEVICES IN HIGH-RISE RESIDENTIAL BUILDINGS IN DENSE URBAN TROPICS

2021 ◽  
Vol 16 (3) ◽  
pp. 87-108
Author(s):  
Nadeeka Jayaweera ◽  
Upendra Rajapaksha ◽  
Inoka Manthilake
Keyword(s):  
Residential Buildings ◽  
Residential Building ◽  
Energy Performance ◽  
Simulation Software ◽  
Baseline Scenario ◽  
Building Model ◽  
High Rise ◽  
Lighting Energy ◽  
Shading Devices

ABSTRACT This study examines the daylight and energy performance of 27 external shading scenarios in a high-rise residential building in the urban tropics. The cooling energy, daytime lighting energy and the spatial daylight autonomy (sDA) of the building model were simulated in Rhino3D and Grasshopper simulation software. The best performance scenario (vertical and horizontal shading on the twentieth floor, horizontal shading only for the eleventh floor and no shading for the second floor) satisfied 75 sDA(300lx|50) with corresponding annual enery performance of 16%–20% in the cardinal directions. The baseline scenario, which is the current practice of providing balconies on all floors, reduced daylight to less than 75 sDA on the eleventh and second floor, even though it had higher annual enery performance (19%–24%) than the best performance scenario. Application of the design principles to a case study indicated that 58% of the spaces had over 75 sDA for both Baseline and Best performance scenarios, while an increase in enery performance of 1%–3% was found in the Best performance scenario compared to the Baseline.

scholarly journals Thermal Performance of a High-Rise Residential Building with Internal Courtyard in Tropical Climate

2018 ◽  
Vol 3 (7) ◽  
pp. 357
Author(s):  
Lobna Hassan Ali Hassan Elgheriani ◽  
Parid Wardi ◽  
AbdulBasit Ali Ali Ahmed
Keyword(s):  
Thermal Performance ◽  
Indoor Environment ◽  
Natural Ventilation ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Significant Feature ◽  
High Rise ◽  
Passive Design

Natural ventilation is an effectual passive design approach to create a better indoor thermal condition as well as energy efficiency. The primary goal of building design is providing a healthy and comfortable indoor environment titled as sustainable architecture. Literature suggests that the significant feature that alteration has to take place on for better energy performance is the envelope design. This paper aims to augment the Window to Wall Ratio (WWR), orientation and courtyard corridor size for improving the design of naturally ventilated courtyard high-rise residential buildings. Briefly, the findings indicate that contending with WWR, orientation and courtyard corridor size could increase the potential of improving its natural ventilation and thus, thermal performance.

Application of Water-Cooled Air-Conditioning for High-Rise Residential Buildings

2010 ◽  
Author(s):  
Hua Chen ◽  
Qianqian Di
Keyword(s):  
Energy Consumption ◽  
Empirical Model ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Energy Performance ◽  
Operation Performance ◽  
Air Conditioners ◽  
High Rise ◽  
Set Up

To improve the applicability of water-cooled air-conditioners in the domestic sector, the development of a prediction model for energy performance analysis is needed. This paper addressed the development of an empirical model for predicting the operation performance and the annual energy consumption for the use of water-cooled air-conditioners. An experimental prototype was set up and tested in an environmental chamber in validating the empirical model. The predictions compared well with the experimental results. Furthermore, a high-rise residential building whole-year energy consumption simulation on applications of water-cooled air conditioners in South china was also analyzed. The results show 20.4% energy savings over air-cooled units while the increase in water-side consumption is 31.1%. The overall energy savings were estimated at 16.2% when including the additional water costs.

Energy Consumption Simulation for Residential Buildings With Shading Devices in Different Regions

2007 ◽  
Author(s):  
Junjie Liu ◽  
Xiaojie Zhou ◽  
Zhihong Gao
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Energy Performance ◽  
Indoor Environments ◽  
Total Energy Consumption ◽  
South West ◽  
Shading Devices ◽  
Energy Consumption Simulation

With the development of energy saving, it is needed to calculate the energy consumption of the residential building, particularly accurate dynamic energy consumption. Fixed shading devices are wildly used to save building energy because they prevent undesirable heat coming through the windows during the “overheated period”, just as in summer, which can ameliorate the indoor environments and reduce the energy consumption of air-conditioning in summer. But they will also prevent solar energy which can be used in winter to enter windows. So it is very important to be able to determine the optimal shading devices of windows. The overhangs and vertical-shading devices are representative to study the different energy performance in summer and winter, in an actual dwell house. On the other hand, fixed shading devices can weaken the effect of daylighting, so we would take both the total energy consumption and rooms’ daylighting into account. In this study, we choose several typical dwelling houses in different cities located in north, south, west, east and central region of China respectively. We calculated energy consumption of those models by using Energyplus program, and compared the shading performance of horizontal and vertical shading devices, then optimal configuration dimensions of horizontal shading devices are recommended on the basis of different requirements for solar heat gains in winter and in summer for those typical dwelling houses.

scholarly journals A Study of Design Variables in Daylight and Energy Performance in Residential Buildings under Hot Climates

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5836
Author(s):  
Ali Mohammed AL-Dossary ◽  
Daeung Danny Kim
Keyword(s):  
Saudi Arabia ◽  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Total Energy Consumption ◽  
Design Variables ◽  
Slow Progress ◽  
Shading Devices

In Saudi Arabia, residential buildings are one of the major contributors to total energy consumption. Even though there are abundant natural resources, it is somewhat difficult to apply them to building designs, as design variables, due to slow progress and private issues in Saudi Arabia. Thus, the present study demonstrated the development of sustainable residential building design by examining the daylighting and energy performance with design variables. Focusing on the daylighting system, the design variables were chosen, including window-to-wall ratios (WWR), external shading devices, and types of glazing. The illuminance level by these design variables in a building was evaluated by using daylight metrics, such as spatial daylight autonomy and annual sunlight exposure. Moreover, the building energy consumption with these design variables was analyzed by using energy simulation. As a result, the daylighting was improved with the increase in WWRs and the tinted double glazing, while these design options can cause overheating in a residential building. Among types of glazing, the double pane windows with a low-E coating showed better energy performance. Based on the results, it is necessary to find the proper design variables that can balance the daylighting and energy performance in residential buildings in hot climates.

scholarly journals Energy saving strategy for residential buildings: case study in Armenia

2021 ◽  
Author(s):  
Atanes Papoyan ◽  
Changhong Zhan ◽  
Xueying Han ◽  
Guanghao Li
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Residential Buildings ◽  
Residential Building ◽  
Green Building ◽  
Simulation Software ◽  
Local Market ◽  
Green Technologies ◽  
Climate Conditions

Abstract In this article the research is concentrated on defining the possibility and potentials of design to enhance the energy efficiency and refine the climate conditions in the existing residential buildings in Armenia. The digital model of existing residential building is used to calculate the annual energy consumption, by simulation software—Autodesk Green Building Student. The horizontal solar panel systems offered by local market leaders were applied to calculate the annual savings, the required installation area, prices, etc. Consequently, the actual efficiency of energy saving technological process of residential buildings in Armenia is estimated. Based on the applied strategies and obtained fact, some recommendations are made for residential buildings. This article is intended to help and to be stimulus for architects and constructors to consider and include green technologies in their new projects.

scholarly journals Energy performance diagnosis for the residential building façade in Algeria

2021 ◽  
Author(s):  
Messaouda Rais ◽  
Adel Boumerzoug ◽  
Balint Baranyai
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Simulation Software ◽  
Efficient Design ◽  
Design Standards ◽  
Quality Performance ◽  
Performance Diagnosis

AbstractAs it is clear, worldwide buildings are the largest consumer of the final energy consumption. In Algeria, it has been reported that 33% of the overall energy consumption was attributed to buildings. This is due to the design and constructional techniques of the residential buildings, which do not address the local climatic condition. To assess this situation, the study is focused on analyzing the existing residential buildings in Algeria, in terms of energy, thermal, daylight, and indoor air quality performance, using a dynamic simulation software. Typical building design in a hot and dry climate was selected. The results revealed that the existing residential buildings do not comply with the energy-efficient design standards. It was concluded that further strategies should be applied in this sector, in terms of building design, materials, and façade configuration.

scholarly journals Customising Evacuation Instructions for High-Rise Residential Occupants to Expedite Fire Egress: Results from Agent-Based Simulation

Fire ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 21
Author(s):  
Michael Gerges ◽  
Peter Demian ◽  
Zulfikar Adamu
Keyword(s):  
Fire Safety ◽  
Residential Buildings ◽  
Residential Building ◽  
Simulation Software ◽  
Evacuation Time ◽  
Agent Based ◽  
High Rise ◽  
Safety Design ◽  
Fire Safety Design ◽  
Simulation Results

As the possibility of safe escape is one of the most crucial aspects of a building’s fire safety features, understanding of human behaviour under fire conditions is important for a successful evacuation. Although most of today’s buildings are equipped with fire safety systems, a fire can still occur at anytime and anywhere in a building and have devastating consequences. In the last decade, researchers and practitioners have used information technology to assist with fire safety design and emergency management. Building Information Modelling (BIM) is an exemplar process whose underpinning digital technology has been helpful for fire safety design, simulation, and analysis, but there is a lack of research on how BIM-based models combined with agent-based simulations can help improve evacuation via effective navigation and wayfinding in high-rise residential buildings. Customising evacuation instructions based on BIM, simulation results and occupant location, and delivery of these bespoke instructions to occupants’ smartphones during a fire emergency is relatively novel and research is needed to realise the potential of this approach. Therefore, this study investigates how customised evacuation instructions delivered to each occupant in a high-rise residential building could result in a faster evacuation during a fire incident. The research adopted a case study building and used Pathfinder (agent-based evacuation simulation software) to simulate evacuation from this eleven-floor high-rise residential building in Cairo, Egypt. Constraining evacuees (simulated agents in Pathfinder) to take particular exit routes was used as a proxy for delivering customised evacuation instructions to actual evacuees. Simulation results show that, in general, allowing the use of lifts for the benefit of disabled occupants could lead to their misuse by able-bodied occupants; evacuees would attempt to use the first visible point of exit regardless of how crowded it is. With optimally customised instructions, the evacuation time was, on average, 17.6 min (almost 50%) shorter than when the occupant’s choice of egress route was simulated based on standard path planning factors such as route length, nearby crowds and visible hazards. With evacuation instructions sent via smartphones, occupants could exit more rapidly via alternative routes. Such bespoke instructions were shown to reduce the adverse effects of crowdedness and uneven distribution of occupants along vertical and horizontal evacuation routes on evacuation time.

scholarly journals Evaluation of Daylight and Cooling Performance of Shading Devices in Residential Buildings in South Korea

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4749
Author(s):  
Taesub Lim ◽  
Woong Seog Yim ◽  
Daeung Danny Kim
Keyword(s):  
Energy Consumption ◽  
South Korea ◽  
Residential Buildings ◽  
Residential Building ◽  
Energy Performance ◽  
Main Concern ◽  
Design Strategies ◽  
Increasing Demand ◽  
Shading Devices ◽  
Design Options

Accounting for more than half of buildings in South Korea, the energy consumed by residential buildings has become a main concern and the cooing demand has rapidly increased. To reduce energy consumption, several passive and active design strategies have generally been applied. However, there has been an increasing demand for high window-to-wall ratios in residential buildings, it is imperative to block sunlight into a building effectively. Focusing on the reduction of cooling energy consumption in a residential building, the present study assessed the daylight and energy performance of shading devices. Among various types of shading devices, the Venetian blind, horizontal louver, light shelf, and egg-crate were selected. The illuminance levels in three different areas in a building were measured. In addition, the annual cooling energy consumption by these shading devices was investigated. As a result, both daylight and energy performance varied with different design options of these shading devices. Because of the slight performance difference among shading devices, the artificial loads of two best shading devices were compared. In sum, the egg-crate shading was the most proper shading device to block sunlight as well as reduce the cooling energy consumption effectively.

The Impact of High-Rise Residential Building Design Parameters on the Thermal and Energy Performance: A Literature Review

2019 ◽  
Vol 4 (11) ◽  
pp. 81
Author(s):  
Lobna Elgheriani ◽  
Brian Cody
Keyword(s):  
Thermal Performance ◽  
Residential Buildings ◽  
Publishing House ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Design Parameters ◽  
Future Research ◽  
High Rise ◽  
The Impact

Nowadays, high-rise buildings are developing very fast to cater to the increase in demand in major urban cities. This phenomenon has contributed to several environmental problems in both construction and operation. High-rise buildings design parameters seem to lack contextual environmental consideration. Evaluating the impact of such design parameters is a practical approach to enhance the overall energy and thermal performance. Existing research gaps are distinguished based on this review. Future research directions are also proposed through a methodological scheme to investigate comparatively, the effects of different geometric factors on both thermal and energy performance, specifically in the high-rise residential buildings with consideration to different climatic regions. Keywords: Energy Performance; Thermal Performance; High-rise Buildings; High-rise Residential BuildingseISSN: 2398-4287 © 2019. The Authors. Published for AMER ABRA cE-Bs by e-International Publishing House, Ltd., UK. This is an open access article under the CC BYNC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.DOI: https://doi.org/10.21834/e-bpj.v4i11.1717

Sign in / Sign up

Export Citation Format

Share Document