Thermal Properties and Fire Performance of Woven Glass Fibre Reinforced Nylon 6 Nano-Composites with Carbon Nanotubes

2008 ◽  
Vol 32 ◽  
pp. 9-12
Author(s):  
Shirley Zhiqi Shen ◽  
Stuart Bateman ◽  
Qiang Yuan ◽  
Mel Dell'Olio ◽  
Januar Gotama ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Thermal Properties ◽  
Ignition Time ◽  
Nylon 6 ◽  
Nano Composites ◽  
Fire Performance ◽  
Thermal Stabilities ◽  
Glass Fibre Reinforced

This paper presents the effects of incorporating carbon nanotubes (CNT) into nylon 6 on thermal properties and fire performance of woven glass reinforced CNT/nylon 6 nanocomposite laminates. Incorporation of CNT in nylon 6 improved the thermal stabilities, thermal conductivity and fire performance of laminates without compromising their mechanical properties. The thermal conductivity of laminates with 2 wt% CNT increased up to 42% compared to that without CNT. The ignition time and peak HRR time was delayed approx. 31% and 118%, respectively, in laminates with 4 wt% CNT in nylon 6 over that without CNT.

The effects of Clay on fire performance and thermal mechanical properties of woven glass fibre reinforced polyamide 6 nanocomposites

2010 ◽  
Vol 70 (14) ◽  
pp. 2063-2067 ◽  
Author(s):  
Shirley Zhiqi Shen ◽  
Stuart Bateman ◽  
Patrick McMahon ◽  
Mel Dell’Olio ◽  
Januar Gotama ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Glass Fibre ◽  
Polyamide 6 ◽  
Fire Performance ◽  
Thermal Mechanical Properties ◽  
Glass Fibre Reinforced

A NOVEL, SCALABLE PRODUCTION OF MULTIFUNCTIONAL NANOCOMPOSITE POLYMER FILAMENTS FOR ADDITIVE MANUFACTURING

2021 ◽  
Author(s):  
MIA CARROLA ◽  
AMIR ASADI
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Additive Manufacturing ◽  
Aqueous Suspension ◽  
Manufacturing Method ◽  
Nanocomposite Polymer ◽  
Water As Solvent ◽  
Materials Used ◽  
Scalable Production

Though a revolutionary process, additive manufacturing (AM) has left more to be desired from printed parts, specifically, improved interlayer strength and minimal defects such as porosity. To overcome these common issues, nanocomposites have become one of the most popular materials used in AM, with various nanoparticles used to achieve a variety of characteristics. The use of these technologies together allows for both to synergistically enhance the final printed parts by improving the process and products simultaneously. Here, we introduce a novel, scalable technique to coat ABS pellets with cellulose nanocrystal (CNC) bonded carbon nanotubes (CNT), to improve the adhesion between layers as well as the mechanical properties of printed parts. An aqueous suspension of CNT-CNC is used to coat ABS pellets before they are dried and extruded into filament for printing. The filament produced using this manufacturing method showed an increase in tensile and interlayer strength as well as improved thermal conductivity. This process uses water as solvent and pristine nanoparticles without the need for any functionalization or surfactants, promoting its scalability. This process has the potential to be used with various polymers and nanoparticles, which allows the materials to be specifically tailored to the end application, (i.e. strength, conductivity, antibacterial, etc.). These nanocomposite filaments have the potential to revolutionize the way that additive manufacturing is utilized in a variety of industries.

Evaluating Thermal Cycling Fatigue Resistance for LED Chip-on-Board Applications

2012 ◽  
Vol 2012 (DPC) ◽  
pp. 000706-000737
Author(s):  
Ravi M. Bhatkal ◽  
Ranjit Pandher ◽  
Anna Lifton ◽  
Paul Koep ◽  
Hafez Raeisi Fard
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Cycle ◽  
Metal Core ◽  
Creep Fatigue ◽  
Cte Mismatch ◽  
Thermal Cycling Fatigue ◽  
Transient Thermal ◽  
The Impact

LED chip-on-board applications typically involve assembling an LED die stack directly on to a high thermal conductivity substrate such as a Metal Core PCB. If solder is used for die-substrate attach for such chip-on-board applications, one needs to consider the CTE mismatch between the die stack and the MCPCB and its impact on thermal cycle-induced creep fatigue of the solder material. This paper presents a methodology to compare relative performance of different solder materials with varying thermo-mechanical properties, and compare the impact of CTE mismatch and temperature swings on transient thermal properties and relative reliability of the solder attach materials. Implications for LED chip-on-board applications are discussed.

Thermal properties of pillared-graphene nanostructures

2015 ◽  
Vol 1727 ◽  
Author(s):  
M. Rifu ◽  
K. Shintani
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Molecular Dynamics ◽  
Thermal Properties ◽  
Molecular Dynamics Simulation ◽  
Dynamics Simulation ◽  
Nonequilibrium Molecular Dynamics ◽  
Nonequilibrium Molecular Dynamics Simulation ◽  
Thermal Conductivities ◽  
Graphene Nanostructures

ABSTRACTThe thermal conductivities of pillared-graphene nanostructures (PGNSs) are obtained using nonequilibrium molecular-dynamics simulation. It is revealed their thermal conductivities are much smaller than the thermal conductivities of carbon nanotubes (CNTs). This fact is explained by examining the density of states (DOS) of the local phonons of PGNSs. It is also found the thermal conductivity of a PGNS linearly decreases with the increase of the inter-pillar distance.

Effect of extrusion treatment on mechanical, thermal conductivity and corrosion resistance of magnesium alloys

2019 ◽  
Vol 9 (5) ◽  
pp. 405-412
Author(s):  
Bo Zhang ◽  
Huichao Jia ◽  
Quanyong Lian ◽  
Lianyu Jiang ◽  
Guangxin Wu
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Thermal Properties ◽  
Magnesium Alloys ◽  
Driving Force ◽  
Mechanical Performance ◽  
Cast Alloy ◽  
Extrusion Temperature ◽  
Zr Alloys

The effect of extrusion treatment on the mechanical, thermal and corrosion resistance of Mg–La–Zn–Zr alloys were presented. It is suggested that the amount of recrystallized grains played a major role in both mechanical properties and thermal properties. It should be noted the as-cast alloy shows the best thermal conductivity reached the value about 137.507 W/(m · K), however, the mechanical performance of magnesium alloys does not reach the expected results. The thermal properties of extruded alloys have slightly decreased and then increased with the increase of extrusion temperature. Then the tensile properties of Mg–La–Zn–Zr were significantly improved after extrusion treatment. Furthermore, with the increase of extrusion temperature, the elongation-to-fracture increased substantially. After extrusion treatment, the corrosion driving force of the alloy decreases, which reduces the corrosion tendency of the magnesium alloy. The alloy presented in this paper is expected to be applied in industry.

Preparation and Characterization of GNP/Nylon Composites

2014 ◽  
Vol 556-562 ◽  
pp. 339-342 ◽  
Author(s):  
Bao Feng Xu ◽  
Zhi Dan Lin ◽  
Jiang Ming Chen ◽  
Jun Lin
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Graphene Nanoplatelets ◽  
Melt Blending ◽  
Blending Method

Graphene nanoplatelets (GNP) and nylon (PA) have been often used as thermal filler and matrix and respectively to produce composites. In this work, PA6/PA66/GNP thermal composites were prepared via a melt blending method. Mechanical properties, morphology, and thermal properties of PA6/PA66/GNP composites were investigated. Because the GNP is very expensive, we investigated to use Al2O3 and graphite and examined the characteristics of the prepared composites. Thermal conductivity values of PA6/PA66/GNP composites remarkably increased with increase of GNP contents mainly via layered dispersion in nylon matrix. The thermal conductivity of composite containing 50 wt % of GNP was measured as 5.03 W·m–1·K–1 at 30 °C, indicating an increase of more than 15 times compared with that of the neat PA6. When the Al2O3 was replaced for GNP, the thermal conductivity of composites decreased, but the mechanical properties improved. When graphite was used to replace for GNP, thermal conductivity basically remained unchanged but mechanical properties decreased.

Sign in / Sign up

Export Citation Format

Share Document