IoT-based sound-level control for audio amplifiers: mosques as a case study

<p><span>When using audio-amplifiers in the open, uneven distribution of sound makes people unpleasant because it is loud or unheared. This unfortunate situation arises because audio-amplifiers volumes are set according to the guess of sound technicians. Mosques, as an example, are distributed inside wide areas and fire Azan five times a day. Due to the relatively long distances between them, speed and direction of the wind impose setting sound levels prior to each Azan such that all the area is covered and the overlap is minimized. In this paper, we propose a system based on internet of things (IoT) model to control the sound level of each mosque in the community. An IoT device (one in a mosque) sets the level of sound fired by the audio-amplifier. To do that, a synchronized series of tones is fired from each node. Once a node hears these tones, the process of sound level control starts to indicate the distances to heared nodes. As the approximate distances between nodes are known, each node can calculate its suitable sound level. Results showed that the proposed system is effective in setting sound levels for mosques audio amplifiers.</span></p>

Open-Loop Class-BD Audio Amplifiers with Balanced Common-Mode Output

This paper presents new architectures and implementations of original open-loop Class-BD audio amplifiers with balanced Common-Mode output. The output stage of each proposed amplifier includes the typical H-bridge with four MOSFETs and four additional MOSFET switches that balance and keep the Common-Mode output constant. The presented amplifiers employ the extended NBDD PWM or PSC PWM modulation scheme. When the output stage is built only on NMOSFET transistors, gate drivers require a floating power supply, using a self-boost charge pump with capacitive isolation of the control signal. The use of complementary MOSFETs in the output stage greatly simplifies gate control systems. The proposed amplifiers were compared to the typical Class-BD configuration, using the optimal NBDD modulation with respect to audio performance of the Differential-Mode (DM) and Common-Mode (CM) outputs. Basic SPICE simulations and experimental studies have shown that the proposed Class-BD amplifiers have similar audio performance to the prototype with the optimal NBDD modulation scheme, while at the same time having a balanced constant voltage CM output, thus eliminating the main contributor to radiation emission. As a result, the filtering of the DM output signals can be greatly simplified, while the filtering of the CM output signals can be theoretically eliminated. Practically, due to the timing errors added by the gate drivers, spikes are generated at the CM output, which are very easy to filter out by the reduced LC output filter, even at very low L.

Review of Isolated Matrix Inverters: Topologies, Modulation Methods and Applications

This paper presents a review of isolated matrix inverters. The study contributes to creating a point of reference for a comprehensive classification of existing solutions. Over 30 topologies were reviewed, and the main advantages and disadvantages discussed. Applications of isolated matrix inverters are summarized in a tabular form to demonstrate their flexibility for different power and voltage levels achieved due to the presence of a transformer. These inverters have been proposed for the uninterruptible power supplies, high and low-voltage/power photovoltaic systems, low-power fuel cell, different low- and high-voltage battery and/or electric vehicle chargers, audio amplifiers. The fully controlled switches on both terminals of these converters typically can provide the bidirectional power transfer capability, which is also addressed for most of the topologies, but requires some modification in their modulation strategy. Average efficiency of today’s isolated matrix inverters is comparable with the two-stage power converters; however, they can provide higher reliability and lower cost.