Effect of Cl- and Na+ ratios in nutrient solutions on tomato (Solanum lycopersicum L.) yield in a hydroponic system

Intensive tomato (Solanum lycopersicum L.) production in coastal areas of Sinaloa is exposed to significant amounts of Cl and Na deposited by sea breezes and irrigation water, which affects the yield of this vegetable. The aim of this study was to evaluate three percentage ratios of Cl-/anions (25/100, 50/100 and 75/100) and three percentage ratios of Na+/cations (25/100, 50/100 and 75/100) in the nutrient solution on mineral composition, dry matter production and yield of tomato. The experimental design was completely randomized with a 32 factorial arrangement and four replications. Analysis of variance and mean comparisons were performed (Tukey, P ≤ 0.05). Cl and Na concentrations in tomato leaves, stems and fruits increased significantly with increasing ratios of Cl-/anions and Na+/cations in the nutrient solution. The 75/100 Cl-/anions ratio reduced (P ≤ 0.05) the Ca concentration in leaves, while the 75/100 Na+/cations ratio decreased (P ≤ 0.05) K concentrations in leaves and stems. Both ratios reduced aerial dry biomass (48 and 25.8 %, respectively) and tomato yield (50.8 and 45.7 %, respectively). The results indicate that tomato plants grown with the 75/100 percentage ratio of Cl-/anions or the 75/100 percentage ratio of Na+/ cations absorb excessive amounts of Cl or Na, which causes ionic imbalance (especially of K+ and Ca2+) and affects dry matter production and yield.

ON INFLUENCE OF GENERAL AND SPECIAL PHYSICAL TRAINING ON PROCESS OF STAGE TRAINING OF ATHLETES

The article is devoted to a study on the impact of general and special physical training on the process of stage training of athletes. The author analyzed the development of the process of training athletes in the context of physical culture and sports. The article analyzes and discloses the main tasks of general physical training and the dynamics of passing the standards of the OFP and SFP at the stages of sports training, in accordance with the requirements of the FSSP in percentage ratio for three years. In the article, the author gives a generalized characteristic of the basis for the education of physical qualities and for the physical training of the athlete, resulting from specific laws of sports improvement. In general, the author concludes that one of the main features is that the athlete’s physical training organically combines her two sides of general and special physical training. Thus, in general, the use of the described techniques can be useful to physical education teachers and sports coaches in order to increase the professional training of teachers.

Study of the energy supply of muscular activity in the Cooper test among sportsmen-gamers according to the individual heart rate response to the load

In this study, using the example of the Cooper test, pulse zones were identified in percentage ratio, which allow indirectly judging the contribution of a particular energy supply system for each athlete during cyclic work. Keywords: Cooper's test, energy supply, athletes-game players, pulse zones, heart rate monitoring, Polar.

Activity of the Prosecutor's Office of Khakass Autonomous Oblast in the 1960s (based on archival materials)

Leaning on the archival materials, this article examines the work of the Prosecutor's Office of Khakass Autonomous Oblast in the 1960s, as well as highlights positive and negative aspects therein. The object of this research is the Soviet Prosecutor's Office. The subject is the activity of the Prosecutor's Office of Khakass Autonomous Oblast in the 1960s. Archival sources contain meeting protocols, briefing notes on the work of city and district prosecutor's offices of Khakass Autonomous Oblast, internal reports on the work of the prosecutor's office, etc. The article employs the historical-comparative method for studying the types of activity of district prosecutor’s offices of Khakass Autonomous Oblast and criminal situation in these districts; quantitative methods for tracing the amount of crime, percentage ratio, number of cases, etc.; systemic-functional method for consideration of tasks faced by the prosecutor's office. The main types of activity in the 1960’s indicate oversight activity, crime prevention, legal propaganda, monitoring the execution of the decrees of the Prosecutor General of the Soviet Union, participation of the prosecutors in court hearings, consideration and resolution of citizens’ complaints.

High-Pressure-Induced Sublethal Injuries of Food Pathogens—Microscopic Assessment

High Hydrostatic Pressure (HHP) technology is considered an alternative method of food preservation. Nevertheless, the current dogma is that HHP might be insufficient to preserve food lastingly against some pathogens. Incompletely damaged cells can resuscitate under favorable conditions, and they may proliferate in food during storage. This study was undertaken to characterize the extent of sublethal injuries induced by HHP (300–500 MPa) on Escherichia coli and Listeria inncua strains. The morphological changes were evaluated using microscopy methods such as Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Epifluorescence Microscopy (EFM). The overall assessment of the physiological state of tested bacteria through TEM and SEM showed that the action of pressure on the structure of the bacterial membrane was almost minor or unnoticeable, beyond the L. innocua wild-type strain. However, alterations were observed in subcellular structures such as the cytoplasm and nucleoid for both L. innocua and E. coli strains. More significant changes after the HHP of internal structures were reported in the case of wild-type strains isolated from raw juice. Extreme condensation of the cytoplasm was observed, while the outline of cells was intact. The percentage ratio between alive and injured cells in the population was assessed by fluorescent microscopy. The results of HHP-treated samples showed a heterogeneous population, and red cell aggregates were observed. The percentage ratio of live and dead cells (L/D) in the L. innocua collection strain population was higher than in the case of the wild-type strain (69%/31% and 55%/45%, respectively). In turn, E. coli populations were characterized with a similar L/D ratio. Half of the cells in the populations were distinguished as visibly fluorescing red. The results obtained in this study confirmed sublethal HHP reaction on pathogens cells.

The Role of Sintering Temperature and Dual Metal Substitutions (Al3+, Ti4+) in the Development of NASICON-Structured Electrolyte

The aim of this study is to synthesize Li1+xAlxTixSn2−2x(PO4) sodium super ion conductor (NASICON) -based ceramic solid electrolyte and to study the effect of dual metal substitution on the electrical and structural properties of the electrolyte. The performance of the electrolyte is analyzed based on the sintering temperature (550 to 950 °C) as well as the composition. The trend of XRD results reveals the presence of impurities in the sample, and from Rietveld Refinement, the purest sample is achieved at a sintering temperature of 950 °C and when x = 0.6. The electrolytes obey Vegard′s Law as the addition of Al3+ and Ti4+ provide linear relation with cell volume, which signifies a random distribution. The different composition has a different optimum sintering temperature at which the highest conductivity is achieved when the sample is sintered at 650 °C and x = 0.4. Field emission scanning electron microscope (FESEM) analysis showed that higher sintering temperature promotes the increment of grain boundaries and size. Based on energy dispersive X-ray spectroscopy (EDX) analysis, x = 0.4 produced the closest atomic percentage ratio to the theoretical value. Electrode polarization is found to be at maximum when x = 0.4, which is determined from dielectric analysis. The electrolytes follow non-Debye behavior as it shows a variety of relaxation times.

Faience Waste for the Production of Wall Products

Increasing the efficiency of using gypsum binders can be carried out by using not natural gypsum raw materials, but calcium sulfate-containing waste from various industries (phosphogypsum, borogypsum, citrogypsum, etc.). As the main source material in the work, we used gypsum-containing waste from a faience factory in the form of waste molds for casting dishes, souvenirs and plumbing fixtures. It has been established that the optimal binding system is formed by mixing powders of dihydrate technogenic gypsum from a coarse and fine earthenware factory with average particle diameters of 3.473 microns and 3.065 microns in a percentage ratio of 30:70, respectively. Using a computer software developed by the authors, which makes it possible to simulate the microstructure of a raw mixture taking into account the contact interaction of particles and calculate the average coordination number, models of binary packing of particles were constructed at various ratios of their diameters. Studies of the strength of composites obtained on the basis of bidisperse systems have shown the presence of an extremum in the region of mixtures containing 30% coarse powder. With optimal packing, a large number of phase contacts are formed due to the regulation of the grain composition of the bidisperse system. It was revealed that a brick based on the waste of two-water gypsum from earthenware production has 2.5–5 times better characteristics of compressive strength than traditional building wall products based on natural gypsum. At the same time, the strength immediately after molding is more than 3 times higher than that of traditional gypsum products. Even higher indicators are achieved when adding microcalcite in addition to the waste of earthenware production, in this case, the compressive strength is 3–6 times higher, and the strength immediately after molding is almost 3 times higher than that of traditional gypsum products.

The effect of curing on compressive strength of geo-polymer mortar made rice straw ash, fly ash, and laterite soil

This study aims to analyze the effect of curing on the compressive strength of geopolymer mortar made from straw ash, fly ash and laterite soil. This research is experimental in the laboratory. Geopolymer mortar was produced using straw ash, fly ash and laterite soil with a percentage ratio of 16.67: 41.67: 41.67. The alkaline activator used is sodium hydroxide (NaOH) with a concentration of 12 M. The compressive strength test of 5 × 10 cm cylinders is used to evaluate the geopolymer mortar mixture produced at the age of 3, 7 and 28 days with curing, namely air and water curing. The results showed that the compressive strength of the geopolymer mortar increased along with the increasing age of each curing. The compressive strength values produced in air curing 3, 7 and 28 days were respectively 1.64 N/mm2, 1.72 N/mm2 and 3.22 N/mm2. While water curing, the resulting compressive strength values for each curing are 1.03 N/mm2, 1.63 N/mm2 and 1.68 N/mm2. At the ages of 3, 7 and 28 days, there was an increase in the compressive strength values from water curing to air curing, which were 0.37%, 5.23% and 47.82%, respectively. It can be seen that the compressive strength of the geopolymer mortar made from straw ash, fly ash and laterite soil in air curing is greater than that of water curing.

Automated Detection of Bilingual Obfuscated Abusive Words on Social Media Forums: A Case of Swahili and English Texts

The usage of social media has exponentially grown in recent years leaving the users with no limitations on misusing the platforms through abusive contents as deemed fit to them. This exacerbates abusive words exposure to innocent users, especially in social media forums, including children. In an attempt to alleviate the problem of abusive words proliferation on social media, researchers have proposed different methods to help deal with variants of the abusive words; however, obfuscated abusive words detection still poses challenges. A method that utilizes a combination of rule based approach and character percentage matching techniques is proposed to improve the detection rate for obfuscated abusive words. The evaluation results achieved F1 score percentage ratio of 0.97 and accuracy percentage ratio of 0.96 which were above the significance ratio of 0.5. Hence, the proposed approach is highly effective for obfuscated abusive words detection and prevention. Keywords: Rule based approach, Character percentage matching techniques, Obfuscated abuse, Abuse detection, Abusive words, Social media

Text Classification on the Instagram Caption Using Support Vector Machine

Instagram is one of the world’s top ten most popular social networks. Instagram is the most popular social networking platform in the United States, India, and Brazil, with over 1 billion monthly active users. Each of these countries has more than 91 million Instagram users. The number of Instagram users shows the various reasons and goals for them to play this social media. Social Media Marketing does not escape being one of the purposes of using Instagram, with benefits to place a market for their products. Using text classification to categorize Instagram captions into organized groups, namely fashion, food & beverage, technology, health & beauty, lifestyle & travel, this paper is expected to help people know the current trends on Instagram. The Support Vector Machine algorithm in this research is used in 66171 post captions to classify trending on Instagram. The TF-IDF (Term Frequency times Inverse Document Frequency) method and percentage variations were used for data separation in this study. This study result indicates that the use of SVM with a percentage ratio 70% of dataset for training and 30% of dataset for testing produces a higher level of accuracy compared to the others.