Consistency evaluation of lung adenocarcinoma tissue and circulating tumor cells related gene mutation detection based on multi-site immunomagnetic beads

This study was designed to investigate the feasibility of genetic testing using circulating tumor cells (CTCs) instead of tumor tissues in lung adenocarcinoma to break through its limitation. Separation system for epithelial cell adhesion molecule (EpCAM), epidermal growth factor receptor (EGFR), and Vimentin expressing CTCs was constructed and used to capture CTCs in the blood samples of 57 patients with lung adenocarcinoma. Genetic mutations of genes involved in targeted therapies were detected by next-generation sequencing (NGS) in tissues from these patients. Blood CTC samples with the gene mutations identified by tissue-NGS were selected and corresponding gene mutations were detected by Sanger sequencing. The specificity of the CTC separation system was 95.48% and the sensitivity was 90.85%. The average number of CTCs in the blood of patients with lung adenocarcinoma was 12.47/7.5 mL. Comparison of the tissue-NGS with the CTC-Sanger sequencing showed that the consistencies of genetic mutations of EGFR ( n = 24), KRAS ( n = 9), TP53 ( n = 19), BRAF ( n = 1), ERBB2 ( n = 2), and PIK3CA ( n = 3) were 92.31%, 75.00%, 86.36%, 50.00%, 66.67%, and 75.00%, with an overall consistency of 84.06%. The CTC separation system established in this study shows high specificity and sensitivity. CTCs can be used as a suitable alternative to tumor tissues that are difficult to obtain in clinical practice and overcome the difficulties in tumor tissue collection, which is of significance in guiding clinical medication and individualized treatment with significant clinical application value in terms of genetic testing for targeted therapies in tumor treatment.

In vitro drug release and antibacterial activity evaluation of silk fibroin coated vancomycin hydrochloride loaded poly (lactic-co-glycolic acid) (PLGA) sustained release microspheres

Currently, the treatment of osteomyelitis poses a great challenge to clinical orthopedics. The use of biodegradable materials combined with antibiotics provides a completely new option for the treatment of osteomyelitis. In this study, vancomycin hydrochloride (VANCO) loaded poly (lactic-co-glycolic acid) (PLGA) microspheres were prepared by a double emulsion solvent evaporation method, and the in vitro drug release behaviors of the drug loaded microspheres were explored after coating with different concentrations of silk fibroin (SF). Drug loading, encapsulation efficiency, Scanning electron microscopy, particle size analysis, Fourier transform infrared spectroscopy, hydrophilicity, in vitro drug release, and in vitro antibacterial activity were evaluated. The results showed that the drug loading of vancomycin loaded PLGA microspheres was (24.11 ±1.72)%, and the encapsulation efficiency was (48.21 ±3.44)%. The in vitro drug release indicated that the drug loaded microspheres showed an obvious initial burst release, and the drug loaded microspheres coated with SF could alleviate the initial burst release in varying degrees. It also can reduce the amount of cumulative drug release, and the effect of microspheres coated with 0.1% concentration of SF is the best. The time of in vitro drug release in different groups of drug loaded microspheres can be up to 28 days. The microspheres coated with (0.1%SF) or without (0%SF) SF showed a cumulative release of (82.50±3.51)% and (67.70±3.81)%,respectively. Therefore, the surface coating with SF of vancomycin loaded microspheres can alleviate the initial burst release, reduce the cumulative drug release, potentially prolong the drug action time, and improve the anti-infection effect.

In vitro evaluation of freeze-drying chitosan-mineralized collagen/Mg–Ca alloy composites for osteogenesis

Magnesium (Mg) alloy with good mechanical properties and biodegradability is considered as one of the ideal bone repair materials. However, the rapid corrosion of Mg-based metals can pose harm to the function of an implant in clinical applications. In this study, micro-arc oxidation coating was prepared on the surface of the Mg–Ca matrix, then the chitosan and mineralized collagen (nano-hydroxyapatite/collagen; nHAC) were immobilized on the surface of the MAO/Mg–Ca matrix to construct the CS-nHAC/Mg–Ca composites of different component proportions (the ratio of CS to nHAC is 2:1, 1:1, and 1:2, respectively). The corrosion resistance, osteogenic activity, and angiogenic ability were extensively investigated. The results indicated that the CS-nHAC reinforcement materials can improve the corrosion resistance of the Mg matrix significantly and promote the proliferation and adhesion of mouse embryo osteoblast precursor cells (MC3T3-E1) and human umbilical vein endothelial cells (HUVECs). In addition, the CS-nHAC/Mg–Ca composites can not only promote the alkaline phosphatase (ALP) activity and extracellular matrix mineralization of MC3T3-E1 cells but also enhance the migration motility and vascular endothelial growth factor (VEGF) expression of HUVECs. Meanwhile, the 2CS-1nHAC/Mg–Ca composite exhibited the optimum function characteristics compared with other samples. Therefore, considering the improvement of corrosion resistance and biocompatibility, the CS-nHAC/Mg–Ca composites are expected to be a promising orthopedic implant.

Rheological and textural analysis as tools for investigation of drug-polymer and polymer–polymer interactions on the example of low-acyl gellan gum and mesalazine

Purpose. In the performed study, the rheological and textural parameters of gellan-based hydrogels were investigated and their dependence on three factors was taken into consideration: ( i) The presence of the model drug, ( ii) The presence and type of the ionic crosslinking agent, and ( iii) the composition of the polymer network. The objective was to compare two analytical methods, regarded as complementary, and define to what extent the obtained results correlate with each other. Methods. The hydrogels contained low-acyl gellan gum or its mixtures with hydroxyethyl cellulose or κ-carrageenan. CaCl2 and MgCl2 were used as gelling agents. Mesalazine was used as a model drug. The rheological analysis included oscillatory stress and frequency sweeping. The texture profile analysis was performed to calculate texture parameters. Results. Placebo gels without the addition of gelling agents had the weakest structure. The drug had the strongest ability to increase the stiffness of the polymer network. The weakest structure revealed the placebo samples without the addition of gelling agents. Texture analysis revealed no significant influence of the drug on the strength of the gels, while rheological measurements indicated clear differences. Conclusions. It can be concluded that in the case of some parameters methods correlate, that is, the effect related to gelling ions. However, the rheological analysis seems to be more precise and sensitive to some changes in the mechanical properties of the gels.

Nanostructured-lipid carriers-Chitosan hydrogel beads carrier system for loading of resveratrol: A new method of topical application

The aim of this study was to develop nanostructured-lipid carriers (NLC) encapsulated by Chitosan hydrogel beads for the efficient topical carrier. Dynamic light scattering (DLS), X-ray diffraction (XRD), Differential scanning calorimetry (DSC), and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were conducted to study the influence of the encapsulation on the characteristic of resveratrol-loaded NLC, and the results showed that there was no impact on resveratrol-loaded NLC. Chitosan hydrogel beads could significantly improve the physical stability of resveratrol-loaded NLC. In vitro release study revealed that resveratrol-loaded NLC-Chitosan hydrogel beads had a more significant sustained-release effect on resveratrol. In vitro transdermal studies suggested that the skin permeation of resveratrol was promoted by the effect of Chitosan hydrogel beads and increased resveratrol distribution in the skin. In vitro cytotoxicity showed that resveratrol-loaded NLC-Chitosan hydrogel beads did not exert a hazardous effect on L929 cells. Hence, NLC-Chitosan hydrogel beads might be a promising method for topical applications of resveratrol.

Biomedical applications of tannic acid

Tannic Acid (TA) is a naturally occurring antioxidant polyphenol that has gained popularity over the past decade in the field of biomedical research for its unique biochemical properties. Tannic acid, typically extracted from oak tree galls, has been used in many important historical applications. TA is a key component in vegetable tanning of leather, iron gall ink, red wines, and as a traditional medicine to treat a variety of maladies. The basis of TA utility is derived from its many hydroxyl groups and its affinity for forming hydrogen bonds with proteins and other biomolecules. Today, the study of TA has led to the development of many new pharmaceutical and biomedical applications. TA has been shown to reduce inflammation as an antioxidant, act as an antibiotic in common pathogenic bacterium, and induce apoptosis in several cancer types. TA has also displayed antiviral and antifungal activity. At certain concentrations, TA can be used to treat gastrointestinal disorders such as hemorrhoids and diarrhea, severe burns, and protect against neurodegenerative diseases. TA has also been utilized in biomaterials research as a natural crosslinking agent to improve mechanical properties of natural and synthetic hydrogels and polymers, while also imparting anti-inflammatory, antibacterial, and anticancer activity to the materials. TA has also been used to develop thin film coatings and nanoparticles for drug delivery. In all, TA is fascinating molecule with a wide variety of potential uses in pharmaceuticals, biomaterials applications, and drug delivery strategies.

Electrospun Polycaprolactone (PCL)-Amnion Nanofibrous Membrane Promotes Nerve Repair after Neurolysis

Peripheral nerve adhesion after neurolysis leads to nerve dysfunction, limiting nerve regeneration and functional recovery. We previously developed an electrospun polycaprolactone (PCL)-amnion nanofibrous membrane for preventing adhesion formation. In this study, we investigated the effect of protective nerve wrapping and promoting nerve regeneration in a rat sciatic nerve compression model. A total of 96 SD rats after sciatic nerve chronic compression were randomly divided into three groups: the PCL-amniotic group, in which nerves were wrapped with a PCL-amniotic membrane for treatment; the chitosan group, in which nerves were wrapped with a clinically used chitosan hydrogel; the control group, which involved neurolysis alone without treatment. Twelve weeks postoperatively, the nerve regeneration was evaluated by general and ultrastructure observation, as well as the expressions of neuronal regeneration and inflammatory reaction biomarkers. The nerve functions were assessed with gastrocnemius muscle measurement, hot-plate test, and walking track analysis. Compared with the chitosan hydrogel, the PCL-amnion nanofibrous membrane significantly reduced peripheral nerve adhesion and promoted nerve regeneration. The morphological properties of axons in the nerve wrap group were preserved. Intraneural macrophage invasion, as assessed by the number of CD68-positive cells, was less severe in the PCL-amnion group than in the other groups. Additionally, the gastrocnemius muscle weight and muscle bundle area were significantly higher in the PCL-amnion group than those in the chitosan group. The abilities of sense and movement of the rats in the PCL-amnion group were significantly improved compared to the other groups. In summary, electrospun PCL-amnion nanofibrous membranes effectively prevented post-neurolysis peripheral nerves from developing adhesion, whereas promoted nerve repair and regeneration, which make PCL-amnion nanofibrous membranes a promising biomaterial for clinical application.

Poly (ε-caprolactone)/Poly (lactic acid) fibers produced by rotary jet spinning for skin dressing with antimicrobial activity

The rotary jet spinning technique permits the production of biomaterials that can be used as devices that come into contact with biological systems (including biological fluids) for diagnostic or surgical applications. These materials are composed of synthetic or natural compounds and allow the incorporation of drugs for therapeutic purposes. Two solutions containing 50% poly(lactic acid) (PLA) and 50% poly(ε-caprolactone) (PCL) diluted in three different solvents were prepared for rotary jet spinning (RJS) process. Vancomycin, an antibiotic indicated for the treatment of severe staphylococcal infections in patients with penicillin allergy, was added in the polymer solutions, to obtain drug-loaded fibrous mats. Morphological surface characterization by scanning electron microscopy revealed heterogeneous pores in the microfibers. Vancomycin loading interfered with the morphology of all samples in terms of fiber size, leading to smaller diameter fibers. Attenuated total reflectance/Fourier transform infrared spectroscopy was used for identification of the samples. The vibrational characteristics of PCL/PLA and vancomycin were consistent with expectations. Vero cell culture assays by the extract dilution and direct contact methods revealed the absence of cytotoxicity, except for the sample prepared with 50% of PCL and of a 9/2 (V/V) vancomycin content, with the growth of confluent and evenly spread cells on the fibrous mats surface. Microbiological analysis, performed on Staphylococcus aureus by the halo inhibition test and by the broth dilution method, showed that the antibacterial activity of vancomycin was maintained by the loading process in the polymer fibers. The results showed that rotary jet spinning produces satisfactory amounts of Vancomycin-loaded fibers, as potential web dressing for wound repair

Lipid-mediated biosynthetic labeling strategy for in vivo dynamic tracing of avian influenza virus infection

Monitoring the infection behavior of avian influenza viruses is crucial for understanding viral pathogenesis and preventing its epidemics among people. A number of viral labeling methods have been utilized for tracking viral infection process, but most of them are laborious or decreasing viral activity. Herein we explored a lipid biosynthetic labeling strategy for dynamical tracking the infection of H5N1 pseudotype virus (H5N1p) in host. Biotinylated lipids (biotinyl Cap-PE) were successfully incorporated into viral envelope when it underwent budding process by taking advantage of host cell-derived lipid metabolism. Biotin-H5N1p virus was effectively in situ–labeled with streptavidin-modified near-infrared quantum dots (NIR SA-QDs) using streptavidin-biotin conjugation with well-preserved virus activities. Dual-labeled imaging obviously shows that H5N1p viruses are primarily taken up in host cells via clathrin-mediated endocytosis. In animal models, Virus-conjugated NIR QDs displayed extraordinary photoluminescence, superior stability, and tissue penetration in lung, allowing us to long-term monitor respiratory viral infection in a noninvasive manner. Importantly, the co-localization of viral hemagglutinin protein and QDs in infected lung further conformed the dynamic infection process of virus in vivo. Hence, this in situ QD-labeling strategy based on cell natural biosynthesis provides a brand-new and reliable tool for noninvasion visualizing viral infection in body in a real-time manner.

Indirect cytotoxicity evaluations of antibacterial raw silk fabric doped with calcium, copper and zinc on fibroblasts and osteoblasts

Antibacterial materials are widely used to prevent hospital-acquired infections. In our previous report, metal (calcium, copper or zinc)-doped raw silk fabrics were shown to possess strong antibacterial activities against Escherichia coli. However, antibacterial materials may occasionally be harmful to the human body; thus, in this study, we investigated the cytotoxicities of extracts from metal-doped raw silk fabrics with respect to fibroblasts and osteoblasts indirectly. Calcium-doped raw silk fabric demonstrated cytocompatibility with fibroblasts. Contrarily, copper- and zinc-doped raw silk fabrics remarkably decreased the cell densities of fibroblasts, indicating their cytotoxic effects. This observation could be attributed to the high concentrations of the released copper or zinc ions. However, calcium-, copper- and zinc-doped raw silk fabrics did not demonstrate any cytotoxic effects on osteoblasts because a high concentration of the serum alleviated the effects of these metal ions released from the fabrics. Thus, calcium-doped raw silk fabric is a promising antibacterial material that does not induce strong cytotoxicity. This study will facilitate the design of materials that are both antibacterial and safe.