Analysis and Test of a Proton Exchange Membrane Fuel Cell Oxidant System

2000 ◽  
Author(s):  
Arturo Vasquez ◽  
Donald E. Varanauski ◽  
Robert W. Clark
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Cell System ◽  
Proton Exchange ◽  
Published Data ◽  
Space Applications ◽  
Future Space ◽  
Water Separator ◽  
Component Models ◽  
Exchange Membrane

Abstract An effort is underway to develop a Proton Exchange Membrane (PEM) Fuel Cell system for future space applications. A breadboard system has been constructed and includes the following: reactant pressure regulators, ejector-based reactant pumps, a 4-kW fuel cell stack, and a passive, membrane-based oxygen / water separator. A computer model is being developed concurrently to analytically predict fluid flow in the oxidant reactant system. Preliminary data obtained from tests performed with the breadboard system, as well as other published data, has been used to validate the analytical component models. These components have been incorporated into an integrated oxidant fluid system model. Results obtained from both the performance tests and the analytical model are presented.

Design of a novel high-efficiency water separator for proton exchange membrane fuel cell system

2019 ◽  
Vol 44 (11) ◽  
pp. 5462-5469 ◽  
Author(s):  
Tiancai Ma ◽  
Yanbo Yang ◽  
Weikang Lin ◽  
Yuehua Yang ◽  
Wenya Jia ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
High Efficiency ◽  
Cell System ◽  
Proton Exchange ◽  
Fuel Cell System ◽  
Water Separator ◽  
Exchange Membrane

Thermodynamic, exergetic, and thermoeconomic analyses of a 1-kW proton exchange membrane fuel cell system fueled by natural gas

Energy ◽  
2020 ◽  
pp. 119362
Author(s):  
Seok-Ho Seo ◽  
Si-Doek Oh ◽  
Jinwon Park ◽  
Hwanyeong Oh ◽  
Yoon-Young Choi ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Proton Exchange Membrane ◽  
Cell System ◽  
Proton Exchange ◽  
Fuel Cell System ◽  
Exchange Membrane

Theoretical Analysis on the Autothermal Reforming Process of Ethanol as Fuel for a Proton Exchange Membrane Fuel Cell System

2006 ◽  
Vol 4 (4) ◽  
pp. 468-473 ◽  
Author(s):  
Alessandra Perna
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cell ◽  
Cell System ◽  
Autothermal Reforming ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Hydrogen Yield ◽  
Fuel Cell System ◽  
Exchange Membrane

The purpose of this work is to investigate, by a thermodynamic analysis, the effects of the process variables on the performance of an autothermal reforming (ATR)-based fuel processor, operating on ethanol as fuel, integrated into an overall proton exchange membrane (PEM) fuel cell system. This analysis has been carried out finding the better operating conditions to maximize hydrogen yield and to minimize CO carbon monoxide production. In order to evaluate the overall efficiency of the system, PEM fuel cell operations have been analyzed by an available parametric model.

Residential Experience with Proton Exchange Membrane Fuel Cell Systems for Combined Heat and Power

2005 ◽  
Vol 2 (4) ◽  
pp. 263-267 ◽  
Author(s):  
Darrell D. Massie ◽  
Daisie D. Boettner ◽  
Cheryl A. Massie
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Heat Recovery ◽  
Proton Exchange Membrane ◽  
Waste Heat ◽  
Cell System ◽  
Proton Exchange ◽  
Fuel Cell System ◽  
Cell Systems ◽  
Exchange Membrane

As part of a one-year Department of Defense demonstration project, proton exchange membrane fuel cell systems have been installed at three residences to provide electrical power and waste heat for domestic hot water and space heating. The 5kW capacity fuel cells operate on reformed natural gas. These systems operate at preset levels providing power to the residence and to the utility grid. During grid outages, the residential power source is disconnected from the grid and the fuel cell system operates in standby mode to provide power to critical loads in the residence. This paper describes lessons learned from installation and operation of these fuel cell systems in existing residences. Issues associated with installation of a fuel cell system for combined heat and power focus primarily on fuel cell siting, plumbing external to the fuel cell unit required to support heat recovery, and line connections between the fuel cell unit and the home interior for natural gas, water, electricity, and communications. Operational considerations of the fuel cell system are linked to heat recovery system design and conditions required for adequate flow of natural gas, air, water, and system communications. Based on actual experience with these systems in a residential setting, proper system design, component installation, and sustainment of required flows are essential for the fuel cell system to provide reliable power and waste heat.

Sign in / Sign up

Export Citation Format

Share Document