Estimation and Separation of Longitudinal Dynamic Stability Derivatives with Forced Oscillation Method Using Computational Fluid Dynamics

Aerospace ◽  
2021 ◽  
Vol 8 (11) ◽  
pp. 354
Author(s):  
Nadhie Juliawan ◽  
Hyoung-Seog Chung ◽  
Jae-Woo Lee ◽  
Sangho Kim

This paper focuses on estimating dynamic stability derivatives using a computational fluid dynamics (CFD)-based force oscillation method, and on separating the coupled dynamic derivatives terms obtained from the method. A transient RANS solver is used to calculate the time history of aerodynamic moments for a test model oscillating about the center of gravity, from which the coupled dynamic derivatives are estimated. The separation of the coupled derivatives term is carried out by simulating simple harmonic oscillation motions such as plunging motion and flapping motion which can isolate the pitching moment due to AOA rate (Cmα˙) and the pitching moment due to pitch rate (Cmq), respectively. The periodic motions are implemented using a CFD dynamic mesh technique with user-defined function (UDF). For the validation test, steady and unsteady simulations are performed on the Army-Navy Finner Missile model. The static aerodynamic moments and pressure distribution, as well as the coupled dynamic derivative results from the pitching oscillation mode, show good agreement with the previously published wind tunnel tests and CFD analysis data. In order to separate the coupled derivative terms, two additional harmonic oscillation modes of plunging and flapping motions are tested with the angle of attack variations from 0 to 85 degrees at a supersonic speed to provide real insight on the missile maneuverability. The cross-validation study between the three oscillation modes indicates the summation of the individual plunging and flapping results becoming nearly identical to the coupled derivative results from the pitching motion, which implies the entire set of coupled and separated dynamic derivative terms can be effectively estimated with only two out of three modes. The advantages and disadvantages of each method are discussed to determine the efficient approach of estimating the dynamic stability derivatives using the forced oscillation method.

Author(s):  
Kwangjin Yang ◽  
Hyoungseog Chung ◽  
Donghyun Cho ◽  
Eunhye An ◽  
Joonsoo Ko ◽  
...  

1964 ◽  
Vol 1 (5) ◽  
pp. 304-305 ◽  
Author(s):  
ROBERT A. KILGORE ◽  
BENJAMIN T. AVERETT

Author(s):  
David Fernandez ◽  
Jaime Moreu ◽  
Santiago de Guzman ◽  
Ronald W. Yeung ◽  
Manuel Moreu

This paper focuses on the applicability of different Computational Fluid Dynamics (CFD) software for the design of marine current turbines. As part of the conceptual design process, Seaplace has carried out a detailed numerical and experimental hydrodynamic program to optimize a new Tension-Tethered Turbine concept for harnessing energy from marine currents. Three different codes have been assessed, based on the demands from each phase: OpenProp, TurbProp, and ANSYS® CFX®. The paper provides an extensive summary of the main outcomes from the turbine optimization process to achieve highest efficiencies. A description of the tested geometries and the implementation of TurbProp to account for inline turbine solutions is included. Simulations for the test-model and prototype scales have been performed, with the pressure distributions, flow streamlines and power coefficients presented as primary results. The influence of simulation results on the final turbine configurations is discussed.


2002 ◽  
Author(s):  
N. Alemdaroglu ◽  
I. Iyigun ◽  
M. Altun ◽  
H. Uysal ◽  
F. Quagliotti ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document