ABSTRACTIn response to DNA damage, the ring-shaped 9-1-1 clamp is loaded onto 5’ recessed DNA to arrest the cell cycle and activate the DNA damage checkpoint. The 9-1-1 clamp is a heterotrimeric ring that is loaded in S. cerevisiae by Rad24-RFC, an alternative clamp loader in which Rad24 replaces the Rfc1 subunit in the RFC1-5 clamp loader of PCNA. Unlike RFC that loads the PCNA ring onto a 3’-ss/ds DNA junction, Rad24-RFC loads the 9-1-1 ring onto a 5’-ss/ds DNA junction, a consequence of DNA damage. The underlying 9-1-1 clamp loading mechanism has been a mystery. Here we report two 3.2-Å cryo-EM structures of Rad24-RFC bound to DNA and either a closed or 27 Å open 9-1-1 clamp. The structures reveal a completely unexpected mechanism by which a clamp can be loaded onto DNA. The Rad24 subunit specifically recognizes the 5’-DNA junction and holds ds DNA outside the clamp loader and above the plane of the 9-1-1 ring, rather than holding DNA inside and below the clamp as in RFC. The 3’ ssDNA overhang is required to obtain the structure, and thus confers a second DNA binding site. The bipartite DNA binding by Rad24-RFC suggests that ssDNA may be flipped into the open 9-1-1 ring, similar to ORC-Cdc6 that loads the Mcm2-7 ring on DNA. We propose that entry of ssDNA through the 9-1-1 ring triggers the ATP hydrolysis and release of the Rad24-RFC. The key DNA binding residues are conserved in higher eukaryotes, and thus the 9-1-1 clamp loading mechanism likely generalizes.
Crystal Structure of the Rad9-Rad1-Hus1 DNA Damage Checkpoint Complex—Implications for Clamp Loading and Regulation
