Moisture Diffusion in Carbon/Epoxy Composite and the Effect of Cyclic Hygrothermal Fluctuations: Characterization by Dynamic Mechanical Analysis (DMA) and Interlaminar Shear Strength (ILSS)

2008 ◽  
Vol 84 (7) ◽  
pp. 585-600 ◽  
Author(s):  
Sohaib Akbar ◽  
Tao Zhang
Keyword(s):  
Shear Strength ◽  
Dynamic Mechanical Analysis ◽  
Epoxy Composite ◽  
Moisture Diffusion ◽  
Mechanical Analysis ◽  
Interlaminar Shear Strength ◽  
Dynamic Mechanical ◽  
Interlaminar Shear

Experimental studies on interlaminar shear strength and dynamic mechanical analysis of luffa fiber epoxy composites with nano PbO addition

2021 ◽  
pp. 152808372110523
Author(s):  
Kumaresan Gladys Ashok ◽  
Kalaichelvan Kani
Keyword(s):  
Shear Strength ◽  
Dynamic Mechanical Analysis ◽  
Epoxy Matrix ◽  
Weight Percent ◽  
Mechanical Analysis ◽  
Interlaminar Shear Strength ◽  
Epoxy Composites ◽  
Dynamic Mechanical ◽  
Interlaminar Shear ◽  
Composite Samples

In the present study, the significance of nanofiller lead oxide (PbO) on the dynamic mechanical analysis (DMA) and interlaminar shear strength (ILSS) performance of luffa fiber–reinforced epoxy composites was investigated. The epoxy matrix was altered with nanofiller PbO of different weight percent through a mechanical stirring process. The PbO-added luffa fiber epoxy composites were made through hand layup preceded by the compression molding method. The prepared composite samples were investigated for ILSS and DMA. The test results lead to the inference that the 1.25 wt% PbO nanofiller–added composite samples attained 25%, 17%, and 55% of higher loss modulus, storage modulus, and ILSS, respectively, as compared with the other prepared samples. The morphological investigation was conducted on the fractured surface of the interlaminar tested samples. The micrographic images show the bonding nature of the luffa fiber with the epoxy matrix, fiber breakage, and fiber pullouts. The characterization studies such as FTIR, XRD, and EDX were conducted on the fabricated composite samples. The XRD studies show that the rise in weight percent of the nanofiller PbO enhances the crystallinity of the composite samples. Moreover, the composite sample prepared with 1.25 wt% nanofiller PbO can be used to prepare low-cost roofing materials for sustainable housing projects.

Electrical and dynamic mechanical analysis of sisal fibril reinforced epoxy composite

2018 ◽  
Vol 25 (5) ◽  
pp. 2020-2028 ◽  
Author(s):  
Subhash Nimanpure ◽  
S. A. R. Hashmi ◽  
Rajnish Kumar ◽  
Archana Nigrawal ◽  
Ajay Naik
Keyword(s):  
Dynamic Mechanical Analysis ◽  
Epoxy Composite ◽  
Mechanical Analysis ◽  
Dynamic Mechanical

scholarly journals Surface Modification of Carbon Fibers by Grafting PEEK-NH2 for Improving Interfacial Adhesion with Polyetheretherketone

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 778 ◽  
Author(s):  
Elwathig. Hassan ◽  
Tienah. Elagib ◽  
Hafeezullah Memon ◽  
Muhuo Yu ◽  
Shu Zhu
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Carbon Fibers ◽  
Interfacial Adhesion ◽  
Mechanical Analysis ◽  
Interlaminar Shear Strength ◽  
Thermoplastic Composites ◽  
Negative Effects ◽  
Covalent Bonds ◽  
Interlaminar Shear

Due to the non-polar nature and low wettability of carbon fibers (CFs), the interfacial adhesion between CFs and the polyetheretherketone (PEEK) matrix is poor, and this has negative effects on the mechanical properties of CF/PEEK composites. In this work, we established a modification method to improve the interface between CFs and PEEK based chemical grafting of aminated polyetheretherketone (PEEK-NH2) on CFs to create an interfacial layer which has competency with the PEEK matrix. The changed chemical composition, surface morphology, surface energy, and interlaminar shear strength were investigated. After grafting, the interlaminar shear strength (ILSS) was improved by 33.4% due to the covalent bonds in the interface region, as well as having good compatibility between the interface modifier and PEEK. Finally, Dynamic Mechanical Analysis (DMA) and Scanning Electron Microscopy (SEM) observation also confirmed that the properties of the modified CF/PEEK composites interface were enhanced. This work is, therefore, a beneficial approach towards enhancing the mechanical properties of thermoplastic composites by controlling the interface between CFs and the PEEK matrix.

Preparation and Characterization of Structural Damping Composites Toughened by Polyamide Nonwoven Fabrics

2016 ◽  
Vol 848 ◽  
pp. 189-195
Author(s):  
Nan Nan Ni ◽  
Yue Fang Wen ◽  
De Long He ◽  
Miao Cai Guo ◽  
Xiao Su Yi
Keyword(s):  
Shear Strength ◽  
Composite Laminates ◽  
Impact Resistance ◽  
Nonwoven Fabric ◽  
Mechanical Analysis ◽  
Interlaminar Shear Strength ◽  
Structural Damping ◽  
Nonwoven Fabrics ◽  
Compression After Impact ◽  
Interlaminar Shear

A new kind of structural damping composites was prepared by interleaving polyamide nonwoven fabrics (PNF) between the carbon fiber reinforced epoxy composite laminates. The damping behaviors of the composites made were experimentally investigated using cantilever beam test and dynamic mechanical analysis. The damping ratios of the nonwoven fabrics interleaved composites were compared with the ones of non-interleaved composites. In addition, the interlaminar shear strength and flexible modulus of the composites were also investigated, as well as the composite compression after impact (CAI), Mode I and Mode II interlaminar fracture toughness (GIC and GIIC), in order to evaluate the influence of the polyamide nonwoven fabric layers on the composite mechanical properties. It has been observed that the interleaved polyamide nonwoven fabric layers greatly improved the composite damping loss factors, and the composites containing 7 layers of PNF showed the best damping behavior. Meanwhile, the addition of PNF showed a negligible influence on the composite flexible strength and modulus and interlaminar shear strength. Most importantly, the CAI, GIC and GIIC tests indicated that the composite interlaminar toughness and impact resistance were significantly improved by the interleaved PNF. Finally, the reinforcing mechanism of this kind of composites is discussed.

DEGRADATION OF CARBON FIBER/EPOXY COMPOSITES BY XE LAMP AND HUMIDITY

2006 ◽  
Vol 20 (25n27) ◽  
pp. 3686-3691 ◽  
Author(s):  
XIAOJUN LV ◽  
QI ZHANG ◽  
GUOJUN XIE ◽  
GUANJIE LIU
Keyword(s):  
Shear Strength ◽  
Carbon Fiber ◽  
Epoxy Composite ◽  
Interlaminar Shear Strength ◽  
Epoxy Composites ◽  
Radiation Temperature ◽  
Transverse Tensile ◽  
Interlaminar Shear ◽  
Transverse Tensile Strength ◽  
Carbon Fiber Epoxy

In order to understand the effect of natural environmental factors on the carbon fiber/epoxy composites, the degradation of carbon fiber/epoxy composite was studied. The specimens were exposed in a Xe lamp chamber and suffered to ultraviolet light radiation, temperature and/or humidity conditions. The results show that the radiation, temperature and/or humidity could cause extensive corrosion to the surface and interior of the carbon/epoxy composite and attack the interface between matrix and carbon fiber, resulting in an obvious reduction of the transverse tensile strength and interlaminar shear strength. On the contrary, the longitudinal transverse shear strength was not affected much by the radiation, temperature and/or humidity. The results indicate that the radiation, temperature and/or humidity can result in the corrosion of the carbon/epoxy composite and consequently affect the mechanical properties of the carbon/epoxy composite partially.

Sign in / Sign up

Export Citation Format

Share Document