Proximate composition, pasting and functional properties of composite flour blends from cassava and chia seeds flour

2021 ◽  
pp. 108201322110694
Author(s):  
Ashura Katunzi-Kilewela ◽  
Leonard MP Rweyemamu ◽  
Lilian D Kaale ◽  
Oscar Kibazohi ◽  
Roman M Fortunatus
Keyword(s):  
Functional Properties ◽  
Proximate Composition ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Swelling Capacity ◽  
Pasting Temperature ◽  
Gelation Concentration ◽  
Flour Blends

The study established the proximate composition, pasting, and functional properties of cassava flour (CF) blended with chia seeds flour (CSF). Composite flour was prepared by blending CF with CSF in the ratios of 95:05, 90:10, 85:15, 80:20, and 75:25 with CF and CSF used as controls, respectively. The effect of blending significantly (p < 0.05) increased protein, fat, fibre, and ash contents as CSF increased. On other hand, moisture and carbohydrate contents decreased significantly. Pasting properties of composite flour blends decreased significantly (p < 0.05) as the incorporation of CSF increased and a noticeable change was observed for composite flour (75:25) except for peak time and pasting temperature. Functional properties of water absorption capacity (WAC) of CSF were significantly different with CF and composite flour blends. Oil absorption capacity (OAC) of CF and CSF were significantly different, while the composite flour blends had varied OAC due to the inclusion of the different amounts of CSF. The swelling capacity (SC) of CF and CSF were not significantly different, but composite flour blends were significantly different from both CSF and CF. The least gelation concentration (LGC) and bulk density (BD) increased significantly as chia seeds increased. Increased concentration of chia CSF in the composite flour blends showed to alter the functional properties. This study recommends composite flour 75:25 for processing semiliquid products like porridge due to reduced pasting properties values that may be associated with increased energy density compared to CF.

scholarly journals Functional, Sensory and Cooking Qualities of Acha-Tigernut Noodles

2020 ◽  
pp. 40-48
Author(s):  
J. A. Ayo ◽  
D. M. Atondo
Keyword(s):  
Functional Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Swelling Capacity ◽  
Pasting Temperature ◽  
Flour Blends ◽  
General Acceptability

The functional, sensory and cooking characteristics of noodles from blends of Acha-tigernut composite flour were investigated. The flour blends and noodles produced were analyzed for functional properties and cooking characteristics. The tiger nut flour was substituted into acha flour at 5, 10, 15 and 20% to produce Acha-tigernut composite flour which was used with other ingredients (salt and powdered ginger) to produce acha-tigernut based noodles. The functional properties of the flour, sensory and cooking characteristics of the noodles produced were determined. The water absorption capacity and swelling capacity increased from 210.59 to 215.53 (g/g) and 524.43 to 586.57, respectively with increase in tigernut flour. While oil absorption, solubility and bulk density decreases from 209.80 to 192.72 (g/g), 10.17 to 5.19 and 0.79 to 0.61 (g/ml) respectively. The swelling capacity ranged from 524.43 to 586.57 (%) with an increase in tigernut flour. The final viscosity of the samples was found to range from 2833.00to 2201.00 (m2/s). The peak properties decreased from 2680.67 to 1580.33 (RVU). The pasting temperature increases from 82.47to 87.57°C. The addition of tigernut decreased the trough, breakdown and peak time from 1730.67 to 1205.67, 985.67 to 434.67, and 5.84 to 5.71 RVU, respectively. The average mean scores for colour decreased from 6.95 to -6.30(%) While that of taste, flavor, texture and general acceptability increased from 5.55 to 6.60, 5.95 to 6.85 (%), 5.95 to 6.44 (%) and 6.70 to 6.83 (%), respectively, as the percentage of tigernut increased.

scholarly journals Effects of Fermented Maize Residue Addition on the Physico-chemical and Sensory Properties of Chin-Chin

2021 ◽  
pp. 65-73
Author(s):  
Owuno Friday ◽  
Achinewu Simeon Chituru
Keyword(s):  
Proximate Composition ◽  
Protein Digestibility ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Crude Fibre ◽  
Overall Acceptability ◽  
Physico Chemical ◽  
Significant Difference ◽  
Pasting Temperature

Chin-Chin, a traditional Nigerian snack was prepared utilizing wheat-fermented maize residue composite flour at 0 – 30% replacement levels. Effects of this addition on the functional and pasting properties of the flour composite was evaluated. The snack produced was also evaluated for its sensory attributes, proximate composition and invitro-protein digestibility (IVPD). Functional properties results showed an increase in water absorption capacity (WAC), a decrease in oil absorption capacity (OAC), decrease in Bulk Density (BD), swelling power and solubility index with residue addition. Pasting property results showed a drop in the value of peak, trough, breakdown and final viscosity with substitution while set back viscosity increased.Peak temperature decreased, but values for pasting temperature showed no significant difference between the control and the blends. Results for sensory evaluation showed equal preference for overall acceptability. Proximate composition results showed residue addition led to an increase in crude fibre and protein content with a drop in the carbohydrate value. Residue addition did not increase protein digestibility. Addition of fermented maize residue in chin-chin production can be another way of utilizing the fibre rich by-product of the production of fermented maize starch.

scholarly journals Chemical, Pasting and Sensory Characteristics of Ukpo oka - A Steamed Maize Pudding Formulated From Maize and African Yam Bean Flour

2020 ◽  
Vol 39 (01) ◽  
Author(s):  
Anosike Francis Chidi ◽  
Nwagu Kingsley Ekene ◽  
Ekwu Francis ◽  
Nweke Friday Nwalo ◽  
Nwoba Sunday Theophilus ◽  
...  
Keyword(s):  
Functional Properties ◽  
Pasting Properties ◽  
Sensory Attributes ◽  
Absorption Capacity ◽  
Peak Time ◽  
African Yam Bean ◽  
Bean Flour ◽  
Emulsion Capacity ◽  
Yam Flour ◽  
Flour Blends

Studies were conducted on the chemical, functional, pasting properties of the flour blends and sensory properties of ukpo oka formulated from of maize- African yam bean flour (AYBF) in order to improve the nutritional content of maize and encourage a wider utilization of the legume AYB. Supplementation of maize and African yam flour was done at 100:0, 50:50, 80:20, 60:40 and 20:80 maize: African yam bean flour, respectively. Proximate composition, functional properties, pasting properties of the flour blends was determined and sensory attributes of the products were also evaluated. The result showed that supplementation of maize with African yam bean flour significantly increased the protein, ash and fiber content of the flour blends with values ranging from 3.91 - 11.08%, 2.90 - 6.60%, 0.67 - 1.82% for protein, ash and fiber contents respectively. The protein, ash and fiber contents increased with addition of African yam bean flour while carbohydrate content of maize- African yam bean blends decreased with increase in the level of African yam bean. The values for functional properties ranged from 0.72 – 0.82g/ml, 99.33 – 323.33%, 9.01 – 19.65%, 690.00 - 978.33%, 0.67 – 1.13%, 0.484 – 1.038% for bulk density, foaming capacity, emulsion capacity, swelling capacity, water absorption capacity and oil absorption capacity respectively. Values for pasting properties of the flour blends expressed in rapid visco unit (RVU) ranges from 129.25 – 209.40, 22.55 – 67.93, 60.21 – 124.62 , 145.25 – 247.67 , 83.37 – 84.56 , 5.47 – 5.97 and 87.19 – 141.35 for peak viscosity, break down viscosity, set back viscosity, final viscosity, pasting temperature, peak time and trough respectively. Set back viscosity and final viscosity increased with increase in the levels of African yam bean while break down viscosity decrease with the increase in the levels of African yam bean. The products were highly rated in all sensory attributes evaluated however aroma decreases with increase in the levels of AYBF. Product made from flour blend 50:50 was the most preferred in terms of general acceptability.

scholarly journals QUALITY ATTRIBUTES OF PANCAKES FROM PEELED AND UNPEELED SWEETPOTATO FLOURS WITH CASSAVA STARCH

2020 ◽  
Vol 18 (1) ◽  
pp. 88-102
Author(s):  
A. T. OMIDIRAN ◽  
O. A. ADERIBIGBE ◽  
O. P. SOBUKOLA ◽  
O. O. AKINBULE
Keyword(s):  
Functional Properties ◽  
Proximate Composition ◽  
Control Sample ◽  
Quality Attributes ◽  
Cassava Starch ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Crude Fibre ◽  
Overall Acceptability ◽  
Flour Blends

This study evaluated some quality attributes of pancakes from peeled and unpeeled sweetpotato flours and cassava starch. Cassava starch was substituted up to 30% of the total composite flour. The proximate composition, colour, carotenoid and functional properties of the different flour blends were determined. The flour blends were processed into pancakes and the proximate composition and sensory acceptability of the pancakes were determined. Data obtained were subjected to analysis of variance. The result showed that they were significant differences (p<0.05) in the functional properties of the flour blends. Bulk density, Water absorption capacity, Oil absorption capacity, swelling capacity ranged from 0.70 to 0.78 g/ml, 1.87 to 2.30 g/ml, 1.02 to 1.40 g/ml and 5.18% to 6.66%  respectively. There were significant differences (p<0.05) in the proximate composition of the pancake samples. The values ranged from 42.76 to 45.53%, 2.13 to 3.98%, 9.06 to 10.34%, 5.01 to 7.18%, 3.75 to 6.01% and 29.19 to 35.33% for moisture, ash, fat, protein, crude fibre and carbohydrate contents, respectively. Pancake produced from 100:0 peeled and unpeeled sweetpotato flour had the highest score for overall acceptability which can compare favorably, with pancakes from wheat flour which is the control sample. In conclusion, sweetpotato flour blended with cassava starch at different ratio gave good proximate and functional properties which resulted in pancakes of good quality attributes.    

scholarly journals Effect of Processing Methods on the Physicochemical, Antinutrient and Pasting Properties of Three Commonly Consumed Soup Thickeners in Nigeria

2019 ◽  
pp. 1-16
Author(s):  
J. Eke-Ejiofor ◽  
C. U. Awajiogak
Keyword(s):  
Treatment Time ◽  
Amylose Content ◽  
Pasting Properties ◽  
Antinutritional Factors ◽  
Absorption Capacity ◽  
Peak Time ◽  
Processing Methods ◽  
Appropriate Treatment ◽  
Pasting Temperature ◽  
Gelation Concentration

The effect of processing methods on the physicochemical, functional, anti-nutrient factors and pasting properties of Mucuna sloanei (ukpo), Brachystegia eurycoma (achi) and Daterium microcarpum (ofor) were assessed using standard methods. Flour from these seeds were produced after boiling and soaking at different time intervals.  The moisture and ash contents of the three soup thickeners ranged between 5.58- 8.92% and 1.14-5.59% with sample B1 (achi boiled for 15 min) and C4 (ofor soaked for 48 h) having the lowest while sample B2 (achi boiled for 30 min) and C1 (ofor boiled for 15 min) having the highest. Crude Fat and fibre contents ranged from 2.90-10.95% and 1.30-14.39% with samples C1 and A1 (ukpo boiled for 15 min) as the highest respectively. Crude protein and carbohydrate contents of soup thickeners ranged between 9.19 -21.31% and 45.01-71.38% with samples A3 (ukpo soaked for 24 h) and B4 (achi soaked for 48 h) as the highest. Sugar and starch contents ranged from 2.61-5.04% and from 69.00-74.27% respectively with sample C4 and A4 (ukpo soaked for 48 h) as the lowest and sample A3 and B3 (Achi soaked for 24 h) as the highest. Amylose content increased with boiling and decreased with soaking which was the reverse amylopectin. Functional properties showed bulk density and dispersibility to range between 0.56-0.76 g/ml and 32.50-48-00% with sample B3 (achi soaked for 24 h) as highest in both cases. Solubility and swelling power ranged from 32.56-107.51% and from 4.61-8.72 g/g with sample A2 (ukpo boiled for 30 min) and A1 having the highest respectively. Foam capacity ranged from 2.50-29.50% with sample C2 (ofor soaked for 48 h) having the lowest and sample A1 having the highest, while the least gelation concentration of the three soup thickeners recorded 2.00% for all the treatments. Water absorption capacity ranged between 0.67-10.46 ml/g with B1 having the lowest and sample C2 having the highest. Antinutritional factors showed that phytate recorded 0.01 g/kg for all the treatments, tannin ranged from 2.22-40.71 mg/kg, oxalate between 3.40-7.90mg/100g and saponin between 2.60-9.18% with different treatments affecting the antinutrients. Free fatty acid, peroxide value, saponification and acid values increased with an increase in treatment time while iodine value decreased as processing time increased. Pasting result showed that treatment and time affected pasting properties with the highest values as peak viscosity 16429RVU, trough viscosity 9231RVU, breakdown 7858RVU, final viscosity 19977RVU and set back viscosity 13004RVU respectively. Peak time and pasting temperature ranged between 1.60-6.10 min and between 50.25-76.18°C for the different treatments. This study shows the need for appropriate treatment and time combination for better nutrient availability and detoxification of these seeds as soup thickeners.

scholarly journals Pasting Properties of Composite Flour Made from Sorghum, Millet and African Yam Bean

2021 ◽  
pp. 23-35
Author(s):  
J. N. Okafor ◽  
J. N. Ishiwu ◽  
J. E. Obiegbuna
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Water Absorption Capacity ◽  
African Yam Bean ◽  
Composite Flours ◽  
Gelation Concentration ◽  
Flour Blends

The aim of this research was to produce acceptable ‘fufu’ from a mixture of sorghum, millet, and African yam bean flours that will have a moderate carbohydrate and protein content with most optimized texture. The functional and sensory properties of flour blends produced from Sorghum, Millet and African yam bean was studied. Sorghum, Millet and African yam bean were processed into flour and mixed at different ratios to obtain composite flours. The flour formulations obtained were analyzed for water absorption capacity, bulk density, least gelation concentration , and viscosity .The  water absorption capacity ranged from 1.00 to 3.00,  the bulk density ranged from 0.56 to 0.82;the least gelation concentration ranged from 5.77 to 6.87,while the viscosity ranged from 0.956 to 9.30.Also proximate composition of the individual flours before formulation  was analyzed, it ranged from 6.13 to 8.46 moisture, 2.00 to 4.67 ash, 0.17 to 8.00 fiber,5.47 to 8.61 fat, 7.57 to 21.84 protein, 58.34 to 69.27 carbohydrate.The sensory values ranged from 5.60 to 6.45 for taste; 4.25 to 6.85  for colour; 5.15 to 6.80 for texture; 3.85 to 5.70 for aroma; 5.45 to 6.45 acceptability. Sample 10 (with the ratio of 40:70:20) had the highest rating for general acceptability. It was observed that sample 1(with the ratio of 60:50:60) had the lowest rating in taste and aroma. The mixture components that could produce optimum texture was determined through optimization plot. This work has demonstrated that acceptable ‘fufu’ with moderate protein and carbohydrate could be successfully produced using composite flours of sorghum, millet and African yam bean.

scholarly journals Evaluation of Various Properties of Amaranthus (Genus Amaranthus L.) Based Composite Flour Blends for Preparation of Gluten-Free Biscuits

2021 ◽  
Vol 13 (1) ◽  
pp. 57-68
Author(s):  
Muluken K. Kassa ◽  
Shimelis A. Emire
Keyword(s):  
Proximate Composition ◽  
Free Food ◽  
Quality Attributes ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Gluten Free ◽  
Mineral Concentration ◽  
Composite Flours ◽  
Flour Blends

This research was conducted to investigate the pasting, rheological and functional properties, and gluten-free biscuit making potential of a composite flour prepared from grains of amaranthus, sorghum and finger millet. The formulation for the composite flour was obtained from D-optimal mixture design ratio using Design-Expert. The rheological and pasting properties of the composite flours were determined, while the proximate composition, physical dimensions, mineral concentration and sensory quality attributes of the biscuits were assessed. The results showed that there were significant (p&lt;0.05) differences in the pasting profile of the control and amaranthus based composites flour except for pasting temperature. Water absorption capacity and water soliblity index increased as the blending ratio of amaranthus flour increased, while oil absorption capacity decreased. The proximate composition evaluation 13.75, 2.04, 1.77 and 31.75% were found to be the highest values of the biscuit samples in terms of protein, crude fiber, ash and crude fat, respectively. Mineral analaysis was carried out and there was a significant (p&lt;0.05) difference in Fe, Ca, Zn and P content among the biscuit samples made from the composite flour blends. Similarly, the sensory evaluation indicated that there was a significant (p&lt;0.05) differences in apperance, colour, texture, flavour and overall acceptability among the composite biscuit samples. However, the difference was insignificant (p&lt;0.05) in crispiness of biscuit samples. In a nut shell this research revealed that a nutritionally dense gluten-free biscuits can be formulated without affecting the quality attributes of the biscuit. Thus, the composite flours can be used for the preparation of gluten free food products in africa, where the crops have not been effectively utilized in food processing industries.

scholarly journals Functional and pasting properties of wheat/tigernut pomace flour blends and sensory attributes of wheat/tigernut pomace flour meat pie

2019 ◽  
Vol 11 (1) ◽  
pp. 30-36
Author(s):  
Idowu Michael Ayodele ◽  
Adeola Abiodun Aderpju ◽  
Oke Emmanuel Kehinde ◽  
Amusa Ayodeji Joseph ◽  
Omoniyi Saheed Adewale
Keyword(s):  
Wheat Flour ◽  
Control Sample ◽  
Pasting Properties ◽  
Sensory Attributes ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Overall Acceptability ◽  
Significant Difference ◽  
Flour Blends

This study investigated the functional and pasting properties of wheat and tigernut pomace flour blends, as well as the sensory attributes of the meat pie obtained from the composite flour. Tigernut pomace flour was substituted for wheat flour in the amount of 2 –10%. Unsubstituted wheat flour served as the control. The composite blends were analysed for functional and pasting properties. The sensory attributes of the meat pie obtained from the composite flour were also determined. Bulk density, water absorption capacity, swelling power, and the solubility index of the blends ranged from 0.70 -0.75 g/mL, 0.62 -0.96%, 4.06 -4.47 g/g, and 2.45 -13.7% respectively. Peak, trough, breakdown, final, and setback viscosities, peak time, and pasting temperature ranged from 113.6 -135.9 RVU, 76.7 -90.2 RVU, 36.0 -45.8 RVU, 170 -183.7 RVU, 91.0 -93.6 RVU, 5.07 -6.03 min, and 88.4 -90.0 RVU respectively. In terms of appearance, the meat pie samples prepared from tigernut-substituted flour blends did not show significant difference (p &lt; 0.05) from the control sample. The control sample had the highest overall acceptability, although samples from the composite blends were also found to be acceptable. Hence, tigernut pomace flour could be substituted for wheat at the amount of 10% to produce an acceptable meat pie.

scholarly journals Effects of the Inclusion of Andrographis paniculata Leaf on the Functional Properties and Pasting Characteristics of Wheat-pearl Millet-Based Flour Blends

2020 ◽  
pp. 41-57
Author(s):  
David T. Ishola ◽  
Mathew K. Bolade
Keyword(s):  
Pearl Millet ◽  
Functional Properties ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Pasting Characteristics ◽  
Swelling Capacity ◽  
Foaming Capacity ◽  
Flour Blends

This study evaluated flour blends from Wheat, Pearl millet and Andrographis paniculata leaf for functional properties and pasting characteristics profiling. The functional properties such as solubility, gelling capacity, water absorption capacity (WAC), Oil absorption capacity (OAC), Bulk density, foaming capacity and stability and swelling capacity and the pasting characteristics were studied. The inclusion of A. paniculata leaf flour in the blends revealed a significant general increase in water absorption capacity, oil absorption capacity, swelling capacity, and bulk density. However, a general decrease in the foaming capacity, solubility, and least gelation was observed as the inclusion of A. paniculata leaf flour increased. The pasting properties of WPMF (flour blend without the inclusion of A. paniculata leaf flour) exhibited the following values: peak viscosity (658 RVU), breakdown (372 RVU), final viscosity (923 RVU), setback (637 RVU), peak time (5.07 min), and pasting temperature (84.8oC). The inclusion of A. paniculata leaf flour in the blends led to a significant general decrease in all the pasting factors. The inclusion of A. paniculata had a significant effect on the functional and pasting properties of wheat-pearl millet based flour.

scholarly journals Functional and pasting characteristics of pupuru and pupuru analogues from cassava (Manihot esculenta) and breadfruit (Artocarpus altilis) blends

2020 ◽  
Vol 13 (1) ◽  
pp. 51-68
Author(s):  
O. F. Akinyele ◽  
A. V. Ikujenlola ◽  
T. O. Omobuwajo
Keyword(s):  
Water Absorption ◽  
Manihot Esculenta ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Peak Time ◽  
Standard Methods ◽  
Artocarpus Altilis ◽  
Swelling Power ◽  
Pasting Characteristics ◽  
Pasting Temperature

Abstract Pupuru and pupuru analogues are fermented, smoked food products usually produced from cassava or cassava substituted with a varying ratio of breadfruit. This study aims at determining and comparing the functional and pasting characteristics of pupuru and pupuru analogues with a view to expanding the utilization of breadfruit as pupuru analogue. The functional properties (water absorption capacity (%), swelling power (g/g), solubility (%)) and pasting characteristics were determined using standard methods. The results showed that the yield of the products ranged between 24.66 and 29.65%, and it was not affected by the amount of breadfruit substituted. The water absorption capacities of the pupuru and pupuru analogues ranged between 216.0 and 449.0%; this parameter increased with temperature increase. Both swelling power and solubility had a rapid increase from 80 °C to 90 °C. Pasting temperature ranged between 73.15 and 83.66 °C, with peak time between 4.58 and 5.33 min. The final viscosity ranged between 94.08 and 391.83 RVU, and it decreased with increase in breadfruit substitution. The study concluded that adding breadfruit to cassava in pupuru analogue production improved some of the functional and pasting properties of the product.

Sign in / Sign up

Export Citation Format

Share Document