Different failure mode of gravel and soft clay slopes

2008 ◽  
pp. 511-516
Keyword(s):  
2022 ◽  
Vol 119 ◽  
pp. 103032
Author(s):  
Lei Song ◽  
Hongfen Zhao ◽  
Jinhui Li ◽  
Qingjie Yang

Author(s):  
Qilin Yin ◽  
Jinjin Zhai ◽  
Sheng Dong

The overall bearing capacity of a jack-up rig under horizontal load is conducted using finite element models that consider the deck–foundation–soil interaction. In these models, the simplified horizontal load acts on the deck and increases until the platform loses its stability. The effects of the self-weight of the platform W and load direction α on the ultimate horizontal bearing capacity Hult are investigated, and W- Hult failure envelopes under different α conditions are obtained. Two typical seabed types, including the double-layer seabed of sand overlying soft clay and the single-layer seabed of sand, are considered. The results show that a critical self-weight Wcritical exists in the double-layer seabed. Based on Wcritical, the failure of the platform presents two different modes. When W <  Wcritical, the windward leg is pulled up, and Hult increases with the increase in W. When W >  Wcritical, the failure mode is the leeward leg or legs puncturing the bearing sand layer, and Hult decreases with the increase in W. In the single-layer seabed, the failure mode is the windward leg being pulled up, and Hult increases with the increase in W throughout the whole range. The W- Hult envelopes in these two types of seabeds are basically the same when W <  Wcritical.


Author(s):  
Song Dai ◽  
Bo Han ◽  
Guoxiang Huang ◽  
Xiaoqiang Gu ◽  
Liu Jian ◽  
...  

1982 ◽  
Vol 108 (11) ◽  
pp. 1475-1493
Author(s):  
Yoshiharu Moriwaki ◽  
Izzat M. Idriss ◽  
Earl H. Doyle
Keyword(s):  

2013 ◽  
Vol 347-350 ◽  
pp. 1203-1206
Author(s):  
Jia Jia Zheng ◽  
Li Jian Wu ◽  
Run Hua Guo

In order to provide a theoretical basis for the use of lacustrine soft clay hard shell layer, the first thing to do is understanding its bearing capacity characteristics. Based on the project of Nan-Mao section in Hunan provincial highway S204, combining with bearing capacity test, the bearing capacity characteristics and failure mode of hard shell foundation was comprehensively analyzed. From the field bearing capacity test, it is found that the PS curve of hard shell layer has obvious changes from elastic to plastic, while the PS curve of soft soil layer under hard shell layer just has elastoplastic stage from the beginning, and the failure mode of foundation mainly are punching failure and general shear failure. So for the quality control of lacustrine hard shell soft foundation mainly includes two aspects: the deformation and overall stability.


Sign in / Sign up

Export Citation Format

Share Document