Investigation on the performance decay of proton exchange membrane basing on sulfonated heterocyclic poly(aryl ether ketone)s in Fenton’s reagent

2021 ◽  
Author(s):  
Qian Liu ◽  
Shouhai Zhang ◽  
Zhaoqi Wang ◽  
Jianhua Han ◽  
Ce Song ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Proton Exchange Membranes ◽  
Proton Conduction ◽  
Proton Exchange ◽  
Aryl Ether ◽  
Potential Applications ◽  
Aryl Ether Ketone ◽  
Ether Ketone ◽  
Exchange Membrane

Sulfonated N-heterocyclic poly(aryl ether)s proton exchange membranes have potential applications in the fuel-cell field for their favorable proton conduction capacity and stability. This paper investigates the changes in mass and...

scholarly journals Sulfonated Poly(aryl ether ketone)s Containing the Hexafluoroisopropylidene Diphenyl Moiety Prepared by Direct Copolymerization, as Proton Exchange Membranes for Fuel Cell Application†

2004 ◽  
Vol 37 (21) ◽  
pp. 7960-7967 ◽  
Author(s):  
Peixiang Xing ◽  
Gilles P. Robertson ◽  
Michael D. Guiver ◽  
Serguei D. Mikhailenko ◽  
Serge Kaliaguine
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membranes ◽  
Proton Exchange ◽  
Aryl Ether ◽  
Fuel Cell Application ◽  
Aryl Ether Ketone ◽  
Ether Ketone ◽  
Sulfonated Poly

scholarly journals Synthesis and characterization of poly(aryl ether ketone) copolymers containing (hexafluoroisopropylidene)-diphenol moiety as proton exchange membrane materials

Polymer ◽  
2005 ◽  
Vol 46 (10) ◽  
pp. 3257-3263 ◽  
Author(s):  
Peixiang Xing ◽  
Gilles P. Robertson ◽  
Michael D. Guiver ◽  
Serguei D. Mikhailenko ◽  
Serge Kaliaguine
Keyword(s):  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Synthesis And Characterization ◽  
Aryl Ether ◽  
Membrane Materials ◽  
Aryl Ether Ketone ◽  
Ether Ketone ◽  
Exchange Membrane

scholarly journals 3D Network Structural Poly (Aryl Ether Ketone)-Polybenzimidazole Polymer for High-Temperature Proton Exchange Membrane Fuel Cells

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Junqiao Jiang ◽  
Erli Qu ◽  
Min Xiao ◽  
Dongmei Han ◽  
Shuanjin Wang ◽  
...  
Keyword(s):  
Fuel Cells ◽  
High Temperature ◽  
Phosphoric Acid ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Aryl Ether ◽  
3D Network ◽  
Aryl Ether Ketone ◽  
Ether Ketone ◽  
Exchange Membrane

Poor mechanical property is a critical problem for phosphoric acid-doped high-temperature proton exchange membranes (HT-PEMs). In order to address this concern, in this work, a 3D network structural poly (aryl ether ketone)-polybenzimidazole (PAEK-cr-PBI) polymer electrolyte membrane was successfully synthesized through crosslinking reaction between poly (aryl ether ketone) with the pendant carboxyl group (PAEK-COOH) and amino-terminated polybenzimidazole (PBI-4NH2). PAEK-COOH with a poly (aryl ether ketone) backbone endows superior thermal, mechanical, and chemical stability, while PBI-4NH2 serves as both a proton conductor and a crosslinker with basic imidazole groups to absorb phosphoric acid. Moreover, the composite membrane of PAEK-cr-PBI blended with linear PBI (PAEK-cr-PBI@PBI) was also prepared. Both membranes with a proper phosphoric acid (PA) uptake exhibit an excellent proton conductivity of around 50 mS cm-1 at 170°C, which is comparable to that of the well-documented PA-doped PBI membrane. Furthermore, the PA-doped PAEK-cr-PBI membrane shows superior mechanical properties of 17 MPa compared with common PA-doped PBI. Based upon these encouraging results, the as-synthesized PAEK-cr-PBI gives a highly practical promise for its application in high-temperature proton exchange membrane fuel cells (HT-PEMFCs).

scholarly journals Use of Lignosulfonate from Pulping Industrial Waste as a Potential Material for Proton Exchange Membrane in Fuel Cell

2021 ◽  
Author(s):  
Hunan Liang ◽  
Guodong Zhu ◽  
Yan Li ◽  
Dayu Yu ◽  
Wei Shang
Keyword(s):  
Fuel Cell ◽  
Proton Conductivity ◽  
Industrial Waste ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Potential Candidate ◽  
Aryl Ether ◽  
Physical Strength ◽  
Ether Ketone ◽  
Exchange Membrane

Abstract A polymer membrane as a proton exchange membrane (PEM) used in fuel cell is prepared by blending lignosulfonate (LS) from sulfite pulp industrial waste with sulphonated poly (ether ether ketone) (SPEEK). Different contents of LS ranging from 0 to 20% (w/w) were blended with SPEEK to measure the influence of LS content on performance of membrane. The results indicated that the proton conductivity of the prepared membrane was increased with the content of LS in membrane. For as-prepared membrane containing 15% LS, the proton conductivity is remarkably higher than that of membrane fabricated by sulfonated poly (aryl ether ketone) at the same test conditions. Nevertheless, the physical strength decreased as the LS content increased. Comprehensively, the blending membrane containing 15% LS can satisfy the PEM application, which implyes LS as a potential candidate for PEM application in a low temperature range.

Sign in / Sign up

Export Citation Format

Share Document