Abstract
Current guidelines recommend the use of an intravenous fluid warmer to prevent perioperative hypothermia. Among the various methods of warming intravenous fluids, contact warmers are among the most effective and accurate, particularly in clinical conditions requiring rapid infusions of refrigerated blood or fluids. Contact warmers put the infusate in direct contact with a heating block. Some fluid warmers use heating blocks manufactured from aluminium. Several recent publications, however, have shown that uncoated aluminium blocks can leach potentially toxic amounts of aluminium into the body.
In this review we performed a systematic literature review on aluminium leaching with contact fluid warmers and describe what manufacturer and competent authorities did in the past years to ensure patient safety. The search resulted in five articles describing the aluminium leaching. Four different devices (Level 1 Fluid Warmer from Smiths Medical, ThermaCor from Smisson-Cartledge Biomedical, Recirculator 8.0 from Eight Medical International BV, enFlow from Vyaire) were shown to leach high levels of aluminium when heating certain intravenous fluids. One manufacturer (Vyaire) voluntarily removed their product from the market, while three manufacturers (Eight Medical International BV, Smisson-Cartledge Biomedical, and Smiths Medical) revised the instructions for use for the affected devices. The enFlow fluid warmer was subsequently redesigned with a parylene coating over the heating block. The scientific literature shows that by using a thin parylene layer on the heating block, the leaching of aluminium can be nearly eliminated without affecting the heating performance of the device.
Quantified aluminium levels released into blood and fluids using the Level 1 Fast Flow Fluid Warmer