scholarly journals Chemical analysis of some Pakistani Portland cement/clinker and their compliance with ASTM standards

2020 ◽  
Vol 11 (3) ◽  
pp. 194-197
Author(s):  
Sufian Rasheed ◽  
Niamat Ullah ◽  
Amir Ullah

This is a quality control study and analysis of Portland cement taken from four Pakistani cement plants (Deewan, Kohat, Lucky and Maple Leaf). These four samples were analysed and the determination of major oxides present was carried out. Loss on ignition and the percentage of insoluble residue was also determined. Our research shows percentage of major oxides present in these four samples i.e. calcium oxide, silicon dioxide, aluminium oxide, iron oxide, sulphur trioxide and magnesium oxide. According to the American Society for Testing and Materials Cement (ASTM C150), the percentage of these oxides, loss on ignition and insoluble residue of these four plants are within the specified quality control range. The present study compared the quality of different oxides at the Portland cement brands in Pakistan. The percentages of SiO2,SO3, CaO, Al2O3,MgO and Fe2O3 were calculated according to American Society for Testing and Materials (ASTM C150) uniform standards. The percentages of all of the brands were within the limits specified by the standard (ASTM C150).

2002 ◽  
Vol 17 (3) ◽  
pp. 178-185 ◽  
Author(s):  
Phe Man Suherman ◽  
Arie van Riessen ◽  
Brian O’Connor ◽  
Deyu Li ◽  
Dick Bolton ◽  
...  

The existence of glass or amorphous component in Portland cement clinker has been questioned for a long time. However, besides the crystalline phases, there are reports in the literature of noncrystalline material in cement clinker, which is considered to be the residue of the melt that has failed to crystallize. Absolute phase abundances were determined in this study by Rietveld refinements with laboratory X-ray data, using both internal and external phase composition standards. The results clearly demonstrate the existence of an amorphous component in Portland cement clinker. The presence of an amorphous component was also apparent from diffraction data for clinker from which the silicate phases had been chemically removed, using both laboratory X-ray and synchrotron radiation patterns.


2021 ◽  
Vol 5 (1) ◽  
pp. 75
Author(s):  
Georgios E. Christidis ◽  
Maria Dimitriadi ◽  
George Triantafyllou ◽  
Christos Tsoumeleas

Six ordinary Portland cement (OPC) clinkers and one white cement clinker were analyzed with the Rietveld method, using ZnO internal standard (IC), to determine the presence of amorphous matter (AM). All clinkers contain abundant AM and have lower silicate phase contents when compared with the same clinkers analyzed without IC, whereas the abundances of the aluminate and ferrate phases were not affected by AM. The white cement clinker had the highest AM content. Determination of AM is important for complete characterization of the OPC clinker and might contribute to a better understanding of the mechanical properties of the clinker.


2003 ◽  
Vol 23 (3) ◽  
pp. 281-285 ◽  
Author(s):  
P.G. Ract ◽  
D.C.R. Espinosa ◽  
J.A.S. Tenório

Sign in / Sign up

Export Citation Format

Share Document