Determination of Bentazepam by differential pulse polarography and adsorptive stripping voltammetry

1990 ◽  
Vol 336 (3) ◽  
pp. 222-225 ◽  
Author(s):  
Lucas Hernandez ◽  
Pedro Hernandez ◽  
Encarnacion Lorenzo ◽  
Claudio Gonzalez ◽  
Inmaculada Gonzalez
Keyword(s):  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Adsorptive Stripping Voltammetry ◽  
Differential Pulse Polarography ◽  
Pulse Polarography

Electroanalytical determination of diazinon: Direct current and differential pulse polarography and adsorptive stripping voltammetry

1990 ◽  
Vol 2 (7) ◽  
pp. 567-571 ◽  
Author(s):  
R. Carabias Martínez ◽  
F. Becerro Domínguez ◽  
J. Hernández Méndez ◽  
P. González Martín
Keyword(s):  
Direct Current ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Adsorptive Stripping Voltammetry ◽  
Differential Pulse Polarography ◽  
Pulse Polarography

Polarographic and Voltammetric Determination of Trace Amounts of 3-Nitrofluoranthene

2006 ◽  
Vol 71 (11-12) ◽  
pp. 1571-1587 ◽  
Author(s):  
Karel Čížek ◽  
Jiří Barek ◽  
Jiří Zima
Keyword(s):  
River Water ◽  
Solid Phase ◽  
Mercury Electrode ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Separation And Preconcentration

The polarographic behavior of 3-nitrofluoranthene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV), both at a hanging mercury drop electrode. Optimum conditions have been found for its determination by the given methods in the concentration ranges of 1 × 10-6-1 × 10-4 mol l-1 (DCTP), 1 × 10-7-1 × 10-4 mol l-1 (DPP), 1 × 10-8-1 × 10-6 mol l-1 (DPV) and 1 × 10-9-1 × 10-7 mol l-1 (AdSV), respectively. Practical applicability of these techniques was demonstrated on the determination of 3-nitrofluoranthene in drinking and river water after its preliminary separation and preconcentration using liquid-liquid and solid phase extraction with the limits of determination 4 × 10-10 mol l-1 (drinking water) and 2 × 10-9 mol l-1 (river water).

Determination of Copper, Nickel, and Chromium in Foods

1983 ◽  
Vol 66 (3) ◽  
pp. 620-624
Author(s):  
Walter Holak
Keyword(s):  
Anodic Stripping Voltammetry ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Atomic Absorption Spectrophotometry ◽  
Differential Pulse Polarography ◽  
National Bureau ◽  
Pulse Polarography ◽  
Digestion Technique ◽  
Determination Of Copper

Abstract A collaboratively studied method for Pb, Cd, As, Se, and Zn that uses a closed system digestion technique has now been extended to include 3 additional elements, Cu, Ni, and Cr. Cu is determined by either atomic absorption spectrophotometry or anodic stripping voltammetry, depending on the concentration. Ni and Cr are determined by differential pulse polarography. Analysis of National Bureau of Standards reference materials by this procedure gives values in close agreement with the accepted values. Recoveries from applesauce and chicken spiked at 0.6-4 μg/g are in the 92-101% range. The sensitivity of the multielement procedure is 0.34,0.14, and 0.24 μg/g for Cu, Ni, Cr, respectively, at the 90% confidence level.

Polarographic and Voltammetric Determination of 1-Nitropyrene

2000 ◽  
Vol 65 (12) ◽  
pp. 1888-1896 ◽  
Author(s):  
Jiří Barek ◽  
Jiří Zima ◽  
Josino C. Moreira ◽  
Alexandr Muck
Keyword(s):  
Mercury Electrode ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Optimum Conditions ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry ◽  
The Given

The polarographic behaviour of 1-nitropyrene was investigated by tast polarography, differential pulse polarography (both with a dropping mercury electrode), differential pulse voltammetry, and adsorptive stripping voltammetry (both with a hanging mercury drop electrode). Optimum conditions have been found for its determination by the given methods in the concentration ranges 2-100, 0.2-100, 0.1-10, and 0.001-0.01 μmol l-1, respectively.

Determination of Arsenic and Selenium in Foods By Electroanalytical Techniques

1976 ◽  
Vol 59 (3) ◽  
pp. 650-654 ◽  
Author(s):  
Walter Holak
Keyword(s):  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Magnesium Nitrate ◽  
Differential Pulse Polarography ◽  
Cathodic Stripping Voltammetry ◽  
Pulse Polarography ◽  
Trivalent State ◽  
Relative Standard ◽  
Cathodic Stripping

Abstract Arsenic and selenium are determined in foods by differential pulse polarography and cathodic stripping voltammetry. The sample is digested with nitric acid and magnesium nitrate and then dissolved in dilute hydrochloric acid. An aliquot is removed, the arsenic is chemically reduced to the trivalent state, and interferences are removed by ion exchange before polarography. Selenium is determined in a second aliquot by cathodic stripping voltammetry. Recoveries for both elements in several foods were from 90 to 110%. The relative standard deviations for arsenic at 5 ppm and selenium at 0.48 ppm were 5.8 and 7.3%, respectively.

Polarographic and Voltammetric Determination of Submicromolar Concentrations of Genotoxic 1,5-Dinitronaphthalene

2004 ◽  
Vol 69 (11) ◽  
pp. 2021-2035 ◽  
Author(s):  
Kumaran Shanmugam ◽  
Jiří Barek ◽  
Jiří Zima
Keyword(s):  
Differential Pulse Voltammetry ◽  
Mercury Electrode ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Differential Pulse Polarography ◽  
Hanging Mercury Drop Electrode ◽  
Pulse Polarography ◽  
Dropping Mercury Electrode ◽  
Pulse Voltammetry

Polarographic and voltammetric behavior of 1,5-dinitronaphthalene was investigated using tast polarography and differential pulse polarography at a classic dropping mercury electrode and differential pulse voltammetry and adsorptive stripping voltammetry at a hanging mercury drop electrode. Optimum conditions have been found for the determination of tested substance in the concentration range 2-10 μmol l-1 in tast polarography, 0.2-1 μmol l-1 in differential pulse polarography at a classic dropping mercury electrode or differential pulse voltammetry at a hanging mercury drop electrode, and 0.02-0.1 μmol l-1 using adsorptive stripping voltammetry. A possible mechanism of the electrochemical reduction of 1,5-dinitronaphthalene at mercury electrodes is discussed.

Sign in / Sign up

Export Citation Format

Share Document