Subsurface crack initiation in high-cycle fatigue of Ti6Al4V alloys at cryogenic temperaturesUmezawa, O., Nagai, K. and Ishikawa, K.Tetsu-to-Hagane (J. Iron Steel Inst. Jpn.) June 1990 76, (6), 924–931 (in Japanese)

1991 ◽  
Vol 13 (3) ◽  
pp. 281-281 ◽  
Keyword(s):  
Crack Initiation ◽  
Iron Steel Inst ◽  
High Cycle Fatigue ◽  
Cycle Fatigue ◽  
Subsurface Crack

High Cycle Fatigue Properties of Multi-Directionally Forged Commercial Purity Grade 2 Ti Plate

2018 ◽  
Vol 916 ◽  
pp. 166-169
Author(s):  
Ilhamdi ◽  
Toshifumi Kakiuchi ◽  
Hiromi Miura ◽  
Yoshihiko Uematsu
Keyword(s):  
Crack Initiation ◽  
High Cycle Fatigue ◽  
Pure Titanium ◽  
Fatigue Tests ◽  
Fatigue Properties ◽  
Commercially Pure Titanium ◽  
Cycle Fatigue ◽  
Subsurface Crack ◽  
Initiation Mechanism ◽  
Fish Eye

Tension-tension fatigue tests were conducted using ultrafine-grained commercially pure Titanium (Ti) plates fabricated by multi-directional forging (MDFing). The MDFed pure Ti plates with the thickness of 1 mm were developed aiming at dental implant application. The fatigue properties of MDFed pure Ti plates were superior to those of the conventional rolled pure Ti plates. The higher fatigue strengths in MDFed plates could be attributed to the much finer grains evolved by MDFing. Fatigue crack initiated from specimen surface, when number of cycles to failure was shorter than 106 cycles. In the high cycle fatigue (HCF) region, however, subsurface crack initiation with typical fish-eye feature was recognized in the MDFed pure Ti plate in spite of the thin thickness. Fractographic analyses revealed that no inclusion existed at the center of fish-eye. The subsurface crack initiation mechanism could be related to the inhomogeneity of microstructure with some coarse grains in the inner part of the plate.

Very High Cycle Fatigue Behavior and Thermographic Analysis of High Strength Steel

2010 ◽  
Vol 118-120 ◽  
pp. 948-951
Author(s):  
Chuang Shao ◽  
Claude Bathias ◽  
Danièle Wagner ◽  
Hua Tao
Keyword(s):  
Crack Initiation ◽  
High Strength Steel ◽  
High Cycle Fatigue ◽  
Fatigue Testing ◽  
Fatigue Behavior ◽  
High Strength ◽  
Cycle Fatigue ◽  
Subsurface Crack ◽  
Very High Cycle Fatigue ◽  
Very High

Very high cycle fatigue behavior of high strength steel, were investigated using ultrasonic fatigue testing equipment at 20 kHz up to 109cycles. S-N curves at room temperature with different stress ratio (R=0.01 and R=0.1) was determined. The experimental results show that fatigue strength decrease with increasing number of cycles between 105 and 109. SEM examination of fracture surface reveals that fatigue damage was governed by the formation of cracks, and subsurface crack initiation was in the very long life range. The results shown that the portions of life attributed to subsurface crack initiation between 107 and 109 cycles are 99%.

scholarly journals Subsurface Crack Initiation in High Cycle Fatigue at Cryogenic Temperatures.

1991 ◽  
Vol 26 (4) ◽  
pp. 263-271 ◽  
Author(s):  
Osamu UMEZAWA ◽  
Kotobu NAGAI ◽  
Tetsumi YURI ◽  
Toshio OGATA ◽  
Keisuke ISHIKAWA
Keyword(s):  
Crack Initiation ◽  
High Cycle Fatigue ◽  
Cryogenic Temperatures ◽  
Cycle Fatigue ◽  
Subsurface Crack
Sign in / Sign up

Export Citation Format

Share Document