Fracture risk assessment for the pressurized water reactor pressure vessel under pressurized thermal shock events

2016 ◽  
Vol 300 ◽  
pp. 412-421 ◽  
Author(s):  
Hsoung-Wei Chou ◽  
Chin-Cheng Huang
Keyword(s):  
Risk Assessment ◽  
Fracture Risk ◽  
Thermal Shock ◽  
Pressure Vessel ◽  
Fracture Risk Assessment ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

Structural Reliability Evaluation on the Pressurized Water Reactor Pressure Vessel Under Pressurized Thermal Shock Events

2014 ◽  
Author(s):  
Hsoung-Wei Chou ◽  
Chin-Cheng Huang
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Thermal Shock ◽  
Pressure Vessel ◽  
Nuclear Power ◽  
Reactor Pressure Vessel ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

The failure probability of the pressurized water reactor pressure vessel for a domestic nuclear power plant in Taiwan has been evaluated according to the technical basis of the USNRC’s new pressurized thermal shock (PTS) screening criteria. The ORNL’s FAVOR code and the PNNL’s flaw models are employed to perform the probabilistic fracture mechanics analysis based on the plant specific parameters of the domestic reactor pressure vessel. Meanwhile, the PTS thermal hydraulic and the probabilistic risk assessment data analyzed from a similar nuclear power plant in the United States for establishing the new PTS rule are applied as the loading condition. Besides, an RT-based regression formula derived by the USNRC is also utilized to verify the through-wall cracking frequencies. It is found that the through-wall cracking of the analyzed reactor pressure vessel only occurs during the PTS events resulted from the stuck-open primary safety relief valves that later reclose, but with only an insignificant failure risk. The results indicate that the Taiwan domestic PWR reactor pressure vessel has sufficient structural margin for the PTS attack until either the end-of-license or for the proposed extended operation.

Dosimetry Assessments for the Reactor Pressure Vessel and Core Barrel in UK Pressurized Water Reactor (PWR) Plant

2012 ◽  
Vol 9 (4) ◽  
pp. 104016 ◽  
Author(s):  
D. A. Thornton ◽  
D. A. Allen ◽  
A. P. Huggon ◽  
D. J. Picton ◽  
A. T. Robinson ◽  
...  
Keyword(s):  
Pressure Vessel ◽  
Reactor Pressure Vessel ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Reactor Pressure

Probabilistic Structural Integrity Evaluation on a Pressurized Water Reactor Pressure Vessel Under Pressure–Temperature Limit Operations

2015 ◽  
Author(s):  
Hsoung-Wei Chou ◽  
Chin-Cheng Huang
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Structural Integrity ◽  
Temperature Limit ◽  
Pressure Vessels ◽  
Pressurized Water Reactor ◽  
Operational Flexibility ◽  
Pressurized Water ◽  
Water Reactor ◽  
Reactor Pressure

The normal reactor startup (heat-up) and shut-down (cool-down) operation limits are defined by the ASME Code Section XI-Appendix G, to ensure the structural integrity of the embrittled nuclear reactor pressure vessels (RPVs). In the paper, the failure risks of a Taiwan domestic pressurized water reactor (PWR) pressure vessel under various pressure-temperature limit operations are analyzed. Three types of pressure-temperature limit curves established by different methodologies, which are the current operation limits of the domestic RPV based on the KIa fracture toughness curve in 1998 or earlier editions of ASME Section XI-Appendix G, the recently proposed limits according to the KIC fracture toughness curve after the 2001 edition of ASME Section XI-Appendix G, and the risk-informed revision method proposed in MRP-250 report that provides more operational flexibility, are considered. The ORNL’s probabilistic fracture mechanics code, FAVOR, is employed to perform a series of fracture probability analyses for the RPV at multiple levels of embrittlement under such pressure-temperature limit transients. The analysis results indicate that the pressure-temperature operation limits associated with more operational flexibility will result in higher failure risks to the RPV. The shallow inner surface breaking flaw due to the clad fabrication defect is the most critical factor and dominates the failure risk of the RPV under pressure-temperature limit operations. Present work can provide a risk-informed reference for the safe operation and regulation of PWRs in Taiwan.

Comparison of Pressure-Temperature Limits for a Pressurized Water Reactor Pressure Vessel Considering Beltline and Extended Beltline Regions

2018 ◽  
Author(s):  
Hsoung-Wei Chou ◽  
Yu-Yu Shen ◽  
Chin-Cheng Huang
Keyword(s):  
Pressure Vessel ◽  
Structural Integrity ◽  
Three Dimensional ◽  
Pressure Vessels ◽  
Reference Temperature ◽  
Regulatory Body ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Reactor Pressure

To ensure the structural integrity of the embrittled reactor pressure vessels (RPVs) during startup or shutdown operation, the pressure-temperature (P-T) limits are mainly determined by the fracture toughness of beltline region material with the highest level of neutron embrittlement. However, other vessel parts such as nozzles with structural discontinuities may affect the limits due to the higher stress concentration, even though the neutron embrittlement is insignificant. Therefore, not only beltline material with the highest reference temperature, but also other components with structural discontinuities have to be considered for the development of P-T limits of RPV. In the paper, the pressure-temperature operational limits of a Taiwan domestic pressurized water reactor (PWR) pressure vessel considering beltline and extended beltline regions are established per the procedure of ASME Code Section XI-Appendix G. The three-dimensional finite element models of PWR inlet and outlet nozzles above the beltline region are also built to analyze the pressure and thermal stress distributions for P-T limits calculation. The analysis results indicate that the cool-down P-T limit of the domestic PWR vessel is still dominated by the beltline region, but the heat-up limit is partially controlled by the extended beltline region. On the other hand, the relations of reference temperature between nozzles and beltline region on the P-T limits are also discussed. Present work could be a reference for the regulatory body and is also helpful for safe operation of PWRs in Taiwan.

Sign in / Sign up

Export Citation Format

Share Document