The objective of this study was to develop a model to estimate the axle torque (AT) of a tractor using an artificial neural network (ANN) based on a relatively low-cost sensor. ANN has proven to be useful in the case of nonlinear analysis, and it can be applied to consider nonlinear variables such as soil characteristics, unlike studies that only consider tractor major parameters, thus model performance and its implementation can be extended to a wider range. In this study, ANN-based models were compared with multiple linear regression (MLR)-based models for performance verification. The main input data were tractor engine parameters, major tractor parameters, and soil physical properties. Data of soil physical properties (i.e., soil moisture content and cone index) and major tractor parameters (i.e., engine torque, engine speed, specific fuel consumption, travel speed, tillage depth, and slip ratio) were collected during a tractor field experiment in four Korean paddy fields. The collected soil physical properties and major tractor parameter data were used to estimate the AT of the tractor by the MLR- and ANN-based models: 250 data points were used for developing and training the model were used, the 50 remaining data points were used to test the model estimation. The AT estimated with the developed MLR- and ANN-based models showed agreement with actual measured AT, with the R2 value ranging from 0.825 to 0.851 and from 0.857 to 0.904, respectively. These results suggest that the developed models are reliable in estimating tractor AT, while the ANN-based model showed better performance than the MLR-based model. This study can provide useful results as a simple method using ANNs based on relatively inexpensive sensors that can replace the existing complex tractor AT measurement method is emphasized.
Estimation of Axle Torque for an Agricultural Tractor Using an Artificial Neural Network
