Final report on supplementary comparison of the calibration of a 5 kg stainless steel standard weight between INDECOPI-PERÚ and CEM-ESPAÑA (SIM.M.M-S10)

Metrologia ◽  
2012 ◽  
Vol 49 (1A) ◽  
pp. 07010-07010
Author(s):  
Aldo Quiroga Rojas ◽  
María Nieves Medina
Keyword(s):  
Stainless Steel ◽  
Final Report ◽  
Steel Standard ◽  
Standard Weight

The final report for CCM.M-K7: key comparison of 5 kg, 100 g, 10 g, 5 g and 500 mg stainless steel mass standards

Metrologia ◽  
2016 ◽  
Vol 54 (1A) ◽  
pp. 07001-07001 ◽  
Author(s):  
Sungjun Lee ◽  
Michael Borys ◽  
Patrick Abbott ◽  
Luis Omar Becerra ◽  
Alaaeldin A Eltawil ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Final Report ◽  
Key Comparison

scholarly journals Determination of Susceptibility to Intergranular Corrosion of UNS 31803 Type Duplex Stainless Steel by Electrochemical Reactivation Method: A Comparative Study

2012 ◽  
Vol 2012 ◽  
pp. 1-14 ◽  
Author(s):  
Mehmet Emin Arıkan ◽  
Rafet Arıkan ◽  
Mustafa Doruk
Keyword(s):  
Weight Loss ◽  
Stainless Steel ◽  
Duplex Stainless Steel ◽  
Intergranular Corrosion ◽  
Intermetallic Phases ◽  
Double Loop ◽  
Degree Of Sensitization ◽  
Hot Rolled ◽  
Standard Weight

In the present study as in our previous studies (Arikan and Doruk, 2008 and Arikan et al., 2012), similar specimens taken from a hot rolled cylindrical duplex stainless steel (DSS) bar with 22% Cr grade were solution annealed at 1050°C and then aged at 800∘C from 100 to 31622 min for sensitization treatment. Double loop electrochemical potentiodynamic reactivation and standard weight loss immersion acid tests were conducted. The solution annealed samples were found unsensitized. The samples aged for 100 min were less sensitized whereas samples aged for 316 min and more time were sensitized. The degree of sensitization (DOS) can be attributed to higher contribution of chromium and molybdenum depleted areas that result from intermetallic phases. However, especially the samples aged from 3162 to 31622 min have revealed chromium replenishment. Consequently, the degree of sensitization was lowered in comparison to the results obtained in previous studies.

scholarly journals Determination of Susceptibility to Intergranular Corrosion of UNS 31803 Type Duplex Stainless Steel by Electrochemical Reactivation Method

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Mehmet Emin Arıkan ◽  
Rafet Arıkan ◽  
Mustafa Doruk
Keyword(s):  
Weight Loss ◽  
Stainless Steel ◽  
Duplex Stainless Steel ◽  
Intergranular Corrosion ◽  
Intermetallic Phases ◽  
Double Loop ◽  
Degree Of Sensitization ◽  
Hot Rolled ◽  
Standard Weight

Specimens taken from a hot-rolled cylindrical duplex stainless steel (DSS) bar with 22% Cr grade were solution annealed at1050∘C and then aged at725∘C from 100 to 31622 min for sensitization treatment. Double loop electrochemical potentiodynamic reactivation and standard weight loss immersion acid tests were conducted. The solution-annealed samples were found unsensitized. Those samples aged for 100 and 316 min were less sensitized whereas samples aged for 1000 min and especially those aged for 3162, 10000, and 31622 min were heavily sensitized. The degree of sensitization (DOS) can be attributed to higher contribution of chromium- and molybdenum-depleted areas resulting from intermetallic phases.

Sign in / Sign up

Export Citation Format

Share Document