The article summarizes research on essential contributors to energy dissipation in an actuator for an exemplary planetary exploration hopping robot. It was demonstrated that contact dynamics could vary significantly depending on the surface type. As a result, regolith is a significant uncertainty factor to the control loop and plays a significant contribution in the control system development of future planetary exploration robots. The actual prototype of the actuating mechanism was tested on a reference surface and then compared with various surfaces (i.e., Syar, quartz sand, expanded clay, and quartz aggregate) to estimate the dissipation of the energy in the initial phase of hopping. Test outcomes are compared with multibody analysis. The research enhances trajectory planning and adaptive control of future hopping robots by determining three significant types of energy losses in the system and, most importantly, determining energy dissipation coefficients in contact with the various surfaces (i.e., from 4% to 53% depending on the surface type). The actual step-by-step methodology is proposed to analyze energy dissipation aspects for a limited number of runs, as it is a case for space systems.
Energy Dissipation during Surface Interaction of an Underactuated Robot for Planetary Exploration
