Renewable Energy Resources Integration To Grid With Improved Power Quality Capabilities And Optimal Power Flows

Author(s):  
Kuppili Raviteja ◽  
Pratik Kumar Kar ◽  
Srinivas Bhaskar Karanki
Author(s):  
Toshiaki Kanemoto ◽  
Risa Kasahara ◽  
Hirotaka Honda ◽  
Toru Miyaji ◽  
Jin-Hyuk Kim

It is difficult, for renewable energy resources, to provide constant power with excellent quality for the grid system. This serial research proposes a power stabilization system with a pumped storage to guarantee the power quality and capacity, while the energy resources are at unstable and/or fluctuating conditions. The power stabilization system with the counter-rotating type pump-turbine unit was prepared and operated at the pumping and the turbine modes. The experiments have verified that this type pump-turbine unit is reasonably effective to stabilize momentarily/instantaneously the fluctuating power from the renewable energy resources.


In the modern era, most of the utility grid is connected with Renewable Energy resources (RERs). In addition to this, many power electronic converters and reactive power compensating devices are also incorporated into the existing grid. This makes the system complicated. Penetration of renewable energy resources affect many power system parameters like grid stability, quality of power, reactive power balance and Sufficient energy utilization. However, the Distributed Generation (DG) towards the power electronic interface creates some critical power quality events such as reactive power management, harmonics and voltage profile which makes the distributed system become a polluted one. This paper depicts the review of modelling and incorporation of various reactive power compensating devices like TCSC, SVC and STATCOM into RES. Power generation model of solar, wind and fuel farm is discussed in this paper. Reactive power compensating devices and its location and sizing are important for the stable and secure operation of the electric grid. Consequently, power quality issues, real-time interconnection issues and policies related to reactive power management are in this paper.


Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 6066
Author(s):  
Khaled Nusair ◽  
Lina Alhmoud

In recent decades, the energy market around the world has been reshaped to accommodate the high penetration of renewable energy resources. Although renewable energy sources have brought various benefits, including low operation cost of wind and solar PV power plants, and reducing the environmental risks associated with the conventional power resources, they have imposed a wide range of difficulties in power system planning and operation. Naturally, classical optimal power flow (OPF) is a nonlinear problem. Integrating renewable energy resources with conventional thermal power generators escalates the difficulty of the OPF problem due to the uncertain and intermittent nature of these resources. To address the complexity associated with the process of the integration of renewable energy resources into the classical electric power systems, two probability distribution functions (Weibull and lognormal) are used to forecast the voltaic power output of wind and solar photovoltaic, respectively. Optimal power flow, including renewable energy, is formulated as a single-objective and multi-objective problem in which many objective functions are considered, such as minimizing the fuel cost, emission, real power loss, and voltage deviation. Real power generation, bus voltage, load tap changers ratios, and shunt compensators values are optimized under various power systems’ constraints. This paper aims to solve the OPF problem and examines the effect of renewable energy resources on the above-mentioned objective functions. A combined model of wind integrated IEEE 30-bus system, solar PV integrated IEEE 30-bus system, and hybrid wind and solar PV integrated IEEE 30-bus system is performed using the equilibrium optimizer technique (EO) and other five heuristic search methods. A comparison of simulation and statistical results of EO with other optimization techniques showed that EO is more effective and superior and provides the lowest optimization value in term of electric power generation, real power loss, emission index and voltage deviation.


Sign in / Sign up

Export Citation Format

Share Document