Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures

2013 ◽  
Author(s):  

The influence of pressure, velocity, turbulence intensity, turbulence scale and mixture composition on minimum ignition energy and quenching distance in flowing gaseous mixtures is examined experimentally for methane and propane fuels. In some experiments, the nitrogen in the air is replaced by various inert gases such as carbon dioxide, helium or argon, while in others the nitrogen is either partly or totally replaced by oxygen. The tests are conducted at room temperature in a 9 cm square working section through which the combustible mixture is arranged to flow at various levels of pressure, turbulence and velocity. At each test condition, the spark energy required to ignite the flowing mixture is measured for several gap widths in order to establish the optimum gap width corresponding to minimum ignition energy. From analysis of the relevant combustion and heat transfer processes involved, expressions for the prediction of quenching distance in flowing mixtures are derived. Support for the model employed in this analysis is demonstrated by a close level of agreement between theoretical predictions of quenching distance and corresponding values calculated from the experimental data on minimum ignition energy obtained over a wide range of mixture compositions and flow conditions.


A model is proposed for the ignition of quiescent multidroplet fuel mists which assumes that chemical reaction rates are infinitely fast, and that the sole criterion for successful ignition is the generation, by the spark, of an adequate concentration of fuel vapour in the ignition zone. From analysis of the relevant heat transfer and evaporation processes involved, ex­pressions are derived for the prediction of quenching distance and minimum ignition energy. Support for the model is demonstrated by a close level of agreement between theoretical predictions of minimum ignition energy and the corresponding experimental values obtained using a specially designed ignition apparatus in which ignition energies are measured for several different fuels, over wide ranges of pressure, mixture composition and mean drop size. The results show that both quenching distance and mini­mum ignition energy are strongly dependent on droplet size, and are also dependent, but to a lesser extent, on air density, equivalence ratio and fuel volatility. An expression is derived to indicate the range of drop sizes over which the proposed model is valid.


2021 ◽  
Author(s):  
Meet Parikh ◽  
Rinrin Saeki ◽  
Rajib Mondal ◽  
Kwangseok Choi ◽  
Wookyung Kim

Sign in / Sign up

Export Citation Format

Share Document